Bump to 4.0.1

The wait time wasn't long enough causing the thread to
terminate prematurely.
Also, to avoid crashing qbt entirely when creating a torrent for a very
big file, I decided to wait indefinitely here.

.appveyor.yml

@@ -0,0 +1,58 @@
+version: '{branch}-{build}'
+
+# Do not build on tags (GitHub only)
+skip_tags: true
+
+image: Visual Studio 2017
+
+branches:
+  except:  # blacklist
+    - coverity_scan
+
+environment:
+  REPO_DIR: &REPO_DIR c:\qbittorrent
+  CACHE_DIR: &CACHE_DIR c:\qbt_cache
+
+  QBT_VER_URL: https://builds.shiki.hu/appveyor/version
+  QBT_LIB_URL: https://builds.shiki.hu/appveyor/qbt_libraries.7z
+
+# project directory
+clone_folder: *REPO_DIR
+
+# cache size should < 100MB (after compressing with fastest option):
+# see: https://www.appveyor.com/docs/build-cache#save-update-cache-before-build-finishes
+cache:
+  - *CACHE_DIR
+
+clone_depth: 50
+
+install:
+  # check if library needs update
+  - appveyor DownloadFile "%QBT_VER_URL%" -FileName "c:\version_new" && SET /P newVersion=<"c:\version_new"
+  - IF EXIST "%CACHE_DIR%\version" (SET /P oldVersion=<"%CACHE_DIR%\version")
+  - IF NOT EXIST "%CACHE_DIR%\version" (SET updateCache=1)
+  - IF NOT "%oldVersion%" == "%newVersion%" (SET updateCache=1)
+  # update library
+  - IF "%updateCache%" == "1" (ECHO "--- Will redownload libraries ---" &&
+      RMDIR /S /Q "%CACHE_DIR%" & MKDIR "%CACHE_DIR%" &&
+      appveyor DownloadFile "%QBT_LIB_URL%" -FileName "c:\qbt_lib.7z" && 7z x "c:\qbt_lib.7z" -o"%CACHE_DIR%" > nul &&
+      COPY "c:\version_new" "%CACHE_DIR%\version")
+  # Qt stay compressed in cache
+  - 7z x "%CACHE_DIR%\qt5_32.7z" -o"c:\qbt" > nul
+
+before_build:
+  # setup env
+  - CALL "C:\Program Files (x86)\Microsoft Visual Studio\2017\Community\VC\Auxiliary\Build\vcvars32.bat"
+  - SET PATH=%PATH%;c:\qbt\qt5_32\bin;%CACHE_DIR%\jom;
+  # setup project
+  - COPY /Y "%CACHE_DIR%\winconf.pri" "%REPO_DIR%"
+  - COPY /Y "%CACHE_DIR%\winconf-msvc.pri" "%REPO_DIR%"
+  # workarounds
+  - MKLINK /J "c:\qbt\base" "%CACHE_DIR%\base"
+
+build_script:
+  - cd "%REPO_DIR%"
+  - qmake qbittorrent.pro && cd src && qmake src.pro
+  - jom -j2 -f Makefile.Release
+
+test: off

.clang-tidy

@@ -1,81 +0,0 @@
-Checks: >
-  bugprone-*,
-  cert-*,
-  concurrency-*,
-  cppcoreguidelines-*,
-  misc-*,
-  modernize-*,
-  performance-*,
-  portability-*,
-  readability-*,
-  -# not applicable at all,
-  -bugprone-easily-swappable-parameters,
-  -bugprone-implicit-widening-of-multiplication-result,
-  -bugprone-macro-parentheses,
-  -cppcoreguidelines-avoid-c-arrays,
-  -cppcoreguidelines-avoid-magic-numbers,
-  -cppcoreguidelines-avoid-non-const-global-variables,
-  -cppcoreguidelines-macro-usage,
-  -cppcoreguidelines-non-private-member-variables-in-classes,
-  -cppcoreguidelines-owning-memory,
-  -cppcoreguidelines-pro-bounds-array-to-pointer-decay,
-  -cppcoreguidelines-pro-bounds-constant-array-index,
-  -cppcoreguidelines-pro-bounds-pointer-arithmetic,
-  -cppcoreguidelines-pro-type-const-cast,
-  -cppcoreguidelines-pro-type-reinterpret-cast,
-  -cppcoreguidelines-pro-type-union-access,
-  -cppcoreguidelines-pro-type-vararg,
-  -cppcoreguidelines-special-member-functions,
-  -cppcoreguidelines-virtual-class-destructor,
-  -misc-no-recursion,
-  -misc-non-private-member-variables-in-classes,
-  -misc-unused-parameters,
-  -modernize-avoid-c-arrays,
-  -modernize-pass-by-value,
-  -modernize-use-auto,
-  -modernize-use-nodiscard,
-  -modernize-use-trailing-return-type,
-  -readability-function-cognitive-complexity,
-  -readability-function-size,
-  -readability-identifier-length,
-  -readability-implicit-bool-conversion,
-  -readability-isolate-declaration,
-  -readability-magic-numbers,
-  -readability-named-parameter,
-  -readability-redundant-access-specifiers,
-  -readability-simplify-boolean-expr,
-  -readability-uppercase-literal-suffix,
-  -# only sometimes useful,
-  -bugprone-narrowing-conversions,
-  -cert-dcl58-cpp,
-  -cert-err33-c,
-  -cert-err58-cpp,
-  -clang-analyzer-core.CallAndMessage,
-  -clang-analyzer-cplusplus.NewDelete,
-  -clang-analyzer-cplusplus.NewDeleteLeaks,
-  -concurrency-mt-unsafe,
-  -cppcoreguidelines-init-variables,
-  -cppcoreguidelines-narrowing-conversions,
-  -cppcoreguidelines-prefer-member-initializer,
-  -cppcoreguidelines-pro-type-static-cast-downcast,
-  -misc-definitions-in-headers,
-  -modernize-concat-nested-namespaces,
-  -modernize-loop-convert,
-  -modernize-raw-string-literal,
-  -modernize-unary-static-assert,
-  -performance-no-automatic-move,
-  -readability-convert-member-functions-to-static,
-  -readability-else-after-return,
-  -readability-redundant-declaration,
-  -# obsoleted,
-  -cert-dcl21-cpp
-
-CheckOptions:
-  - { key: cppcoreguidelines-explicit-virtual-functions.IgnoreDestructors, value: true }
-  - { key: modernize-use-override.IgnoreDestructors, value: true }
-  - { key: performance-for-range-copy.AllowedTypes, value: "QJsonValue" }
-  - { key: performance-for-range-copy.WarnOnAllAutoCopies, value: true }
-  - { key: readability-braces-around-statements.ShortStatementLines, value: 3 }
-
-HeaderFilterRegex: ".+/src/.*\\.h"
-WarningsAsErrors: "*"

.editorconfig

@@ -1,10 +1,8 @@
-# EditorConfig is awesome: https://EditorConfig.org
+# EditorConfig is awesome: http://EditorConfig.org
 
 root = true
 
 [*]
-charset = utf-8
-end_of_line = lf
 indent_style = space
 indent_size = 4
 insert_final_newline = true

.gitattributes

@@ -1,10 +1,7 @@
 core.eol=lf
 * text eol=lf
-*.icns binary
-*.ico binary
-*.png binary
-*.qm binary
 *.zip binary
-
-dist/windows/license.txt text eol=crlf
-test/testdata/crlf.txt text eol=crlf
+*.png binary
+*.ico binary
+*.qm binary
+*.icns binary

.github/FUNDING.yml

@@ -1 +0,0 @@
-custom: "https://www.qbittorrent.org/donate.php"

.github/ISSUE_TEMPLATE.md

@@ -0,0 +1,20 @@
+**Please provide the following information**
+
+### qBittorrent version and Operating System
+(type here)
+
+### If on linux, libtorrent and Qt version
+(type here)
+
+### What is the problem
+(type here)
+
+### What is the expected behavior
+(type here)
+
+### Steps to reproduce
+(type here)
+
+### Extra info(if any)
+(type here)
+

.github/ISSUE_TEMPLATE/bug_report.yml

@@ -1,76 +0,0 @@
-name: Bug Report
-description: File a bug report to help improve qBittorrent user experience.
-body:
-  - type: markdown
-    attributes:
-      value: |
-        #### ADVISORY
-        "We do not support any versions older than the current release series"
-
-        "We do not support any 3rd party/forked versions e.g. `portableapps`/`Enhanced Edition`etc."
-
-        "Please post all details in **English**."
-
-        #### Prerequisites before submitting an issue!
-        - Read the issue reporting section in the **[contributing guidelines](https://github.com/qbittorrent/qBittorrent/blob/master/CONTRIBUTING.md)**, to know how to submit a good bug report with the required information.
-        - Verify that the issue is not fixed and is reproducible in the **[latest official qBittorrent version](https://www.qbittorrent.org/download.php).**
-        - (Optional, but recommended) Verify that the issue is not fixed and is reproducible in the latest CI (currently only on **[Windows](https://github.com/qbittorrent/qBittorrent/actions/workflows/ci_windows.yaml?query=branch%3Amaster+event%3Apush)**) builds.
-        - Check the **[frequent/common issues list](https://github.com/qbittorrent/qBittorrent/projects/2)** and perform a **[search of the issue tracker (including closed ones)](https://github.com/qbittorrent/qBittorrent/issues)** to avoid posting a duplicate.
-        - Make sure this is not a support request or question, both of which are better suited for either the **[discussions section](https://github.com/qbittorrent/qBittorrent/discussions)**, **[forum](https://qbforums.shiki.hu/)**, or **[subreddit](https://www.reddit.com/r/qBittorrent/)**.
-        - Verify that the **[wiki](https://github.com/qbittorrent/qBittorrent/wiki)** did not contain a suitable solution either.
-        - If relevant to issue/when asked, the qBittorrent preferences file, qBittorrent.log & watched_folders.json (if using "Watched Folders" feature) must be provided.
-          See **[Where does qBittorrent save its settings?](https://github.com/qbittorrent/qBittorrent/wiki/Frequently-Asked-Questions#Where_does_qBittorrent_save_its_settings)**
-
-  - type: textarea
-    attributes:
-      label: qBittorrent & operating system versions
-      description: |
-        Qt and libtorrent-rasterbar versions are required when: 1. You are using linux. 2. You are not using an official build downloaded from our website.
-
-        Example of preferred formatting:
-        qBittorrent: 4.3.7 x64
-        Operating system: Windows 10 Pro 21H1/2009 x64
-        Qt: 5.15.2
-        libtorrent-rasterbar: 1.2.14
-      placeholder: |
-        qBittorrent:
-        Operating system:
-        Qt:
-        libtorrent-rasterbar:
-    validations:
-      required: true
-
-  - type: textarea
-    attributes:
-      label: What is the problem?
-      description: Please add the "crash report" (if encountered) or give a clear and concise description of problem.
-    validations:
-      required: true
-
-  - type: textarea
-    attributes:
-      label: Steps to reproduce
-      description: Please provide reliable steps to reproduce the problem.
-      placeholder: |
-        1. First step
-        2. Second step
-        3. and so on...
-    validations:
-      required: false
-
-  - type: textarea
-    attributes:
-      label: Additional context
-      description: Add screenshots etc. (Anything that will provide more context about the problem)
-    validations:
-      required: false
-
-  - type: textarea
-    attributes:
-      label: Log(s) & preferences file(s)
-      description: |
-        Add these files: qBittorrent preferences file, qBittorrent.log & watched_folders.json (if using "Watched Folders" feature).
-        See **[Where does qBittorrent save its settings?](https://github.com/qbittorrent/qBittorrent/wiki/Frequently-Asked-Questions#Where_does_qBittorrent_save_its_settings)**
-        #### Note: It's the user's responsibility to redact any sensitive information
-    validations:
-      required: false

.github/ISSUE_TEMPLATE/config.yml

@@ -1,17 +0,0 @@
-blank_issues_enabled: false
-contact_links:
-  - name: Wiki
-    url: "https://github.com/qbittorrent/qBittorrent/wiki/"
-    about: "Consult the wiki first (especially the FAQ), it might already contain the information you are looking for"
-
-  - name: Question
-    url: "https://github.com/qbittorrent/qBittorrent/discussions"
-    about: "Please ask questions related to usage/setup/support/non-issue development discussion in the Discussions section"
-
-  - name: Question
-    url: "http://forum.qbittorrent.org/"
-    about: "Alternatively, ask on the official forum"
-
-  - name: Question
-    url: "https://www.reddit.com/r/qBittorrent/"
-    about: "Alternatively, use the subreddit"

.github/ISSUE_TEMPLATE/feature_request.yml

@@ -1,37 +0,0 @@
-name: Feature Request
-description: Suggest a new feature or enhancement for qBittorrent.
-labels: ["Feature request"]
-body:
-  - type: markdown
-    attributes:
-      value: |
-        #### ADVISORY
-
-        "Please post all details in **English**."
-
-        #### Prerequisites before submitting a feature request!
-        - Read the feature request section in the **[contributing guidelines](https://github.com/qbittorrent/qBittorrent/blob/master/CONTRIBUTING.md)**, to know how to submit a good feature request with the required information.
-        - Verify that the feature being requested is not available in the **[latest official qBittorrent version](https://www.qbittorrent.org/download.php).**
-        - (Optional but recommended) Verify that the feature being requested is not available in the latest CI (**[macOS](https://github.com/qbittorrent/qBittorrent/actions/workflows/ci_macos.yaml?query=branch%3Amaster+event%3Apush)** / **[Ubuntu](https://github.com/qbittorrent/qBittorrent/actions/workflows/ci_ubuntu.yaml?query=branch%3Amaster+event%3Apush)** / **[Windows](https://github.com/qbittorrent/qBittorrent/actions/workflows/ci_windows.yaml?query=branch%3Amaster+event%3Apush)**) builds.
-        - Search the issue tracker with the **[feature request filter](https://github.com/qbittorrent/qBittorrent/issues?q=is%3Aopen+is%3Aissue+label%3A%22Feature+request%22)** for similar feature requests (including closed ones) to avoid posting a duplicate.
-        - Make sure this is not a support request or question, both of which are better suited for either the **[discussions section](https://github.com/qbittorrent/qBittorrent/discussions)**, **[forum](https://qbforums.shiki.hu/)**, or **[subreddit](https://www.reddit.com/r/qBittorrent/)**.
-        - Verify that the **[wiki](https://github.com/qbittorrent/qBittorrent/wiki)** did not contain a suitable solution either.
-
-  - type: textarea
-    attributes:
-      label: Suggestion
-    validations:
-      required: false
-
-  - type: textarea
-    attributes:
-      label: Use case
-    validations:
-      required: false
-
-  - type: textarea
-    attributes:
-      label: Extra info/examples/attachments
-      description: Add screenshots etc. (Anything that will give us more context about what is being requested!)
-    validations:
-      required: false

.github/PULL_REQUEST_TEMPLATE.md

@@ -1,5 +0,0 @@
-<!--
-MANDATORY Before submitting your work, make sure you have:
-1. Read https://github.com/qbittorrent/qBittorrent/blob/master/CONTRIBUTING.md#opening-a-pull-request
-2. Delete this comment block
--->

.github/SUPPORT.md

@@ -1,18 +0,0 @@
-# Support Resources
-
-The issue tracker is only for bug reports/feature requests related to the project itself.
-
-Please do not use the issue tracker for questions about general program usage,
-how BitTorrent (the protocol) works in general, etc.
-
-For such questions, use one of the following community support resources:
-
-* The [discussions section][discussions-url]
-
-* The [official forum][forum-url]
-
-* The [qBittorrent subreddit][subreddit-url]
-
-[discussions-url]: https://github.com/qbittorrent/qBittorrent/discussions
-[forum-url]: http://forum.qbittorrent.org/
-[subreddit-url]: https://www.reddit.com/r/qBittorrent/

.github/dependabot.yml

@@ -1,15 +0,0 @@
-version: 2
-
-updates:
-  - package-ecosystem: "github-actions"
-    directory: "/"
-    commit-message:
-      prefix: "GHA CI"
-    groups:
-      github-actions:
-        patterns:
-          - "*"
-    labels:
-      - "CI"
-    schedule:
-      interval: "monthly"

.github/workflows/ci_file_health.yaml

@@ -1,44 +0,0 @@
-name: CI - File health
-
-on: [pull_request, push]
-
-permissions: {}
-
-concurrency:
-  group: ${{ github.workflow }}-${{ github.head_ref || github.run_id }}
-  cancel-in-progress: ${{ github.head_ref != '' }}
-
-jobs:
-  ci:
-    name: Check
-    runs-on: ubuntu-latest
-    steps:
-      - name: Checkout repository
-        uses: actions/checkout@v4
-
-      - name: Install tools
-        uses: actions/setup-python@v5
-        with:
-          python-version: "*"
-
-      - name: Check files
-        uses: pre-commit/action@v3.0.1
-
-      - name: Check doc
-        env:
-          pandoc_path: "${{ github.workspace }}/../pandoc"
-        run: |
-          # install pandoc
-          curl \
-            -L \
-            -o "${{ runner.temp }}/pandoc.tar.gz" \
-            "https://github.com/jgm/pandoc/releases/download/3.1.7/pandoc-3.1.7-linux-amd64.tar.gz"
-          tar -xf "${{ runner.temp }}/pandoc.tar.gz" -C "${{ github.workspace }}/.."
-          mv "${{ github.workspace }}/.."/pandoc-* "${{ env.pandoc_path }}"
-          # run pandoc
-          for lang in doc/*/; do
-            "${{ env.pandoc_path }}/bin/pandoc" -f markdown -t man -s "$lang/qbittorrent.1.md" -o "$lang/qbittorrent.1"
-            "${{ env.pandoc_path }}/bin/pandoc" -f markdown -t man -s "$lang/qbittorrent-nox.1.md" -o "$lang/qbittorrent-nox.1"
-          done
-          # check diff, ignore "Automatically generated by ..." part
-          git diff -I '\.\\".*' --exit-code

.github/workflows/ci_macos.yaml

@@ -1,149 +0,0 @@
-name: CI - macOS
-
-on: [pull_request, push]
-
-permissions:
-  actions: write
-
-concurrency:
-  group: ${{ github.workflow }}-${{ github.head_ref || github.run_id }}
-  cancel-in-progress: ${{ github.head_ref != '' }}
-
-jobs:
-  ci:
-    name: Build
-    runs-on: macos-latest
-
-    strategy:
-      fail-fast: false
-      matrix:
-        libt_version: ["2.0.10", "1.2.19"]
-        qbt_gui: ["GUI=ON", "GUI=OFF"]
-        qt_version: ["6.7.0"]
-
-    env:
-      boost_path: "${{ github.workspace }}/../boost"
-      libtorrent_path: "${{ github.workspace }}/../libtorrent"
-
-    steps:
-      - name: Checkout repository
-        uses: actions/checkout@v4
-
-      - name: Install dependencies
-        uses: Wandalen/wretry.action@v3
-        env:
-           HOMEBREW_NO_INSTALLED_DEPENDENTS_CHECK: 1
-           HOMEBREW_NO_INSTALL_CLEANUP: 1
-        with:
-          attempt_delay: 20000
-          attempt_limit: 6
-          command: |
-            brew update > /dev/null
-            brew install \
-              cmake ninja \
-              openssl@3 zlib
-
-      - name: Setup ccache
-        uses: Chocobo1/setup-ccache-action@v1
-        with:
-          store_cache: ${{ github.ref == 'refs/heads/master' }}
-          update_packager_index: false
-          ccache_options: |
-            max_size=2G
-
-      - name: Install boost
-        env:
-          BOOST_MAJOR_VERSION: "1"
-          BOOST_MINOR_VERSION: "85"
-          BOOST_PATCH_VERSION: "0"
-        run: |
-          boost_url="https://boostorg.jfrog.io/artifactory/main/release/${{ env.BOOST_MAJOR_VERSION }}.${{ env.BOOST_MINOR_VERSION }}.${{ env.BOOST_PATCH_VERSION }}/source/boost_${{ env.BOOST_MAJOR_VERSION }}_${{ env.BOOST_MINOR_VERSION }}_${{ env.BOOST_PATCH_VERSION }}.tar.gz"
-          boost_url2="https://sourceforge.net/projects/boost/files/boost/${{ env.BOOST_MAJOR_VERSION }}.${{ env.BOOST_MINOR_VERSION }}.${{ env.BOOST_PATCH_VERSION }}/boost_${{ env.BOOST_MAJOR_VERSION }}_${{ env.BOOST_MINOR_VERSION }}_${{ env.BOOST_PATCH_VERSION }}.tar.gz"
-          set +e
-          curl -L -o "${{ runner.temp }}/boost.tar.gz" "$boost_url"
-          tar -xf "${{ runner.temp }}/boost.tar.gz" -C "${{ github.workspace }}/.."; _exitCode="$?"
-          if [ "$_exitCode" -ne "0" ]; then
-            curl -L -o "${{ runner.temp }}/boost.tar.gz" "$boost_url2"
-            tar -xf "${{ runner.temp }}/boost.tar.gz" -C "${{ github.workspace }}/.."; _exitCode="$?"
-          fi
-          mv "${{ github.workspace }}/.."/boost_* "${{ env.boost_path }}"
-
-      - name: Install Qt
-        uses: jurplel/install-qt-action@v4
-        with:
-          version: ${{ matrix.qt_version }}
-          archives: qtbase qtdeclarative qtsvg qttools
-          # Not sure why Qt made a hard dependency on qtdeclarative, try removing it when Qt > 6.4.0
-          cache: true
-
-      - name: Install libtorrent
-        run: |
-          git clone \
-            --branch v${{ matrix.libt_version }} \
-            --depth 1 \
-            --recurse-submodules \
-            https://github.com/arvidn/libtorrent.git \
-            ${{ env.libtorrent_path }}
-          cd ${{ env.libtorrent_path }}
-          cmake \
-            -B build \
-            -G "Ninja" \
-            -DBUILD_SHARED_LIBS=OFF \
-            -DCMAKE_BUILD_TYPE=RelWithDebInfo \
-            -DCMAKE_CXX_STANDARD=17 \
-            -DCMAKE_EXPORT_COMPILE_COMMANDS=ON \
-            -DBOOST_ROOT="${{ env.boost_path }}" \
-            -Ddeprecated-functions=OFF
-          cmake --build build
-          sudo cmake --install build
-
-      - name: Build qBittorrent
-        run: |
-          CXXFLAGS="$CXXFLAGS -Werror -Wno-error=deprecated-declarations" \
-          LDFLAGS="$LDFLAGS -gz" \
-          cmake \
-            -B build \
-            -G "Ninja" \
-            -DCMAKE_BUILD_TYPE=RelWithDebInfo \
-            -DCMAKE_EXPORT_COMPILE_COMMANDS=ON \
-            -DBOOST_ROOT="${{ env.boost_path }}" \
-            -DTESTING=ON \
-            -DVERBOSE_CONFIGURE=ON \
-            -D${{ matrix.qbt_gui }}
-          cmake --build build --target qbt_update_translations
-          cmake --build build
-          cmake --build build --target check
-
-      - name: Prepare build artifacts
-        run: |
-          # create .dmg
-          appName="qbittorrent"
-          if [ "${{ matrix.qbt_gui }}" = "GUI=OFF" ]; then
-            appName="qbittorrent-nox"
-          fi
-          # package
-          pushd build
-          PACKAGE_RETRY=0
-          while [ "$PACKAGE_RETRY" -lt "3" ]; do
-            macdeployqt "$appName.app" -dmg -no-strip
-            if [ -f "$appName.dmg" ]; then
-              break
-            fi
-            sleep 5
-            PACKAGE_RETRY=$((PACKAGE_RETRY + 1))
-            echo "Retry $PACKAGE_RETRY..."
-          done
-          popd
-          # prepare upload folder
-          mkdir upload
-          cp "build/$appName.dmg" upload
-          mkdir upload/cmake
-          cp build/compile_commands.json upload/cmake
-          mkdir upload/cmake/libtorrent
-          cp ${{ env.libtorrent_path }}/build/compile_commands.json upload/cmake/libtorrent
-
-      - name: Upload build artifacts
-        uses: actions/upload-artifact@v4
-        with:
-          name: qBittorrent-CI_macOS_${{ matrix.qbt_gui }}_libtorrent-${{ matrix.libt_version }}_Qt-${{ matrix.qt_version }}
-          path: upload

.github/workflows/ci_python.yaml

@@ -1,89 +0,0 @@
-name: CI - Python
-
-on: [pull_request, push]
-
-permissions: {}
-
-concurrency:
-  group: ${{ github.workflow }}-${{ github.head_ref || github.run_id }}
-  cancel-in-progress: ${{ github.head_ref != '' }}
-
-jobs:
-  ci:
-    name: Check
-    runs-on: ubuntu-latest
-
-    steps:
-      - name: Checkout repository
-        uses: actions/checkout@v4
-
-      - name: Setup python (auxiliary scripts)
-        uses: actions/setup-python@v5
-        with:
-          python-version: '3'  # use default version
-
-      - name: Install tools (auxiliary scripts)
-        run: pip install bandit pycodestyle pyflakes
-
-      - name: Gather files (auxiliary scripts)
-        run: |
-          export "PY_FILES=$(find . -type f -name '*.py' ! -path '*searchengine*' -printf '%p ')"
-          echo $PY_FILES
-          echo "PY_FILES=$PY_FILES" >> "$GITHUB_ENV"
-
-      - name: Lint code (auxiliary scripts)
-        run: |
-          pyflakes $PY_FILES
-          bandit --skip B314,B405 $PY_FILES
-
-      - name: Format code (auxiliary scripts)
-        run: |
-          pycodestyle \
-            --max-line-length=1000 \
-            --statistics \
-            $PY_FILES
-
-      - name: Build code (auxiliary scripts)
-        run: |
-          python -m compileall $PY_FILES
-
-      - name: Setup python (search engine)
-        uses: actions/setup-python@v5
-        with:
-          python-version: '3.7'
-
-      - name: Install tools (search engine)
-        run: pip install bandit mypy pycodestyle pyflakes pyright
-
-      - name: Gather files (search engine)
-        run: |
-          export "PY_FILES=$(find . -type f -name '*.py' -path '*searchengine*' ! -name 'socks.py' -printf '%p ')"
-          echo $PY_FILES
-          echo "PY_FILES=$PY_FILES" >> "$GITHUB_ENV"
-
-      - name: Check typings  (search engine)
-        run: |
-          MYPYPATH="src/searchengine/nova3" \
-          mypy \
-            --follow-imports skip \
-            --strict \
-            $PY_FILES
-          pyright \
-            $PY_FILES
-
-      - name: Lint code (search engine)
-        run: |
-          pyflakes $PY_FILES
-          bandit --skip B110,B310,B314,B405 $PY_FILES
-
-      - name: Format code (search engine)
-        run: |
-          pycodestyle \
-            --ignore=E265,E402 \
-            --max-line-length=1000 \
-            --statistics \
-            $PY_FILES
-
-      - name: Build code (search engine)
-        run: |
-          python -m compileall $PY_FILES

.github/workflows/ci_ubuntu.yaml

@@ -1,170 +0,0 @@
-name: CI - Ubuntu
-
-on: [pull_request, push]
-
-permissions:
-  actions: write
-  security-events: write
-
-concurrency:
-  group: ${{ github.workflow }}-${{ github.head_ref || github.run_id }}
-  cancel-in-progress: ${{ github.head_ref != '' }}
-
-jobs:
-  ci:
-    name: Build
-    runs-on: ubuntu-latest
-
-    strategy:
-      fail-fast: false
-      matrix:
-        libt_version: ["2.0.10", "1.2.19"]
-        qbt_gui: ["GUI=ON", "GUI=OFF"]
-        qt_version: ["6.5.2"]
-
-    env:
-      boost_path: "${{ github.workspace }}/../boost"
-      harden_flags: "-D_FORTIFY_SOURCE=2 -D_GLIBCXX_ASSERTIONS"
-      libtorrent_path: "${{ github.workspace }}/../libtorrent"
-
-    steps:
-      - name: Checkout repository
-        uses: actions/checkout@v4
-
-      - name: Install dependencies
-        run: |
-          sudo apt update
-          sudo apt install \
-            build-essential cmake ninja-build \
-            libssl-dev libxkbcommon-x11-dev libxcb-cursor-dev zlib1g-dev
-
-      - name: Setup ccache
-        uses: Chocobo1/setup-ccache-action@v1
-        with:
-          store_cache: ${{ github.ref == 'refs/heads/master' }}
-          update_packager_index: false
-          ccache_options: |
-            max_size=2G
-
-      - name: Install boost
-        env:
-          BOOST_MAJOR_VERSION: "1"
-          BOOST_MINOR_VERSION: "76"
-          BOOST_PATCH_VERSION: "0"
-        run: |
-          boost_url="https://boostorg.jfrog.io/artifactory/main/release/${{ env.BOOST_MAJOR_VERSION }}.${{ env.BOOST_MINOR_VERSION }}.${{ env.BOOST_PATCH_VERSION }}/source/boost_${{ env.BOOST_MAJOR_VERSION }}_${{ env.BOOST_MINOR_VERSION }}_${{ env.BOOST_PATCH_VERSION }}.tar.gz"
-          boost_url2="https://sourceforge.net/projects/boost/files/boost/${{ env.BOOST_MAJOR_VERSION }}.${{ env.BOOST_MINOR_VERSION }}.${{ env.BOOST_PATCH_VERSION }}/boost_${{ env.BOOST_MAJOR_VERSION }}_${{ env.BOOST_MINOR_VERSION }}_${{ env.BOOST_PATCH_VERSION }}.tar.gz"
-          set +e
-          curl -L -o "${{ runner.temp }}/boost.tar.gz" "$boost_url"
-          tar -xf "${{ runner.temp }}/boost.tar.gz" -C "${{ github.workspace }}/.."; _exitCode="$?"
-          if [ "$_exitCode" -ne "0" ]; then
-            curl -L -o "${{ runner.temp }}/boost.tar.gz" "$boost_url2"
-            tar -xf "${{ runner.temp }}/boost.tar.gz" -C "${{ github.workspace }}/.."; _exitCode="$?"
-          fi
-          mv "${{ github.workspace }}/.."/boost_* "${{ env.boost_path }}"
-
-      - name: Install Qt
-        uses: jurplel/install-qt-action@v4
-        with:
-          version: ${{ matrix.qt_version }}
-          archives: icu qtbase qtdeclarative qtsvg qttools
-          cache: true
-
-      - name: Install libtorrent
-        run: |
-          git clone \
-            --branch v${{ matrix.libt_version }} \
-            --depth 1 \
-            --recurse-submodules \
-            https://github.com/arvidn/libtorrent.git \
-            ${{ env.libtorrent_path }}
-          cd ${{ env.libtorrent_path }}
-          CXXFLAGS="$CXXFLAGS ${{ env.harden_flags }}" \
-          cmake \
-            -B build \
-            -G "Ninja" \
-            -DBUILD_SHARED_LIBS=OFF \
-            -DCMAKE_BUILD_TYPE=RelWithDebInfo \
-            -DCMAKE_EXPORT_COMPILE_COMMANDS=ON \
-            -DBOOST_ROOT="${{ env.boost_path }}" \
-            -Ddeprecated-functions=OFF
-          cmake --build build
-          sudo cmake --install build
-
-      # to avoid scanning 3rdparty codebases, initialize it just before building qbt
-      - name: Initialize CodeQL
-        uses: github/codeql-action/init@v3
-        if: startsWith(matrix.libt_version, 2) && (matrix.qbt_gui == 'GUI=ON')
-        with:
-          config-file: ./.github/workflows/helper/codeql/cpp.yaml
-          languages: cpp
-
-      - name: Build qBittorrent
-        run: |
-          CXXFLAGS="$CXXFLAGS ${{ env.harden_flags }} -Werror" \
-          LDFLAGS="$LDFLAGS -gz" \
-          cmake \
-            -B build \
-            -G "Ninja" \
-            -DCMAKE_BUILD_TYPE=RelWithDebInfo \
-            -DCMAKE_EXPORT_COMPILE_COMMANDS=ON \
-            -DBOOST_ROOT="${{ env.boost_path }}" \
-            -DCMAKE_INSTALL_PREFIX="/usr" \
-            -DTESTING=ON \
-            -DVERBOSE_CONFIGURE=ON \
-            -D${{ matrix.qbt_gui }}
-          cmake --build build --target qbt_update_translations
-          cmake --build build
-          cmake --build build --target check
-          DESTDIR="qbittorrent" cmake --install build
-
-      - name: Run CodeQL analysis
-        uses: github/codeql-action/analyze@v3
-        if: startsWith(matrix.libt_version, 2) && (matrix.qbt_gui == 'GUI=ON')
-        with:
-          category: ${{ github.base_ref || github.ref_name }}
-
-      - name: Prepare build artifacts
-        run: |
-          mkdir upload
-          mkdir upload/cmake
-          cp build/compile_commands.json upload/cmake
-          mkdir upload/cmake/libtorrent
-          cp ${{ env.libtorrent_path }}/build/compile_commands.json upload/cmake/libtorrent
-
-      - name: Install AppImage
-        run: |
-          sudo apt install libfuse2
-          curl \
-            -L \
-            -Z \
-            -O https://github.com/linuxdeploy/linuxdeploy/releases/download/continuous/linuxdeploy-static-x86_64.AppImage \
-            -O https://github.com/linuxdeploy/linuxdeploy-plugin-qt/releases/download/continuous/linuxdeploy-plugin-qt-static-x86_64.AppImage \
-            -O https://github.com/linuxdeploy/linuxdeploy-plugin-appimage/releases/download/continuous/linuxdeploy-plugin-appimage-x86_64.AppImage
-          chmod +x \
-            linuxdeploy-static-x86_64.AppImage \
-            linuxdeploy-plugin-qt-static-x86_64.AppImage \
-            linuxdeploy-plugin-appimage-x86_64.AppImage
-
-      - name: Prepare files for AppImage
-        if: matrix.qbt_gui == 'GUI=OFF'
-        run: |
-          mkdir -p qbittorrent/usr/share/applications
-          cp .github/workflows/helper/appimage/org.qbittorrent.qBittorrent.desktop qbittorrent/usr/share/applications/org.qbittorrent.qBittorrent.desktop
-          mkdir -p qbittorrent/usr/share/icons/hicolor/scalable/apps
-          cp dist/unix/menuicons/scalable/apps/qbittorrent.svg qbittorrent/usr/share/icons/hicolor/scalable/apps/qbittorrent.svg
-
-      - name: Package AppImage
-        run: |
-          ./linuxdeploy-static-x86_64.AppImage --appdir qbittorrent --plugin qt
-          rm qbittorrent/apprun-hooks/*
-          cp .github/workflows/helper/appimage/export_vars.sh qbittorrent/apprun-hooks/export_vars.sh
-          NO_APPSTREAM=1 \
-            OUTPUT=upload/qbittorrent-CI_Ubuntu_x86_64.AppImage \
-            ./linuxdeploy-static-x86_64.AppImage --appdir qbittorrent --output appimage
-
-      - name: Upload build artifacts
-        uses: actions/upload-artifact@v4
-        with:
-          name: qBittorrent-CI_Ubuntu-x64_${{ matrix.qbt_gui }}_libtorrent-${{ matrix.libt_version }}_Qt-${{ matrix.qt_version }}
-          path: upload

.github/workflows/ci_webui.yaml

@@ -1,48 +0,0 @@
-name: CI - WebUI
-
-on: [pull_request, push]
-
-permissions:
-  security-events: write
-
-concurrency:
-  group: ${{ github.workflow }}-${{ github.head_ref || github.run_id }}
-  cancel-in-progress: ${{ github.head_ref != '' }}
-
-jobs:
-  ci:
-    name: Check
-    runs-on: ubuntu-latest
-
-    defaults:
-      run:
-        working-directory: src/webui/www
-
-    steps:
-      - name: Checkout repository
-        uses: actions/checkout@v4
-
-      - name: Setup nodejs
-        uses: actions/setup-node@v4
-        with:
-          node-version: 'lts/*'
-
-      - name: Install tools
-        run: npm install
-
-      - name: Lint code
-        run: npm run lint
-
-      - name: Format code
-        run: |
-          npm run format
-          git diff --exit-code
-
-      - name: Initialize CodeQL
-        uses: github/codeql-action/init@v3
-        with:
-          config-file: .github/workflows/helper/codeql/js.yaml
-          languages: javascript
-
-      - name: Run CodeQL analysis
-        uses: github/codeql-action/analyze@v3

.github/workflows/ci_windows.yaml

@@ -1,198 +0,0 @@
-name: CI - Windows
-
-on: [pull_request, push]
-
-permissions:
-  actions: write
-
-concurrency:
-  group: ${{ github.workflow }}-${{ github.head_ref || github.run_id }}
-  cancel-in-progress: ${{ github.head_ref != '' }}
-
-jobs:
-  ci:
-    name: Build
-    runs-on: windows-latest
-
-    strategy:
-      fail-fast: false
-      matrix:
-        libt_version: ["2.0.10", "1.2.19"]
-
-    env:
-      boost_path: "${{ github.workspace }}/../boost"
-      libtorrent_path: "${{ github.workspace }}/../libtorrent"
-      vcpkg_path: "c:/vcpkg"
-
-    steps:
-      - name: Checkout repository
-        uses: actions/checkout@v4
-
-      - name: Setup devcmd
-        uses: ilammy/msvc-dev-cmd@v1
-
-      - name: Install build tools
-        run: |
-          if ((Get-Command "ninja.exe" -ErrorAction SilentlyContinue) -eq $null)
-          {
-             choco install ninja
-          }
-          where.exe ninja
-          ninja --version
-
-      # https://learn.microsoft.com/en-us/vcpkg/users/binarycaching#gha
-      - name: Set variables for vcpkg
-        uses: actions/github-script@v7
-        with:
-          script: |
-            core.exportVariable('ACTIONS_CACHE_URL', (process.env.ACTIONS_CACHE_URL || ''));
-            core.exportVariable('ACTIONS_RUNTIME_TOKEN', (process.env.ACTIONS_RUNTIME_TOKEN || ''));
-
-      - name: Install dependencies with vcpkg
-        run: |
-          # create our own triplet
-          New-Item `
-            -Force `
-            -ItemType File `
-            -Path "${{ env.vcpkg_path }}/triplets_overlay/x64-windows-static-md-release.cmake"
-          # OpenSSL isn't compatible with `/guard:cf` flag so we omit it for now, see: https://github.com/openssl/openssl/issues/22554
-          Add-Content `
-            -Path "${{ env.vcpkg_path }}/triplets_overlay/x64-windows-static-md-release.cmake" `
-            -Value @("set(VCPKG_TARGET_ARCHITECTURE x64)",
-              "set(VCPKG_LIBRARY_LINKAGE static)",
-              "set(VCPKG_CRT_LINKAGE dynamic)",
-              "set(VCPKG_BUILD_TYPE release)")
-          # clear buildtrees after each package installation to reduce disk space requirements
-          $packages = `
-            "openssl:x64-windows-static-md-release",
-            "zlib:x64-windows-static-md-release"
-          ${{ env.vcpkg_path }}/vcpkg.exe upgrade `
-            --no-dry-run `
-            --overlay-triplets="${{ env.vcpkg_path }}/triplets_overlay"
-          ${{ env.vcpkg_path }}/vcpkg.exe install `
-            --binarysource="clear;x-gha,readwrite" `
-            --clean-after-build `
-            --overlay-triplets="${{ env.vcpkg_path }}/triplets_overlay" `
-            $packages
-
-      - name: Install boost
-        env:
-          BOOST_MAJOR_VERSION: "1"
-          BOOST_MINOR_VERSION: "85"
-          BOOST_PATCH_VERSION: "0"
-        run: |
-          $boost_url="https://boostorg.jfrog.io/artifactory/main/release/${{ env.BOOST_MAJOR_VERSION }}.${{ env.BOOST_MINOR_VERSION }}.${{ env.BOOST_PATCH_VERSION }}/source/boost_${{ env.BOOST_MAJOR_VERSION }}_${{ env.BOOST_MINOR_VERSION }}_${{ env.BOOST_PATCH_VERSION }}.tar.gz"
-          $boost_url2="https://sourceforge.net/projects/boost/files/boost/${{ env.BOOST_MAJOR_VERSION }}.${{ env.BOOST_MINOR_VERSION }}.${{ env.BOOST_PATCH_VERSION }}/boost_${{ env.BOOST_MAJOR_VERSION }}_${{ env.BOOST_MINOR_VERSION }}_${{ env.BOOST_PATCH_VERSION }}.tar.gz"
-          curl -L -o "${{ runner.temp }}/boost.tar.gz" "$boost_url"
-          tar -xf "${{ runner.temp }}/boost.tar.gz" -C "${{ github.workspace }}/.."
-          if ($LastExitCode -ne 0)
-          {
-            curl -L -o "${{ runner.temp }}/boost.tar.gz" "$boost_url2"
-            tar -xf "${{ runner.temp }}/boost.tar.gz" -C "${{ github.workspace }}/.."
-          }
-          move "${{ github.workspace }}/../boost_*" "${{ env.boost_path }}"
-
-      - name: Install Qt
-        uses: jurplel/install-qt-action@v4
-        with:
-          version: "6.7.3"
-          archives: qtbase qtsvg qttools
-          cache: true
-
-      - name: Install libtorrent
-        run: |
-          git clone `
-            --branch v${{ matrix.libt_version }} `
-            --depth 1 `
-            --recurse-submodules `
-            https://github.com/arvidn/libtorrent.git `
-            ${{ env.libtorrent_path }}
-          cd ${{ env.libtorrent_path }}
-          $env:CXXFLAGS+=" /guard:cf"
-          $env:LDFLAGS+=" /guard:cf"
-          cmake `
-            -B build `
-            -G "Ninja" `
-            -DCMAKE_BUILD_TYPE=RelWithDebInfo `
-            -DCMAKE_EXPORT_COMPILE_COMMANDS=ON `
-            -DCMAKE_INSTALL_PREFIX="${{ env.libtorrent_path }}/install" `
-            -DCMAKE_TOOLCHAIN_FILE="${{ env.vcpkg_path }}/scripts/buildsystems/vcpkg.cmake" `
-            -DBOOST_ROOT="${{ env.boost_path }}" `
-            -DBUILD_SHARED_LIBS=OFF `
-            -Ddeprecated-functions=OFF `
-            -Dstatic_runtime=OFF `
-            -DVCPKG_TARGET_TRIPLET=x64-windows-static-md-release
-          cmake --build build
-          cmake --install build
-
-      - name: Build qBittorrent
-        run: |
-          $env:CXXFLAGS+=" /WX"
-          cmake `
-            -B build `
-            -G "Ninja" `
-            -DCMAKE_BUILD_TYPE=RelWithDebInfo `
-            -DCMAKE_EXPORT_COMPILE_COMMANDS=ON `
-            -DCMAKE_TOOLCHAIN_FILE="${{ env.vcpkg_path }}/scripts/buildsystems/vcpkg.cmake" `
-            -DBOOST_ROOT="${{ env.boost_path }}" `
-            -DLibtorrentRasterbar_DIR="${{ env.libtorrent_path }}/install/lib/cmake/LibtorrentRasterbar" `
-            -DMSVC_RUNTIME_DYNAMIC=ON `
-            -DTESTING=ON `
-            -DVCPKG_TARGET_TRIPLET=x64-windows-static-md-release `
-            -DVERBOSE_CONFIGURE=ON `
-            --graphviz=build/target_graph.dot
-          cmake --build build --target qbt_update_translations
-          cmake --build build
-          cmake --build build --target check
-
-      - name: Prepare build artifacts
-        run: |
-          mkdir upload
-          mkdir upload/qBittorrent
-          copy build/qbittorrent.exe upload/qBittorrent
-          copy build/qbittorrent.pdb upload/qBittorrent
-          copy dist/windows/qt.conf upload/qBittorrent
-          # runtimes
-          copy "${{ env.Qt_ROOT_DIR }}/bin/Qt6Core.dll" upload/qBittorrent
-          copy "${{ env.Qt_ROOT_DIR }}/bin/Qt6Gui.dll" upload/qBittorrent
-          copy "${{ env.Qt_ROOT_DIR }}/bin/Qt6Network.dll" upload/qBittorrent
-          copy "${{ env.Qt_ROOT_DIR }}/bin/Qt6Sql.dll" upload/qBittorrent
-          copy "${{ env.Qt_ROOT_DIR }}/bin/Qt6Svg.dll" upload/qBittorrent
-          copy "${{ env.Qt_ROOT_DIR }}/bin/Qt6Widgets.dll" upload/qBittorrent
-          copy "${{ env.Qt_ROOT_DIR }}/bin/Qt6Xml.dll" upload/qBittorrent
-          mkdir upload/qBittorrent/plugins/iconengines
-          copy "${{ env.Qt_ROOT_DIR }}/plugins/iconengines/qsvgicon.dll" upload/qBittorrent/plugins/iconengines
-          mkdir upload/qBittorrent/plugins/imageformats
-          copy "${{ env.Qt_ROOT_DIR }}/plugins/imageformats/qico.dll" upload/qBittorrent/plugins/imageformats
-          copy "${{ env.Qt_ROOT_DIR }}/plugins/imageformats/qsvg.dll" upload/qBittorrent/plugins/imageformats
-          mkdir upload/qBittorrent/plugins/platforms
-          copy "${{ env.Qt_ROOT_DIR }}/plugins/platforms/qwindows.dll" upload/qBittorrent/plugins/platforms
-          mkdir upload/qBittorrent/plugins/sqldrivers
-          copy "${{ env.Qt_ROOT_DIR }}/plugins/sqldrivers/qsqlite.dll" upload/qBittorrent/plugins/sqldrivers
-          mkdir upload/qBittorrent/plugins/styles
-          copy "${{ env.Qt_ROOT_DIR }}/plugins/styles/qmodernwindowsstyle.dll" upload/qBittorrent/plugins/styles
-          mkdir upload/qBittorrent/plugins/tls
-          copy "${{ env.Qt_ROOT_DIR }}/plugins/tls/qschannelbackend.dll" upload/qBittorrent/plugins/tls
-          # cmake additionals
-          mkdir upload/cmake
-          copy build/compile_commands.json upload/cmake
-          copy build/target_graph.dot upload/cmake
-          mkdir upload/cmake/libtorrent
-          copy ${{ env.libtorrent_path }}/build/compile_commands.json upload/cmake/libtorrent
-
-      - name: Upload build artifacts
-        uses: actions/upload-artifact@v4
-        with:
-          name: qBittorrent-CI_Windows-x64_libtorrent-${{ matrix.libt_version }}
-          path: upload
-
-      - name: Create installer
-        run: |
-          7z x -o"dist/windows/" "dist/windows/NSISPlugins.zip"
-          makensis /DQBT_DIST_DIR="../../upload/qBittorrent" /WX dist/windows/qbittorrent.nsi
-
-      - name: Upload installer
-        uses: actions/upload-artifact@v4
-        with:
-          name: qBittorrent-CI_Windows-x64_libtorrent-${{ matrix.libt_version }}-setup
-          path: dist/windows/qbittorrent_*_setup.exe

.github/workflows/coverity-scan.yaml

@@ -1,115 +0,0 @@
-name: Coverity Scan
-
-on:
-  schedule:
-    - cron: '0 0 1 * *' # Monthly (1st day of month at midnight)
-  workflow_dispatch: # Mainly for testing. Don't forget the Coverity usage limits.
-
-permissions: {}
-
-jobs:
-  coverity_scan:
-    name: Scan
-    runs-on: ubuntu-latest
-
-    strategy:
-      matrix:
-        libt_version: ["2.0.10"]
-        qbt_gui: ["GUI=ON"]
-        qt_version: ["6.5.2"]
-
-    env:
-      boost_path: "${{ github.workspace }}/../boost"
-      coverity_path: "${{ github.workspace }}/../coverity"
-      libtorrent_path: "${{ github.workspace }}/../libtorrent"
-
-    steps:
-      - name: Checkout repository
-        uses: actions/checkout@v4
-
-      - name: Install dependencies
-        run: |
-          sudo apt update
-          sudo apt install \
-            build-essential cmake ninja-build \
-            libssl-dev libxkbcommon-x11-dev libxcb-cursor-dev zlib1g-dev
-
-      - name: Install boost
-        env:
-          BOOST_MAJOR_VERSION: "1"
-          BOOST_MINOR_VERSION: "85"
-          BOOST_PATCH_VERSION: "0"
-        run: |
-          boost_url="https://boostorg.jfrog.io/artifactory/main/release/${{ env.BOOST_MAJOR_VERSION }}.${{ env.BOOST_MINOR_VERSION }}.${{ env.BOOST_PATCH_VERSION }}/source/boost_${{ env.BOOST_MAJOR_VERSION }}_${{ env.BOOST_MINOR_VERSION }}_${{ env.BOOST_PATCH_VERSION }}.tar.gz"
-          boost_url2="https://sourceforge.net/projects/boost/files/boost/${{ env.BOOST_MAJOR_VERSION }}.${{ env.BOOST_MINOR_VERSION }}.${{ env.BOOST_PATCH_VERSION }}/boost_${{ env.BOOST_MAJOR_VERSION }}_${{ env.BOOST_MINOR_VERSION }}_${{ env.BOOST_PATCH_VERSION }}.tar.gz"
-          set +e
-          curl -L -o "${{ runner.temp }}/boost.tar.gz" "$boost_url"
-          tar -xf "${{ runner.temp }}/boost.tar.gz" -C "${{ github.workspace }}/.."; _exitCode="$?"
-          if [ "$_exitCode" -ne "0" ]; then
-            curl -L -o "${{ runner.temp }}/boost.tar.gz" "$boost_url2"
-            tar -xf "${{ runner.temp }}/boost.tar.gz" -C "${{ github.workspace }}/.."; _exitCode="$?"
-          fi
-          mv "${{ github.workspace }}/.."/boost_* "${{ env.boost_path }}"
-
-      - name: Install Qt
-        uses: jurplel/install-qt-action@v4
-        with:
-          version: ${{ matrix.qt_version }}
-          archives: icu qtbase qtdeclarative qtsvg qttools
-          cache: true
-
-      - name: Install libtorrent
-        run: |
-          git clone \
-            --branch v${{ matrix.libt_version }} \
-            --depth 1 \
-            --recurse-submodules \
-            https://github.com/arvidn/libtorrent.git \
-            ${{ env.libtorrent_path }}
-          cd ${{ env.libtorrent_path }}
-          cmake \
-            -B build \
-            -G "Ninja" \
-            -DCMAKE_BUILD_TYPE=RelWithDebInfo \
-            -DBOOST_ROOT="${{ env.boost_path }}" \
-            -Ddeprecated-functions=OFF
-          cmake --build build
-          sudo cmake --install build
-
-      - name: Download Coverity Build Tool
-        run: |
-          curl \
-            -L \
-            -d "token=${{ secrets.COVERITY_SCAN_TOKEN }}&project=qbittorrent%2FqBittorrent" \
-            -o "${{ runner.temp }}/coverity_tool.tgz" \
-            "https://scan.coverity.com/download/linux64"
-          mkdir -p ${{ env.coverity_path }}
-          tar \
-            -xf "${{ runner.temp }}/coverity_tool.tgz" \
-            -C "${{ env.coverity_path }}" \
-            --strip-components 1
-
-      - name: Build qBittorrent
-        run: |
-          cmake \
-            -B build \
-            -G "Ninja" \
-            -DCMAKE_BUILD_TYPE=RelWithDebInfo \
-            -DBOOST_ROOT="${{ env.boost_path }}" \
-            -DVERBOSE_CONFIGURE=ON \
-            -D${{ matrix.qbt_gui }}
-          PATH="${{ env.coverity_path }}/bin:$PATH" \
-          cov-build \
-            --dir cov-int \
-            cmake --build build
-
-      - name: Submit the result to Coverity Scan
-        run: |
-          tar -caf qbittorrent.xz cov-int
-          curl \
-            --form token="${{ secrets.COVERITY_SCAN_TOKEN }}" \
-            --form email=sledgehammer999@qbittorrent.org \
-            --form file=@qbittorrent.xz \
-            --form version="$(git rev-parse --short HEAD)" \
-            --form description="master" \
-            https://scan.coverity.com/builds?project=qbittorrent%2FqBittorrent

.github/workflows/helper/appimage/export_vars.sh

@@ -1,13 +0,0 @@
-#!/bin/sh
-
-# this file is called from AppRun so 'root_dir' will point to where AppRun is
-root_dir="$(readlink -f "$(dirname "$0")")"
-
-# Insert the default values because after the test we prepend our path
-# and it will create problems with DEs (eg KDE) that don't set the variable
-# and rely on the default paths
-if [ -z "${XDG_DATA_DIRS}" ]; then
-    XDG_DATA_DIRS="/usr/local/share/:/usr/share/"
-fi
-
-export XDG_DATA_DIRS="${root_dir}/usr/share:${XDG_DATA_DIRS}"

.github/workflows/helper/appimage/org.qbittorrent.qBittorrent.desktop

@@ -1,6 +0,0 @@
-[Desktop Entry]
-Name=qBittorrent
-Exec=qbittorrent-nox %U
-Icon=qbittorrent
-Type=Application
-Categories=Network

.github/workflows/helper/codeql/cpp.yaml

@@ -1,14 +0,0 @@
-name: "CodeQL config for C++"
-
-queries:
-  - uses: security-and-quality
-
-query-filters:
-  - exclude:
-      id: cpp/commented-out-code
-  - exclude:
-      id: cpp/include-non-header
-  - exclude:
-      id: cpp/loop-variable-changed
-  - exclude:
-      id: cpp/useless-expression

.github/workflows/helper/codeql/js.yaml

@@ -1,11 +0,0 @@
-name: "CodeQL config for Javascript"
-
-paths-ignore:
-  - "**/lib/*"
-
-queries:
-  - uses: security-and-quality
-
-query-filters:
-  - exclude:
-      id: js/superfluous-trailing-arguments

.github/workflows/helper/pre-commit/.typos.toml

@@ -1,18 +0,0 @@
-# https://github.com/crate-ci/typos/blob/master/docs/reference.md
-# https://github.com/crate-ci/typos/blob/master/docs/design.md#identifiers-and-words
-
-# try adding to `identifiers` list first, if doesn't work then `words` list
-
-[default.extend-identifiers]
-additionals = "additionals"
-caf = "caf"
-curren = "curren"
-FO = "FO"
-ket = "ket"
-Q_INVOKABLE = "Q_INVOKABLE"
-switchs = "switchs"
-ths = "ths"
-
-[default.extend-words]
-BA = "BA"
-helo = "helo"

.github/workflows/helper/pre-commit/check_translation_tag.py

@@ -1,70 +0,0 @@
-#!/usr/bin/env python3
-
-# A pre-commit hook for detecting problematic <translation> tags
-# Copyright (C) 2021  Mike Tzou (Chocobo1)
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# as published by the Free Software Foundation; either version 2
-# of the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
-#
-# In addition, as a special exception, the copyright holders give permission to
-# link this program with the OpenSSL project's "OpenSSL" library (or with
-# modified versions of it that use the same license as the "OpenSSL" library),
-# and distribute the linked executables. You must obey the GNU General Public
-# License in all respects for all of the code used other than "OpenSSL".  If you
-# modify file(s), you may extend this exception to your version of the file(s),
-# but you are not obligated to do so. If you do not wish to do so, delete this
-# exception statement from your version.
-
-from typing import Optional, Sequence
-import argparse
-import re
-
-
-def main(argv: Optional[Sequence[str]] = None) -> int:
-    parser = argparse.ArgumentParser()
-    parser.add_argument('filenames', nargs='*', help='Filenames to check')
-    args = parser.parse_args(argv)
-
-    error_msg = ""
-    regex = re.compile(r"\s*</translation>")
-
-    for filename in args.filenames:
-        line_counter = 1
-        error_buffer = ""
-
-        with open(filename) as file:
-            try:
-                for line in file:
-                    if (match := regex.match(line)) is not None:
-                        error_buffer += str(f"Defect file: \"{filename}\"\n"
-                                            f"Line: {line_counter}\n"
-                                            f"Column span: {match.span()}\n"
-                                            f"Part: \"{match.group()}\"\n\n")
-                    line_counter += 1
-
-            except UnicodeDecodeError:
-                # not a text file, skip
-                continue
-
-        error_msg += error_buffer
-
-    if len(error_msg) > 0:
-        print(error_msg)
-        return 1
-
-    return 0
-
-
-if __name__ == '__main__':
-    exit(main())

.github/workflows/stale_bot.yaml

@@ -1,25 +0,0 @@
-name: Stale bot
-
-on:
-  schedule:
-    - cron: '0 0 * * *'
-
-permissions:
-  pull-requests: write
-
-jobs:
-  stale:
-    runs-on: ubuntu-latest
-    steps:
-      - name: Mark and close stale PRs
-        uses: actions/stale@v9
-        with:
-          stale-pr-message: "This PR is stale because it has been 60 days with no activity. This PR will be automatically closed within 7 days if there is no further activity."
-          close-pr-message: "This PR was closed because it has been stalled for some time with no activity."
-          days-before-stale: -1 # avoid marking issues
-          days-before-pr-stale: 60
-          days-before-close: -1 # avoid closing issues
-          days-before-pr-close: 7
-          exempt-all-pr-assignees: true  # avoid stale for all PR with assignees
-          exempt-all-pr-milestones: true # avoid stale for all PR with milestones
-          operations-per-run: 200

.gitignore

@@ -1,12 +1,9 @@
-.vscode/
 src/gui/geoip/GeoIP.dat
 src/gui/geoip/GeoIP.dat.gz
 src/qbittorrent
 src/qbittorrent-nox
 src/release
 src/debug
-src/base/version.h
-CMakeLists.txt.user*
 qbittorrent.pro.user*
 conf.pri
 Makefile*
@@ -17,7 +14,6 @@ Makefile*
 *.o
 *.pdb
 *.exe
-*.dll
 
 # Generated MOC, resource and UI files
 moc_*.cpp
@@ -25,7 +21,7 @@ moc_*.h
 qrc_*.cpp
 ui_*.h
 *.moc
-*.qm
+src/lang/qbittorrent_*.qm
 .DS_Store
 .qmake.stash
 src/qbittorrent.app
@@ -38,10 +34,3 @@ config.status
 src/icons/qbt-theme/build-icons/node_modules/
 src/icons/skin/build-icons/node_modules/
 src/icons/skin/build-icons/icons/*.png
-
-# CMake build directory
-build/
-
-# Web UI tools
-node_modules
-package-lock.json

.pre-commit-config.yaml

@@ -1,109 +0,0 @@
-repos:
-  - repo: local
-    hooks:
-      - id: check-translation-tag
-        name: Check newline characters in <translation> tag
-        entry: .github/workflows/helper/pre-commit/check_translation_tag.py
-        language: script
-        exclude: |
-          (?x)^(
-            src/lang/.*
-          )$
-        types_or:
-          - ts
-
-  - repo: https://github.com/pre-commit/pre-commit-hooks.git
-    rev: v4.5.0
-    hooks:
-    - id: check-json
-      name: Check JSON files
-
-    - id: check-yaml
-      name: Check YAML files
-
-    - id: fix-byte-order-marker
-      name: Check file encoding (UTF-8 without BOM)
-      exclude: |
-        (?x)^(
-          src/base/unicodestrings.h
-        )$
-
-    - id: mixed-line-ending
-      name: Check line ending character (LF)
-      args: ["--fix=lf"]
-      exclude: |
-        (?x)^(
-          src/webui/www/private/css/lib/.* |
-          src/webui/www/private/scripts/lib/.* |
-          dist/windows/license.txt |
-          test/testdata/crlf.txt
-        )$
-
-    - id: end-of-file-fixer
-      name: Check trailing newlines
-      exclude: |
-        (?x)^(
-          configure |
-          src/webui/www/private/css/lib/.* |
-          src/webui/www/private/scripts/lib/.* |
-          test/testdata/crlf.txt
-        )$
-      exclude_types:
-        - svg
-        - ts
-
-    - id: trailing-whitespace
-      name: Check trailing whitespaces
-      exclude: |
-        (?x)^(
-          src/webui/www/private/css/lib/.* |
-          src/webui/www/private/scripts/lib/.*
-        )$
-      exclude_types:
-        - ts
-
-  - repo: https://github.com/codespell-project/codespell.git
-    rev: v2.2.6
-    hooks:
-    - id: codespell
-      name: Check spelling (codespell)
-      args: ["--ignore-words-list", "additionals,curren,fo,ist,ket,searchin,superseeding,te,ths"]
-      exclude: |
-        (?x)^(
-          .*\.desktop |
-          .*\.qrc |
-          build-aux/.* |
-          Changelog |
-          dist/windows/installer-translations/.* |
-          m4/.* |
-          src/base/3rdparty/.* |
-          src/searchengine/nova3/socks.py |
-          src/webui/www/private/scripts/lib/.*
-        )$
-      exclude_types:
-        - ts
-
-  - repo: https://github.com/crate-ci/typos.git
-    rev: v1.16.18
-    hooks:
-    - id: typos
-      name: Check spelling (typos)
-      args: ["--config", ".github/workflows/helper/pre-commit/.typos.toml"]
-      exclude: |
-        (?x)^(
-          .*\.asc |
-          .*\.desktop |
-          .*\.qrc |
-          \.pre-commit-config\.yaml |
-          build-aux/.* |
-          Changelog |
-          configure.* |
-          dist/windows/installer-translations/.* |
-          m4/.* |
-          src/base/3rdparty/.* |
-          src/searchengine/nova3/socks.py |
-          src/webui/www/private/scripts/lib/.*
-        )$
-      exclude_types:
-        - svg
-        - ts

.travis.yml

@@ -0,0 +1,196 @@
+language: cpp
+
+os:
+  - linux
+  - osx
+osx_image: xcode7.3
+
+env:
+  matrix:
+    # Uncomment when Travis upgraded "Ubuntu 12.04 LTS" to a newer version whose repo will have a more up-to-date libtorrent package
+    #- lt_branch=dist gui=true
+    #- lt_branch=dist gui=false
+    - lt_branch=RC_1_0 gui=true build_system=cmake
+    - lt_branch=RC_1_0 gui=false build_system=cmake
+    - lt_branch=RC_1_0 gui=true build_system=qmake
+    - lt_branch=RC_1_0 gui=false build_system=qmake
+  global:
+    - secure: "OI9CUjj4lTb0HwwIZU5PbECU3hLlAL6KC8KsbwohG8/O3j5fLcnmDsK4Ad9us5cC39sS11Jcd1kDP2qRcCuST/glVNhLkcjKkiQerOfd5nQ/qL4JYfz/1mfP5mdpz9jHKzpLUIG+TXkbSTjP6VVmsb5KPT+3pKEdRFZB+Pu9+J8="
+    - coverity_branch: coverity_scan
+
+matrix:
+  allow_failures:
+    - env: lt_branch=RC_1_0 gui=true build_system=cmake
+    - env: lt_branch=RC_1_0 gui=false build_system=cmake
+
+branches:
+  except:
+    - search_encoding_windows
+    - v2_9_x
+
+notifications:
+  email:
+    on_success: change
+    on_failure: change
+
+cache:
+  ccache: true
+  directories:
+    - $HOME/hombebrew_cache
+
+# opt-in Ubuntu Trusty
+dist: trusty
+# container-based builds
+sudo: false
+
+addons:
+  coverity_scan:
+    project:
+      name: "qbittorrent/qBittorrent"
+      description: "Build submitted via Travis CI"
+    build_command_prepend: "./bootstrap.sh && ./configure $qbtconf"
+    build_command: make
+    branch_pattern: $coverity_branch
+    notification_email: sledgehammer999@qbittorrent.org
+  apt:
+    sources:
+      # sources list: https://github.com/travis-ci/apt-source-whitelist/blob/master/ubuntu.json
+      - ubuntu-toolchain-r-test
+      #- boost-latest
+      - sourceline: 'ppa:qbittorrent-team/qbittorrent-stable'
+      - sourceline: 'ppa:beineri/opt-qt551-trusty'
+      - sourceline: 'ppa:adrozdoff/cmake'
+    packages:
+      # packages list: https://github.com/travis-ci/apt-package-whitelist/blob/master/ubuntu-precise
+      - [autoconf, automake, colormake]
+      - [cmake, ninja-build]
+      - libssl-dev
+      - [libboost-dev, libboost-system-dev]
+      - libtorrent-rasterbar-dev
+      - [qt55base, qt55svg, qt55tools]
+      - [gcc-6, g++-6]
+
+before_install:
+  # only allow specific build for coverity scan, others will stop
+  - if [ "$TRAVIS_BRANCH" = "$coverity_branch" ] && ! [ "$TRAVIS_OS_NAME" = "linux" -a "$lt_branch" = "RC_1_0" -a "$gui" = true -a "$build_system" = "qmake" ]; then exit ; fi
+
+  - shopt -s expand_aliases
+  - alias make="colormake -j3" # Using nprocs/2 sometimes may fail (gcc is killed by system)
+  #- libt_path="$HOME/libt_install"
+  #- ltconf="$ltconf --prefix="$libt_path" --disable-geoip"
+  - qbt_path="$HOME/qbt_install"
+  - qbtconf="$qbtconf --prefix="$qbt_path" PKG_CONFIG_PATH="$libt_path/lib/pkgconfig":/opt/qt55/lib/pkgconfig:$PKG_CONFIG_PATH"
+
+  # options for specific branches
+  - if [ "$gui" = false ]; then qbtconf="$qbtconf --disable-gui" ; fi
+  - |
+    if [ "$TRAVIS_OS_NAME" = "linux" ]; then
+      # setup virtual display for after_success target
+      if [ "$gui" = true ]; then export "DISPLAY=:99.0" && /sbin/start-stop-daemon --start --quiet --pidfile /tmp/custom_xvfb_99.pid --make-pidfile --background --exec /usr/bin/Xvfb -- :99 -ac -screen 0 1280x1024x16 ; fi ;
+
+      # Qt 5
+      PATH=/opt/qt55/bin:${PATH}
+
+      if [ "$build_system" = "cmake" ]; then
+          COMPILER_VERSION=6
+          export CXX="${CXX}-${COMPILER_VERSION}" CC="${CC}-${COMPILER_VERSION}"
+      fi
+    fi
+
+  # print settings
+  - echo $lt_branch
+  - echo $gui
+  - echo $build_system
+  - echo $ltconf
+  - echo $qbtconf
+
+install:
+  #- |
+    #if [ "$TRAVIS_OS_NAME" = "linux" ]; then
+      # build libtorrent from source
+      #if [ "$lt_branch" != "dist" ]; then
+        #cd "$HOME" && pwd && git clone --depth 1 https://github.com/arvidn/libtorrent.git --branch $lt_branch
+        #cd libtorrent && ./autotool.sh && ./configure $ltconf && make install
+      #fi
+    #fi
+  - |
+    if [ "$TRAVIS_OS_NAME" = "osx" ]; then
+      # dependencies
+      brew update > /dev/null
+      brew outdated "pkg-config" || brew upgrade "pkg-config"
+      brew install colormake ccache zlib qt
+      PATH="/usr/local/opt/ccache/libexec:$PATH"
+      brew link --force zlib qt
+
+      wget https://builds.shiki.hu/homebrew/version
+      if ! cmp --quiet "version" "$HOME/hombebrew_cache/version" ; then
+        echo "Cached files are different from server. Downloading new ones."
+        # First delete old files
+        rm -r "$HOME/hombebrew_cache"
+        mkdir "$HOME/hombebrew_cache"
+        cp "version" $HOME/hombebrew_cache
+        cd "$HOME/hombebrew_cache"
+        wget https://builds.shiki.hu/homebrew/libtorrent-rasterbar.rb
+        wget https://builds.shiki.hu/homebrew/libtorrent-rasterbar-1.0.11+git20170910.6d5625e0ea.el_capitan.bottle.tar.gz
+      fi
+
+      # Copy custom libtorrent bottle to homebrew's cache so it can find and install it
+      # Also install our custom libtorrent formula by passing the local path to it
+      # These 2 files are restored from Travis' cache.
+      cp "$HOME/hombebrew_cache/libtorrent-rasterbar-1.0.11+git20170910.6d5625e0ea.el_capitan.bottle.tar.gz" "$(brew --cache)"
+      brew install "$HOME/hombebrew_cache/libtorrent-rasterbar.rb"
+
+      if [ "$build_system" = "cmake" ]; then
+        brew outdated cmake || brew upgrade cmake
+        brew install ninja
+
+        ln -s /usr/local/opt/qt/mkspecs /usr/local/mkspecs
+        ln -s /usr/local/opt/qt/plugins /usr/local/plugins
+      fi
+
+      MY_CMAKE_OPENSSL_HINT="-DOPENSSL_ROOT_DIR=/usr/local/opt/openssl/"
+    fi
+  - |
+    if [ "$TRAVIS_BRANCH" != "$coverity_branch" ]; then
+      export use_ccache=true
+      ccache -V && ccache --show-stats && ccache --zero-stats
+    fi
+
+script:
+  - if [ "$TRAVIS_BRANCH" = "$coverity_branch" ]; then exit ; fi # skip usual build when running coverity scan
+  - |
+    cd "$TRAVIS_BUILD_DIR"
+    if [ "$build_system" = "cmake" ]; then
+      mkdir build
+      cd build
+      cmake -DGUI=${gui} -DCMAKE_INSTALL_PREFIX="$qbt_path" "$MY_CMAKE_OPENSSL_HINT" \
+        -G "Ninja" -DCMAKE_INSTALL_RPATH_USE_LINK_PATH=TRUE ..
+      BUILD_TOOL="ninja"
+    fi
+    if [ "$build_system" = "qmake" ]; then
+      ./bootstrap.sh && ./configure $qbtconf
+      if [ "$TRAVIS_OS_NAME" = "osx" ]; then
+        sed -i "" -e "s/^\(CC.*&&\).*$/\1 $CC/" src/Makefile  # workaround for Qt & ccache: https://bugreports.qt.io/browse/QTBUG-31034
+        sed -i "" -e "s/^\(CXX.*&&\).*$/\1 $CXX/" src/Makefile
+        sed -i "" -e 's/^\(CXXFLAGS.*\)$/\1 -Wno-unused-local-typedefs -Wno-inconsistent-missing-override/' src/Makefile
+      fi
+      BUILD_TOOL="make"
+    fi
+  - $BUILD_TOOL && $BUILD_TOOL install
+
+after_success:
+  - if [ "$gui" = true ]; then qbt_exe="qbittorrent" ; else qbt_exe="qbittorrent-nox" ; fi
+  - if [ "$TRAVIS_OS_NAME" = "linux" ]; then cd "$qbt_path/bin" ; fi
+  - |
+    if [ "$TRAVIS_OS_NAME" = "osx" ]; then
+      if [ "$build_system" = "qmake" ]; then
+        macdeployqt "$TRAVIS_BUILD_DIR/src/$qbt_exe.app"
+        cd "$TRAVIS_BUILD_DIR/src/$qbt_exe.app/Contents/MacOS"
+      else
+        cd "$qbt_path/$qbt_exe.app/Contents/MacOS"
+      fi
+    fi
+  - ./$qbt_exe --version
+
+after_script:
+  - if [ "$use_ccache" = true ]; then ccache --show-stats ; fi

.tx/config

@@ -1,24 +1,19 @@
 [main]
 host = https://www.transifex.com
 
-[o:sledgehammer999:p:qbittorrent:r:qbittorrent_v50x]
-file_filter  = src/lang/qbittorrent_<lang>.ts
-source_file  = src/lang/qbittorrent_en.ts
-source_lang  = en
-type         = QT
+[qbittorrent.qbittorrent_master]
+file_filter = src/lang/qbittorrent_<lang>.ts
+lang_map = pt: pt_PT
+source_file = src/lang/qbittorrent_en.ts
+source_lang = en
+type = QT
 minimum_perc = 23
-lang_map     = pt: pt_PT, zh: zh_CN
+mode = developer
 
-[o:sledgehammer999:p:qbittorrent:r:qbittorrent_webui_v50x]
-file_filter  = src/webui/www/translations/webui_<lang>.ts
-source_file  = src/webui/www/translations/webui_en.ts
-source_lang  = en
-type         = QT
-minimum_perc = 23
-lang_map     = pt: pt_PT, zh: zh_CN
 
-[o:sledgehammer999:p:qbittorrent:r:qbittorrentdesktop_master]
-source_file  = dist/unix/org.qbittorrent.qBittorrent.desktop
-source_lang  = en
-type         = DESKTOP
+[qbittorrent.qbittorrentdesktop_master]
+source_file = src/icons/qBittorrent.desktop
+source_lang = en
+type = DESKTOP
 minimum_perc = 23
+mode = developer

AUTHORS

@@ -17,78 +17,81 @@ Contributors:
 * Nick Tiskov <daymansmail@gmail.com>
 
 Code from other projects:
-* files src/app/qtlocalpeer/*
+* files src/qtsingleapplication/* src/lineedit/*
   copyright: Nokia Corporation
-  license: mixed
+  license: LGPL
 
-* files src/gui/lineedit.*
-  copyright: Trolltech ASA <info@trolltech.com>
-  license: custom
+* files src/ico.cpp src/ico.h
+  copyright: Malte Starostik <malte@kde.org>
+  license: LGPL
 
 * files src/search_engine/socks.py
   copyright: Dan Haim <negativeiq@users.sourceforge.net>
   license: BSD
 
-* files src/webui/www/private/css/lib/vanillaSelectBox.css src/webui/www/private/scripts/lib/vanillaSelectBox.js
-  copyright: Philippe Meyer <pmg.meyer@gmail.com>
-  license: MIT
+* file src/stacktrace_win.h
+  copyright: Quassel Project
+  license: GPLv2/3
 
 Images Authors:
-* files: src/icons/qbittorrent-tray.svg
+* files: src/icons/skin/qbittorrent-tray.svg (and related pngs)
   copyright: Provided by HVS <hvs linuxmail org> (raster first proposal) and Atif Afzal(@atfzl github) <atif5801@gmail.com> (vectorized and modified)
   license: GPLv2+
 
 * files: src/qbittorrent_file.ico src/icons/fileicon.svg
-  copyright: 'unknown.svg' (LGPLv3+) from Oxygen Icon Theme was used as base which was slightly modified and 'qbittorrent-tray.svg' (GPLv2+) was overlaid above it.
+  copyright: 'uknown.svg' (LGPLv3+) from Oxygen Icon Theme was used as base which was slightly modified and 'qbittorrent-tray.svg' (GPLv2+) was overlayed above it.
   license: GPLv3+
 
-* files: src/icons/flags/*.svg
-  copyright: lipis/flag-icons
-  license: MIT
-  url: https://github.com/lipis/flag-icons/
+* files: src/icons/*.png
+  copyright: Gnome Icon Theme
+  license: GPLv2
+  url: http://ftp.acc.umu.se/pub/GNOME/sources/gnome-icon-theme
 
-* file: src/webui/www/private/images/tabs.gif
+* files: src/oxygen/*.png
+  copyright: Oxygen Icon Theme (KDE)
+  license: LGPL
+  url: http://www.oxygen-icons.org
+
+* files: src/icons/flags/*.svg
+  copyright: lipis/flag-icon-css
+  license: MIT
+  url: https://github.com/lipis/flag-icon-css/
+
+* files: src/icons/skin/*.png
+  files: src/menuicons/YYxYY/*.png
+  copyright: Mateusz Tobola <tobejodok@qbittorrent.org>
+  license: GPLv2
+
+* file: src/icons/skin/tabs.gif
   copyright: Greg Houston <gregory.houston@gmail.com>
   license: MIT
 
-* file: src/icons/qbittorrent-tray-dark.svg src/icons/qbittorrent-tray-light.svg
+* file: src/icons/skin/qbittorrent_mono*
   copyright: Daniel Eguren <deguren@gmail.com>
-  modified by: now-im <now-im.d8gcu@simplelogin.com> (@now-im)
   license: LGPL
 
-* folder: src/icons/
-  files: application-rss+xml.svg, application-x-mswinurl.svg, connected.svg, disconnected.svg, checked-completed.svg, configure.svg,
-         edit-copy.svg, edit-rename.svg, folder-documents.svg, folder-new.svg, folder-remote.svg, go-bottom.svg, go-down.svg, go-top.svg,
-         go-up.svg, hash.svg, inode-directory.svg, insert-link.svg, kt-magnet.svg, media-playback-pause.svg, media-playback-start.svg,
-         media-seek-forward.svg, network-connect.svg, object-locked.svg, queued.svg, ratio.svg, reannounce.svg, slow_off.svg, slow.svg,
-         speedometer.svg, system-log-out.svg, tags.svg, task-complete.svg, task-reject.svg, tracker-error.svg, tracker-warning.svg,
-         trackerless.svg, trackers.svg, view-categories.svg
-  copyright: now-im <now-im.d8gcu@simplelogin.com> (@now-im) modified from La-Capitaine icon theme (https://github.com/keeferrourke/la-capitaine-icon-theme)
-  license: GPLv3+
+* file: src/search_engine/engines/btjunkie.png
+  copyright: Downloaded from btjunkie.org
 
-* folder: src/icons/
-  files: application-exit.svg, collapse.svg, dialog-warning.svg, edit-find-user.svg, edit-find.svg, filter-all.svg, firewalled.svg,
-         help-about.svg, help-contents.svg, ip-blocked.svg, list-remove.svg, loading.svg, mail-folder-inbox.svg, name.svg, network-server.svg,
-         office-chart-line.svg, plugins.svg, preferences-desktop.svg, preferences-other.svg, preferences-system-network.svg, security-high.svg,
-         security-low.svg, set-location.svg, torrent-creator.svg, user-group-delete.svg, user-group-new.svg, view-preview.svg, view-refresh.svg,
-         view-statistics.svg, wallet-open.svg, webuiapplication-exit.svg, collapse.svg, dialog-warning.svg, edit-find-user.svg, edit-find.svg,
-         filter-all.svg, firewalled.svg, help-about.svg, help-contents.svg, ip-blocked.svg, list-remove.svg, loading.svg, mail-folder-inbox.svg,
-         name.svg, network-server.svg, office-chart-line.svg, plugins.svg, preferences-desktop.svg, preferences-other.svg,
-         preferences-system-network.svg, security-high.svg, security-low.svg, set-location.svg, torrent-creator.svg, user-group-delete.svg,
-         user-group-new.svg, view-preview.svg, view-refresh.svg, view-statistics.svg, wallet-open.svg, webui.svg
-  copyright: now-im <now-im.d8gcu@simplelogin.com> (@now-im) modified from Ionicons icon theme (https://github.com/ionic-team/ionicons)
-  license: MIT
+* file: src/search_engine/engines/isohunt.png
+  copyright: Downloaded from isohunt.com
 
-* folder: src/icons/
-  files: force-recheck.svg
-  copyright: now-im <now-im.d8gcu@simplelogin.com> (@now-im) modified from Font-Awesome icon theme (https://github.com/FortAwesome/Font-Awesome)
-  license: CC BY 4.0 License
+* file: src/search_engine/engines/mininova.png
+  copyright: Downloaded from mininova.org
 
-* folder: src/icons/
-  files: downloading.svg, edit-clear.svg, error.svg, filter-active.svg, filter-inactive.svg, filter-stalled.svg, kt-set-max-download-speed.svg,
-         kt-set-max-upload-speed.svg, list-add.svg, preferences-web-browser-cookies.svg, stalledDL.svg, stalledUP.svg
-  copyright: now-im <now-im.d8gcu@simplelogin.com> (@now-im)
-  license: BSD 2-Clause License
+* file: src/search_engine/engines/piratebay.png
+  copyright: Downloaded from thepiratebay.org
+
+* file: src/search_engine/engines/torrentreactor.png
+  copyright: Downloaded from torrentreactor.net
+
+* file: src/icons/oxygen/checked.png
+  copyright: Victor Buinsky <allok.victor@gmail.com>
+  
+* file: src/icons/skin/ratio.png
+  copyright: Fatcow Web Hosting
+  license: Creative Commons Attribution 3.0 License
+  url: http://www.fatcow.com/free-icons
 
 Translations authors:
 * files: src/lang/*.ts
@@ -116,7 +119,7 @@ Translations authors:
   - German: Niels Hoffmann (zentralmaschine@users.sourceforge.net)
   - Greek: Tsvetan Bankov (emerge_life@users.sourceforge.net), Stephanos Antaris (santaris@csd.auth.gr), sledgehammer999(hammered999@gmail.com) and Γιάννης Ανθυμίδης Evropi(Transifex)
   - Hebrew: David Deutsch (d.deffo@gmail.com)
-  - Hungarian: Majoros Péter
+  - Hungarian: Majoros Péter (majoros.j.p@t-online.hu)
   - Italian: bovirus (bovirus@live.it) and Matteo Sechi (bu17714@gmail.com)
   - Japanese: Masato Hashimoto (cabezon.hashimoto@gmail.com)
   - Korean: Jin Woo Sin (jin828sin@users.sourceforge.net)

CMakeLists.txt

@@ -1,67 +1,56 @@
-cmake_minimum_required(VERSION 3.16 FATAL_ERROR) # Policies <= CMP0097 default to NEW
-
-project(qBittorrent
-    DESCRIPTION "The qBittorrent BitTorrent client"
-    HOMEPAGE_URL "https://www.qbittorrent.org/"
-    LANGUAGES CXX
-)
-
-# version requirements - older versions may work, but you are on your own
-set(minBoostVersion 1.76)
-set(minQt6Version 6.5.0)
-set(minOpenSSLVersion 3.0.2)
-set(minLibtorrent1Version 1.2.19)
-set(minLibtorrentVersion 2.0.10)
-set(minZlibVersion 1.2.11)
-
-include(GNUInstallDirs)
+cmake_minimum_required(VERSION 3.5)
+cmake_policy(VERSION 3.5)
 
 list(APPEND CMAKE_MODULE_PATH ${CMAKE_CURRENT_SOURCE_DIR}/cmake/Modules)
-include(FeatureSummary)
-include(FeatureOptionsSetup)
+include(FunctionReadVersion)
 
-# features, list is loosely sorted by user's interests
-feature_option(GUI "Build GUI application" ON)
-feature_option(WEBUI "Enable built-in HTTP server for remote control" ON)
-feature_option(STACKTRACE "Enable stacktrace support" ON)
-feature_option(TESTING "Build internal testing suite" OFF)
-feature_option(VERBOSE_CONFIGURE "Show information about PACKAGES_FOUND and PACKAGES_NOT_FOUND in the configure output (only useful for debugging the CMake build scripts)" OFF)
+read_version("${CMAKE_CURRENT_SOURCE_DIR}/version.pri" VER_MAJOR VER_MINOR VER_BUGFIX VER_BUILD VER_STATUS)
+# message(STATUS "Project version is: ${VER_MAJOR}.${VER_MINOR}.${VER_BUGFIX}.${VER_BUILD} (${VER_STATUS})")
 
-if (CMAKE_SYSTEM_NAME STREQUAL "Linux" OR CMAKE_SYSTEM_NAME STREQUAL "FreeBSD")
-    feature_option_dependent(DBUS
-        "Enable support for notifications and power-management features via D-Bus"
-        ON "GUI" OFF
-    )
+project(qBittorrent VERSION ${VER_MAJOR}.${VER_MINOR}.${VER_BUGFIX}.${VER_BUILD})
+
+set(PROJECT_VERSION "${VER_MAJOR}.${VER_MINOR}.${VER_BUGFIX}")
+
+if (NOT VER_BUILD EQUAL 0)
+    set(PROJECT_VERSION "${PROJECT_VERSION}.${VER_BUILD}")
 endif()
 
-if (CMAKE_SYSTEM_NAME STREQUAL "Linux")
-    feature_option_dependent(SYSTEMD
-        "Install systemd service file. Target directory is overridable with `SYSTEMD_SERVICES_INSTALL_DIR` variable"
-        OFF "NOT GUI" OFF
-    )
-endif()
+set(PROJECT_VERSION "${PROJECT_VERSION}${VER_STATUS}")
 
-if (MSVC)
-    feature_option(MSVC_RUNTIME_DYNAMIC "Use MSVC dynamic runtime library (-MD) instead of static (-MT)" ON)
-endif()
+add_definitions(-DQBT_VERSION_MAJOR=${VER_MAJOR})
+add_definitions(-DQBT_VERSION_MINOR=${VER_MINOR})
+add_definitions(-DQBT_VERSION_BUGFIX=${VER_BUGFIX})
+add_definitions(-DQBT_VERSION_BUILD=${VER_BUILD})
 
-if (VERBOSE_CONFIGURE)
-    feature_summary(WHAT ALL)
-else()
-    feature_summary(WHAT ENABLED_FEATURES DISABLED_FEATURES)
-endif()
+add_definitions(-DQBT_VERSION="v${PROJECT_VERSION}")
+add_definitions(-DQBT_VERSION_2="${PROJECT_VERSION}")
 
-# go check the packages
-include(CheckPackages)
-# configure for specific platform
-include(CommonConfig)
+if (UNIX AND NOT APPLE)
+    include(GNUInstallDirs)
+endif (UNIX AND NOT APPLE)
+
+if(WIN32)
+    include(winconf)
+endif(WIN32)
+
+# we need options here, because they are used not only in "src" subdir, but in the "dist" dir too
+include(CMakeDependentOption)
+
+option(SYSTEM_QTSINGLEAPPLICATION
+    "Use the system qtsingleapplication library or shipped one otherwise")
+
+option(GUI "Allows to disable GUI for headless running. Disables QtDBus and the GeoIP Database" ON)
+
+option(WEBUI "Allows to disable the WebUI." ON)
+
+if (WIN32)
+    option(STACKTRACE_WIN "")
+else (WIN32)
+    cmake_dependent_option(SYSTEMD "Install the systemd service file (headless only)" OFF
+        "NOT GUI" OFF)
+    cmake_dependent_option(DBUS "Enable use of QtDBus (GUI only)" ON "GUI" OFF)
+endif(WIN32)
 
-# Generate version header
-configure_file("src/base/version.h.in" "${CMAKE_CURRENT_SOURCE_DIR}/src/base/version.h" @ONLY)
 
 add_subdirectory(src)
 add_subdirectory(dist)
-
-if (TESTING)
-    add_subdirectory(test)
-endif()

CODING_GUIDELINES.md

@@ -1,44 +1,11 @@
-# Coding Guidelines
-
-All new code **must** follow the following coding guidelines.
-
-If you make changes in a file that still uses another coding style, make sure that you follow these guidelines for your changes. \
-For programming languages other than C++ (e.g. JavaScript) used in this repository and submodules, unless otherwise specified, coding guidelines listed here applies as much as possible.
-
-**Note 1:** I will not take your head if you forget and use another style. However, most probably the request will be delayed until you fix your coding style. \
-**Note 2:** You can use the `uncrustify` program/tool to clean up any source file. Use it with the `uncrustify.cfg` configuration file found in the root folder. \
-**Note 3:** There is also a style for QtCreator but it doesn't cover all cases. In QtCreator `Tools->Options...->C++->Code Style->Import...` and choose the `codingStyleQtCreator.xml` file found in the root folder.
-
-## Table Of Contents
-
-* [1. New lines & curly braces](#1-new-lines--curly-braces)
-  * [a. Function blocks, class/struct definitions, namespaces](#a-function-blocks-classstruct-definitions-namespaces)
-  * [b. Other code blocks](#b-other-code-blocks)
-  * [c. Blocks in switch's case labels](#c-blocks-in-switchs-case-labels)
-  * [d. If-else statements](#d-if-else-statements)
-  * [e. Single statement if blocks](#e-single-statement-if-blocks)
-  * [f. Acceptable conditions to omit braces](#f-acceptable-conditions-to-omit-braces)
-  * [g. Brace enclosed initializers](#g-brace-enclosed-initializers)
-* [2. Indentation](#2-indentation)
-* [3. File encoding and line endings](#3-file-encoding-and-line-endings)
-* [4. Initialization lists](#4-initialization-lists)
-* [5. Enums](#5-enums)
-* [6. Names](#6-names)
-  * [a. Type names and namespaces](#a-type-names-and-namespaces)
-  * [b. Variable names](#b-variable-names)
-  * [c. Private member variable names](#c-private-member-variable-names)
-* [7. Header inclusion order](#7-header-inclusion-order)
-* [8. Include guard](#8-include-guard)
-* [9. Misc](#9-misc)
-* [10. Git commit message](#10-git-commit-message)
-* [11. Not covered above](#11-not-covered-above)
-
----
-
-## 1. New lines & curly braces
-
-### a. Function blocks, class/struct definitions, namespaces
+All new code must follow the following coding guidelines.  
+If you make changes in a file that still uses another coding style, make sure that you follow these guidelines for your changes instead.  
+**Note 1:** I will not take your head if you forget and use another style. However, most probably the request will be delayed until you fix your coding style.  
+**Note 2:** You can use the `uncrustify` program/tool to clean up any source file. Use it with the `uncrustify.cfg` configuration file found in the root folder.  
+**Note 3:** There is also a style for QtCreator but it doesn't cover all cases. In QtCreator `Tools->Options...->C++->Code Style->Import...` and choose the `codingStyleQtCreator.xml` file found in the root folder.  
 
+### 1. Curly braces ###
+#### a. Function blocks, class/struct definitions, namespaces ####
 ```c++
 int myFunction(int a)
 {
@@ -48,7 +15,7 @@ int myFunction(int a)
 void myFunction() {} // empty body
 
 MyClass::MyClass(int *parent)
-    : m_parent {parent}
+    : m_parent(parent)
 {
     // initialize
 }
@@ -84,21 +51,17 @@ namespace Name
 }
 ```
 
-### b. Other code blocks
-
+#### b. Other code blocks ####
 ```c++
-if (condition)
-{
+if (condition) {
     // code
 }
 
-for (int a = 0; a < b; ++b)
-{
+for (int a = 0; a < b; ++b) {
     // code
 }
 
-switch (a)
-{
+switch (a) {
 case 1:
     // blah
 case 2:
@@ -106,25 +69,17 @@ case 2:
 default:
     // blah
 }
-
-{
-    // code
-}
 ```
 
-### c. Blocks in switch's case labels
-
+#### c. Blocks in switch's case labels ####
 ```c++
-switch (var)
-{
-case 1:
-    {
+switch (var) {
+case 1: {
         // declare local variables
         // code
     }
     break;
-case 2:
-    {
+case 2: {
         // declare local variables
         // code
     }
@@ -134,86 +89,9 @@ default:
 }
 ```
 
-### d. If-else statements
-
-The `else if`/`else` must be on their own lines:
-
-```c++
-if (condition)
-{
-    // code
-}
-else if (condition)
-{
-    // code
-}
-else
-{
-    // code
-}
-```
-
-### e. Single statement if blocks
-
-Most single statement if blocks should look like this:
-
-```c++
-if (condition)
-    a = a + b;
-```
-
-One acceptable exception to this can be `return`, `break` or `continue` statements,
-provided that the test condition isn't very long and its body statement occupies only one line.
-However you can still choose to use the first rule.
-
-```c++
-if (a > 0) return;
-
-while (p)
-{
-    // ...
-    if (!b) continue;
-}
-```
-
-### f. Acceptable conditions to omit braces
-
-When the conditional statement in `if`/`else` has only one line and its body occupy only one line,
-this also applies to loops statements. \
-Notice that for a series of `if - else` branches, if one branch needs braces then all branches must add braces.
-
-```c++
-if (a < b)  // conditional statement
-    do(a);  // body
-
-if (a < b)
-    do(a);
-else if (a > b)
-    do(b);
-else
-    do(c);
-
-if (a < b)
-{
-    do(a);
-}
-else if (a > b)
-{
-    // curly braces required here, then all branches should also add them
-    do(b);
-    do(d);
-}
-else
-{
-    do(c);
-}
-```
-
-### g. Brace enclosed initializers
-
-Unlike single-line functions, you must not insert spaces between the brackets and concluded expressions. \
+#### d. Brace enclosed initializers ####
+Unlike single-line functions, you must not insert spaces between the brackets and concluded expressions.<br/>
 But you must insert a space between the variable name and initializer.
-
 ```c++
 Class obj {}; // empty
 Class obj {expr};
@@ -221,33 +99,67 @@ Class obj {expr1, /*...,*/ exprN};
 QVariantMap map {{"key1", 5}, {"key2", 10}};
 ```
 
-## 2. Indentation
+### 2. If blocks ###
+#### a. Multiple tests ####
+```c++
+if (condition) {
+    // code
+}
+else if (condition) {
+    // code
+}
+else {
+    // code
+}
+```
+The `else if`/`else` must be on their own lines.
 
+#### b. Single statement if blocks ####
+**Most** single statement if blocks should look like this:
+```c++
+if (condition)
+    a = a + b;
+```
+
+One acceptable exception to this **can be** `return`, `break` or `continue` statements, provided that the test condition isn't very long. However you can choose to use the first rule instead.
+```c++
+a = myFunction();
+b = a * 1500;
+
+if (b > 0) return;
+c = 100 / b;
+```
+
+#### c. Using curly braces for single statement if blocks ####
+
+However, there are cases where curly braces for single statement if blocks **should** be used.
+* If some branch needs braces then all others should use them. Unless you have multiple `else if` in a row and the one needing the braces is only for a very small sub-block of code.
+* Another exception would be when we have nested if blocks or generally multiple levels of code that affect code readability.
+
+Generally it will depend on the particular piece of code and would be determined on how readable that piece of code is. **If in doubt** always use braces if one of the above exceptions applies.
+
+### 3. Indentation ###
 4 spaces.
 
-## 3. File encoding and line endings
+### 4. File encoding and line endings. ###
 
 UTF-8 and Unix-like line ending (LF). Unless some platform specific files need other encodings/line endings.
 
-## 4. Initialization lists
-
+### 5. Initialization lists. ###
 Initialization lists should be vertical. This will allow for more easily readable diffs. The initialization colon should be indented and in its own line along with first argument. The rest of the arguments should be indented too and have the comma prepended.
-
 ```c++
 myClass::myClass(int a, int b, int c, int d)
-    : m_a {a}
-    , m_b {b}
-    , m_c {c}
-    , m_d {d}
+    : m_a(a)
+    , m_b(b)
+    , m_c(c)
+    , m_d(d)
 {
     // code
 }
 ```
 
-## 5. Enums
-
+### 6. Enums. ###
 Enums should be vertical. This will allow for more easily readable diffs. The members should be indented.
-
 ```c++
 enum Days
 {
@@ -261,14 +173,11 @@ enum Days
 };
 ```
 
-## 6. Names
-
+### 7. Names. ###
 All names should be camelCased.
 
-### a. Type names and namespaces
-
+#### a. Type names and namespaces ####
 Type names and namespaces start with Upper case letter (except POD types).
-
 ```c++
 class ClassName {};
 
@@ -276,25 +185,21 @@ struct StructName {};
 
 enum EnumName {};
 
-using SomeList = QList<ClassName>;
+typedef QList<ClassName> SomeList;
 
 namespace NamespaceName
 {
 }
 ```
 
-### b. Variable names
-
+#### b. Variable names ####
 Variable names start with lower case letter.
-
 ```c++
 int myVar;
 ```
 
-### c. Private member variable names
-
+#### c. Private member variable names ####
 Private member variable names start with lower case letter and should have ```m_``` prefix.
-
 ```c++
 class MyClass
 {
@@ -302,164 +207,108 @@ class MyClass
 }
 ```
 
-## 7. Header inclusion order
-
-The headers should be placed in the following group order:
-
-1. Module header (in .cpp)
-2. C++ Standard Library headers
-3. System headers
-4. Boost library headers
-5. Libtorrent headers
-6. Qt headers
-7. qBittorrent's own headers, starting from the *base* headers.
-
-The headers should be ordered alphabetically within each group. \
-If there are conditionals for the same header group, then put them at the bottom of the respective group. \
-If there are conditionals that contain headers from several different header groups, then put them above the "qBittorrent's own headers" group.
-
-One exception is the header containing the library version (for example, QtVersionChecks), this particular header isn't constrained by the aforementioned order.
+### 8. Header inclusion order. ###
+The headers should be placed in the following order:
+ 1. Module header (in .cpp)
+ 2. System/Qt/Boost etc. headers (splitted in subcategories if you have many).
+ 3. Application headers, starting from *Base* headers.
 
+The headers should be ordered alphabetically within each group (subgroup).<br/>
+<br/>
 Example:
-
 ```c++
-// file: examplewidget.cpp
+// examplewidget.cpp
 
-// Module header
 #include "examplewidget.h"
 
-// exceptions, headers containing version number
-#include <boost/version.hpp>
-#include <libtorrent/version.hpp>
-#include <QtVersionChecks>
-
-// C++ Standard Library headers
+#include <cmath>
 #include <cstdio>
 
-#ifdef Q_OS_WIN  // conditional
-#include <cmath>
-#endif
-
-// System headers
-#ifdef Q_OS_WIN
-#include <windows.h>
-#endif
-
-// Boost library headers
-#include <boost/circular_buffer.hpp>
-
-// Libtorrent headers
-#include <libtorrent/session.hpp>
-
-// Qt headers
+#include <QDateTime>
+#include <QList>
 #include <QString>
 #include <QUrl>
 
-#ifdef Q_OS_MACOS  // conditional
-#include <QFont>
-#endif
+#include <libtorrent/version.hpp>
 
-// conditional that contains headers from several different header groups
-#if LIBTORRENT_VERSION_NUM >= 10100
-#include <memory>
-#include <QElapsedTimer>
-#endif
-
-// qBittorrent's own headers
 #include "base/bittorrent/infohash.h"
-#include "anothermodule.h"
+#include "base/bittorrent/session.h"
+#include "base/utils/fs.h"
+#include "base/utils/misc.h"
+#include "base/utils/string.h"
 #include "ui_examplewidget.h"
-```
-
-## 8. Include guard
-
-`#pragma once` must be used instead of a "classic include guard":
-
-```c++
-// examplewidget.h
-
-#pragma once
-
-#include <QWidget>
-
-class ExampleWidget : public QWidget
-{
-    // (some code omitted)
-};
 
 ```
 
-## 9. Misc
+### 9. Misc. ###
 
 * Line breaks for long lines with operation:
 
-  ```c++
-  a += "b"
-    + "c"
-    + "d";
-  ```
+```c++
+a += "b"
+  + "c"
+  + "d";
+```
 
 * **auto** keyword
 
-  We allow the use of the **auto** keyword only where it is strictly necessary (for example, to declare a lambda object, etc.), or where it **enhances** the readability of the code. \
-  Declarations for which one can gather enough information about the object interface (type) from its name or the usage pattern (an iterator or a loop variable are good examples of clear patterns) or the right part of the expression nicely fit here.
-
-  When weighing whether to use an auto-typed variable please think about potential reviewers of your code, who will read it as a plain diff (on github.com, for instance). \
-  Please make sure that such reviewers can understand the code completely and without excessive effort.
-
-  Some valid use cases:
-
-  * Container iteration and casts:
-
-    ```c++
-    template <typename List>
-    void doSomethingWithList(const List &list)
-    {
-        foreach (const auto &item, list)
-        {
-            // we don't know item type here so we use 'auto' keyword
-            // do something with item
-        }
+We allow the use of the **auto** keyword only where it is strictly necessary 
+(for example, to declare a lambda object, etc.), or where it **enhances** the readability of the code.
+Declarations for which one can gather enough information about the object interface (type) from its name 
+or the usage pattern (an iterator or a loop variable are good examples of clear patterns) 
+or the right part of the expression nicely fit here.<br/>
+<br/>
+When weighing whether to use an auto-typed variable please think about potential reviewers of your code, 
+who will read it as a plain diff (on github.com, for instance). Please make sure that such reviewers can 
+understand the code completely and without excessive effort.<br/>
+<br/>
+Some valid use cases:
+```c++
+template <typename List>
+void doSomethingWithList(const List &list)
+{
+    foreach (const auto &item, list) {
+        // we don't know item type here so we use 'auto' keyword
+        // do something with item
     }
+}
 
-    for (auto it = container.begin(), end = container.end(); it != end; ++it)
-    {
-        // we don't need to know the exact iterator type,
-        // because all iterators have the same interface
-    }
+for (auto it = container.begin(), end = container.end(); it != end; ++it) {
+    // we don't need to know the exact iterator type,
+    // because all iterators have the same interface
+}
 
-    auto spinBox = static_cast<QSpinBox*>(sender());
-    // we know the variable type based on the right-hand expression
-    ```
+auto spinBox = static_cast<QSpinBox*>(sender());
+// we know the variable type based on the right-hand expression
+```
 
-  * Notice the spaces in the following specific situations:
+* Notice the spaces in the following specific situations:
+```c++
+// Before and after the assignment and other binary (and ternary) operators there should be a space
+// There should not be a space between increment/decrement and its operand
+a += 20;
+a = (b <= MAX_B ? b : MAX_B);
+++a;
+--b;
 
-    ```c++
-    // Before and after the assignment and other binary (and ternary) operators there should be a space
-    // There should not be a space between increment/decrement and its operand
-    a += 20;
-    a = (b <= MAX_B ? b : MAX_B);
-    ++a;
-    --b;
-    for (int a = 0; a < b; ++b)
-    {
-    }
-    // Range-based for loop, spaces before and after the colon
-    for (auto i : container)
-    {
-    }
-    // Derived class, spaces before and after the colon
-    class Derived : public Base
-    {
-    };
-    ```
+for (int a = 0; a < b; ++b) {
+}
+
+// Range-based for loop, spaces before and after the colon
+for (auto i : container) {
+}
+
+// Derived class, spaces before and after the colon
+class Derived : public Base
+{
+};
+```
 
 * Prefer pre-increment, pre-decrement operators
-
-  ```c++
-  ++i, --j;  // yes
-  i++, j--;  // no
-  ```
+```c++
+++i, --j;  // Yes
+i++, j--;  // No
+```
 
 * private/public/protected must not be indented
 
@@ -467,18 +316,5 @@ class ExampleWidget : public QWidget
 
 * Method definitions aren't allowed in header files
 
-## 10. Git commit message
-
-1. Limit the subject line to 50 characters. Subject should contain only the very essence of the changes (you should avoid extra details and internals)
-2. Separate subject from body with a blank line
-3. Capitalize the subject line
-4. Do not end the subject line with a period
-5. Use the imperative mood in the subject line (it's like you're ordering the program to do something (e.g. "Don't create temporary substrings")
-6. Wrap the body at 72 characters
-7. Use the body to explain what and why vs. how
-8. If commit fixes a reported issue, mention it in the message body (e.g. `Closes #4134.`)
-
-## 11. Not covered above
-
-If something isn't covered above, just follow the same style the file you are editing has. \
-*This guide is not exhaustive and the style for a particular piece of code not specified here will be determined by project members on code review.*
+### 10. Not covered above ###
+If something isn't covered above, just follow the same style the file you are editing has. If that particular detail isn't present in the file you are editing, then use whatever the rest of the project uses.

CONTRIBUTING.md

@@ -1,211 +1,35 @@
-# How to contribute to qBittorrent
+# Filing an issue
 
-There are three main ways to contribute to the project.
-Read the respective section to find out more.
+### Must read
+* If you aren't sure, you can ask on the [**forum**](http://forum.qbittorrent.org) or read our [**wiki**](http://wiki.qbittorrent.org) first.
+* Do a quick **search**. Others might already reported the issue.
+* Write in **English**!
+* Provide **version** information: (You can find version numbers at menu `Help -> About -> Libraries`)
+  ```
+  qBittorrent:
+  Qt:
+  libtorrent:
+  boost:
+  OS version:
+  ```
+* Provide **steps** to reproduce the problem, it will be easier to pinpoint the fault.
+* **Screenshots**! A screenshot is worth a thousand words. just upload it. [(How?)](https://help.github.com/articles/file-attachments-on-issues-and-pull-requests)
 
-### Table Of Contents
+### Good to know
+* **Be patient**. The dev team is small and resource limited. Devs finding their free time, analyzing the problem and fixing the issue, it all takes time. :clock3:
+* If you can code, why not become a **contributor** by fixing the issue and open a pull request? :wink:
+* Harsh words or threats won't help your situation. What's worse, your complain will (very likely) to be **ignored**. :fearful:
 
-*   **[Bug reporting etiquette](#bug-reporting-etiquette)**
-*   **[Submitting an issue/bug report](#submitting-an-issuebug-report)**
-    *   [What is an actual bug report?](#what-is-an-actual-bug-report)
-    *   [Before submitting a bug report](#before-submitting-a-bug-report)
-    *   [Steps to ensure a good bug report](#steps-to-ensure-a-good-bug-report)
-*   **[Suggesting enhancements/feature requests](#suggesting-enhancementsfeature-requests)**
-    *   [Before submitting an enhancement/feature request](#before-submitting-an-enhancementfeature-request)
-    *   [Steps to ensure a good enhancement/feature suggestion](#steps-to-ensure-a-good-enhancementfeature-suggestion)
-*   **[Opening a pull request](#opening-a-pull-request)**
-
-# Bug reporting etiquette
-
-*   Issues, pull requests, and comments must always be in **English.**
-
-*   This project is supported by volunteers, do not expect "customer support"-style interaction.
-
-*   **Be patient.** The development team is small and resource limited. Developers and contributors take from their free time to analyze the problem and fix the issue. :clock3:
-
-*   Harsh words or threats won't help your situation. Your complaint will (very likely) be **ignored.** :fearful:
-
-# Submitting an issue/bug report
-
-This section guides you through submitting an issue/bug report for qBittorrent.
-
-Following these guidelines helps maintainers and the community understand your report, reproduce the behavior, and find related reports.
-
-Make sure to follow these rules carefully when submitting a bug report. Failure to do so will result in the issue being closed.
-
-## What is an actual bug report?
-
-Developers and contributors are not supposed to deal with issues for which little to no investigation to find the actual cause of a purported issue was made by the reporter.
-
-Positive contributions are those which are reported with efforts to find the actual cause of an issue, or at the very least efforts were made to narrow it as much as possible.
-
-Requiring people to investigate as much as possible before opening an issue avoids burdening the project with invalid issues or issues unrelated to qBittorrent.
-
-The following are _not_ bug reports. **Check the [wiki][wiki-url], [forum][forum-url] or other places for help and support for issues like these**:
-
--   Explanation of qBittorrent options (see [wiki][wiki-url]).
--   Help with WebUI setup.
--   Help with embedded tracker setup.
--   Help about BitTorrent in general.
--   Issues with specific search plugins.
--   Asking for specific builds of qBittorrent other than the current one. You can install older releases at your own risk or for regression testing purposes. Previous Windows and macOS builds are available [here][builds-url].
-    -   If you want older Linux builds, you will have to compile them yourself from the corresponding commits, or ask someone on the [forum][forum-url] to do it for you.
--   Possibly others. Read on and use common sense.
-
-The issue tracker is for provable issues only: You will have to make the case that the issue is really with qBittorrent and not something else on your side.
-
-To make a case means to provide detailed steps so that anybody can reproduce the issue.
-Be sure to rule out that the issue is not caused by something specific on your side.
-
-Issue reports for bugs that apparently aren't easily reproducible or that you can't figure out what triggers it even though you tried are OK.
-
-Any issue opened without effort to provide the required details for developers, contributors or anybody else to reproduce the problem will be closed as invalid.
-For example:
--   Crash reports with just a stack trace.
--   Speculated performance issues that do not come with actual profiling data + analysis supporting the claim.
-
-## Before submitting a bug report
-
--   **Do some basic troubleshooting (examples)**:
-    -   Restart qBittorrent.
-    -   Restart your PC.
-    -   Update your OS (e.g. Windows updates).
-    -   Update your network card drivers.
-    -   Fully reinstall qBittorrent.
-    -   etc...
--   Make sure the problem is not caused by anti-virus or other program messing with your files.
--   Check if you can reproduce the problem in the latest version of qBittorrent.
--   **Check [forum][forum-url] and [wiki][wiki-url].** You might be able to find the cause of the problem and fix things yourself.
--   **Check if the issue exists already in the issue tracker.**
-    -   If it does and the issue is still open, add a comment to the existing issue instead of opening a new one.
-    -   If you find a Closed issue that seems like it is the same thing that you're experiencing, open a new issue and include a link to the original issue in the body of your new one.
--   If the issue is with the search functionality:
-    -   **Make sure you have [`python`][python-url] installed correctly (remember the search functionality requires a working python installation).**
-    -   Make sure it is in fact a problem with the search functionality itself, and not a problem with the plugins. If something does not work properly with the search functionality, the first step is to rule out search plugin-related issues.
-        -   For search plugin issues, report on the respective search plugin support page, or at [qbittorrent/search-plugins][search-plugins-url].
-
-## Steps to ensure a good bug report
-
-**Follow these guidelines** in order to provide as much useful information as possible right away. Not all of them are applicable to all issues, but you are expected to follow most of these steps (use common sense).
-Otherwise, we've noticed that a lot of your time (and the developers') gets thrown away on exchanging back and forth to get this information.
-
-*   Use a **clear and descriptive title** for the issue to identify the problem.
-
-*   Post only **one specific issue per submission.**
-
-*   **Fill out the issue template properly.**
-
--   **Make sure you are using qBittorrent on a supported platform.** Do not submit issues which can only be reproduced on beta/unsupported releases of supported operating systems (e.g. Windows 10 Insider, Ubuntu 12.04 LTS, etc).
-These are unstable/unsupported platforms, and in all likelihood, whatever the issue is, it is not related to qBittorrent.
-
-*   **Specify the OS you're using, its version and architecture.**
-    *   Examples: Windows 8.1 32-bit, Linux Mint 17.1 64-bit, Windows 10 Fall creators Update 64-bit, etc.
-
-
-*   **Report only if you run into the issue with an official stable release, a beta release, or with the most recent upstream changes (in this last case specify the specific commit you are on).** (beta testing is encouraged :smile:). We do not provide support for bugs on unofficial Windows builds.
-
-*   **Specify the version of qBittorrent** you are using, as well as its **architecture** (x86 or x64) and its **libraries' versions** (Help -> About -> Libraries).
-
-*   Specify **how you installed**:
-    -   Linux: either from the PPA, your distribution's repositories, or compiled from source, or even possibly third-party repositories.
-    -   Windows: either from the installer, or compiled from source, or even possibly third-party repositories.
-    -   macOS: either from the installer, or compiled from source, or even possibly third-party repositories.
-
-
-*   **Describe the exact steps which reproduce the problem in as many details as possible.**
-    -   For example, start by explaining how you started qBittorrent, e.g. was it via the terminal? Desktop icon? Did you start it as root or normal user?
-    -   **When listing steps, don't just say what you did, but explain how you did it.**
-        -   For example, if you added a torrent for download, did you do so via a `.torrent` file or via a magnet link? If it was with a torrent file did you do so by dragging the torrent file from the file manager to the transfer list, or did you use the "Add Torrent File" in the Top Bar?
-    -   Describe the behavior you observed after following the steps and point out what exactly is the problem with that behavior; this is what we'll be looking for after executing the steps.
-
-
-*   **Explain which behavior you expected to see instead** and why.
-
-*   Use **screenshots/animated GIFs to help describe the issue** whenever appropriate [(How?)][attachments-howto-url].
-
-*   If the problem wasn't triggered by a specific action, describe what you were doing before the problem happened.
-
-*   **If you are reporting that qBittorrent crashes**, include the stack trace in the report; include it in a code block, a file attachment, or put it in a gist and provide link to that gist.
-
-*   **For performance-related issues**, include as much profiling data as you can (resource usage graphs, etc).
-
-*   Paste the **qBittorrent log** (or put the contents of the log in a gist and provide a link to the gist). The log can be viewed in the GUI (View -> Log -> tick all boxes). If you can't do that, the file is at:
-    -   Linux: `~/.local/share/qBittorrent/logs/qBittorrent.log`
-    -   Windows: `%LocalAppData%\qBittorrent\logs`
-    -   macOS: `~/Library/Application Support/qBittorrent/qBittorrent.log`
-
-
-*   **Do NOT post comments like "+1" or "me too!"** without providing new relevant info on the issue. Using the built-in reactions is OK though. Remember that you can use the "subscribe" button to receive notifications of that report without having to comment first.
-
-*   If there seems to be an **issue with specific torrent files/magnet links**:
-    -   Don't post private `.torrent` files/magnet links, or ones that point to copyrighted content. If you are willing, offer to email a link or the `.torrent` file itself to whoever developer is debugging it and requests it.
-    -   Make sure you can't reproduce the problem with another client, to rule out the possibility that the issue is with the `.torrent` file/magnet link itself.
-
-
-*   A screenshot, transcription or file upload of any of **qBittorrent's preferences that differ from the defaults.** Please include everything different from the defaults whether or not it seems relevant to your issue.
-
-*   **Attachment rules**:
-    -   Short logs and error messages can be pasted as quotes/code whenever small enough; otherwise make a gist with the contents and post the link to the gist.
-    -   Avoid linking/attaching impractical file formats such as PDFs/Word documents with images. If you want to post an image, just post the image.
-
-### Provide more context by answering these questions (if applicable):
-
--   Can you **reliably reproduce the issue?** If not, provide details about how often the problem happens and under which conditions it normally happens (e.g. only happens with extremely large torrents/only happens after qBittorrent is open for more than 2 days/etc...)
-
--   Did the problem start happening recently (e.g. after updating to a new version of qBittorrent) or was this always a problem?
-
--   If the problem started happening recently, can you reproduce the problem in an older version of qBittorrent?
-
--   Are you saving files locally (in a disk in your machine), or are you saving them remotely (e.g. network drives)?
-
--   Are you using qBittorrent with multiple monitors? If so, can you reproduce the problem when you use a single monitor?
-
-Good read: [How to Report Bugs Effectively][howto-report-bugs-url]
-
-# Suggesting enhancements/feature requests
-
-This section guides you through submitting an enhancement suggestion for qBittorrent, including completely new features and minor improvements to existing functionality.
-
-Following these guidelines helps maintainers and the community understand your suggestion and find related suggestions.
-
-## Before submitting an enhancement/feature request
-
-*   Check the [wiki][wiki-url] and [forum][forum-url] for tips — you might discover that the enhancement is already available.
-*   Most importantly, check if you're using the latest version of qBittorrent and if you can get the desired behavior by changing qBittorrent's settings.
-*   Check in the [releases][releases-url] page or on the [forum][forum-url], see if there's already a alpha/beta version with that enhancement.
-*   Perform a cursory search to see if the enhancement has already been suggested. If it has, add a comment to the existing issue instead of opening a new one.
-
-## Steps to ensure a good enhancement/feature suggestion
-
--   Specify which version of qBittorrent you're using.
--   Specify the name and version of the OS you're using.
--   Provide a step-by-step description of the suggested enhancement in as many details as possible.
--   Describe the current behavior and explain which behavior you expected to see instead and why.
--   Include screenshots and animated GIFs which help you demonstrate the steps or point out the part of qBittorrent which the suggestion is related to.
--   If this enhancement exists in other BitTorrent clients, list those clients.
 
 # Opening a pull request
 
-*   Consult [coding guidelines][coding-guidelines-url] first. If you are working on translation/i18n, read ["How to translate qBittorrent"][how-to-translate-url].
-*   Keep your git commit history clean.
-    * Refer to the section about ["Git commit messages"][coding-guidelines-git-commit-message-url] in the coding guidelines.
-    * When merge conflicts arise, do `git rebase <target_branch_name>` and fix the conflicts, don't do `git pull`. Here is a good explanation: [merging-vs-rebasing][merging-vs-rebasing-url].
-*   Keep pull request title concise and provide motivation and "what it does" in the pull request description area. Make it easy to read and understand.
-*   Provide screenshots for UI related changes.
-*   If your commit addresses a reported issue (for example issue #8454), append the following text to the commit body `Closes #8454.`. Example [commit][commit-message-fix-issue-example-url].
-*   Search [pull request list][pull-request-list-url] first. Others might have already implemented your idea (or got rejected already).
+### Must read
+* Read our [**coding guidelines**](https://github.com/qbittorrent/qBittorrent/blob/master/CODING_GUIDELINES.md). There are some scripts to help you: [uncrustify script](https://raw.githubusercontent.com/qbittorrent/qBittorrent/master/uncrustify.cfg), [astyle script](https://gist.github.com/Chocobo1/539cee860d1eef0acfa6), [(related thread)](https://github.com/qbittorrent/qBittorrent/issues/2192).
+* Keep the title **short** and provide a **clear** description about what your pull request does.
+* Provide **screenshots** for UI related changes.
+* Keep your git commit history **clean** and **precise**. Commits like `xxx fixup` should not appear.
+* If your commit fix a reported issue (for example #4134), add the following message to the commit `Closes #4134.`. Example [here](https://github.com/qbittorrent/qBittorrent/commit/a74bac20c4e8de9776bf9bb77fdc7526135d1988).
 
-[attachments-howto-url]: https://help.github.com/articles/file-attachments-on-issues-and-pull-requests
-[builds-url]: https://sourceforge.net/projects/qbittorrent/files/
-[coding-guidelines-url]: https://github.com/qbittorrent/qBittorrent/blob/master/CODING_GUIDELINES.md
-[coding-guidelines-git-commit-message-url]: https://github.com/qbittorrent/qBittorrent/blob/master/CODING_GUIDELINES.md#10-git-commit-message
-[commit-message-fix-issue-example-url]: https://github.com/qbittorrent/qBittorrent/commit/c07cd440cd46345297debb47cb260f8688975f50
-[forum-url]: https://forum.qbittorrent.org/
-[howto-report-bugs-url]: https://www.chiark.greenend.org.uk/~sgtatham/bugs.html
-[how-to-translate-url]: https://github.com/qbittorrent/qBittorrent/wiki/How-to-translate-qBittorrent
-[merging-vs-rebasing-url]: https://www.atlassian.com/git/tutorials/merging-vs-rebasing
-[pull-request-list-url]: https://github.com/qbittorrent/qBittorrent/pulls
-[python-url]: https://www.python.org/
-[releases-url]: https://github.com/qbittorrent/qBittorrent/releases
-[search-plugins-url]: https://github.com/qbittorrent/search-plugins
-[wiki-url]: https://github.com/qbittorrent/qBittorrent/wiki
+### Good to know
+* **Search** pull request history! Others might already implemented your idea and is waiting to be merged (or got rejected already). Save your precious time by doing a search first.
+* When resolving merge conflicts, do `git rebase <target_branch_name>`, don't do `git pull`. Then you can start fixing the conflicts. Here is a good explanation: [link](https://www.atlassian.com/git/tutorials/merging-vs-rebasing).

COPYING

@@ -1,6 +1,5 @@
-The qBittorrent source code is licensed under the GNU General Public License, version 2 or (at your option) any later version (GPLv2+).
-However, the binary distribution is licensed under GNU General Public License, version 3 or (at your option) any later version (GPLv3+),
-because it contains GPLv3+ assets (eg images). In both cases, the following special exception is added:
+qBittorrent is licensed under the GNU General Public License version 2 with the
+addition of the following special exception:
 
 In addition, as a special exception, the copyright holders give permission to
 link this program with the OpenSSL project's "OpenSSL" library (or with
@@ -11,7 +10,285 @@ modify file(s), you may extend this exception to your version of the file(s),
 but you are not obligated to do so. If you do not wish to do so, delete this
 exception statement from your version.
 
-See also the AUTHORS file
+----------
 
-See COPYING.GPLv2 file for the GPLv2
-See COPYING.GPLv3 file for the GPLv3
+                    GNU GENERAL PUBLIC LICENSE
+                       Version 2, June 1991
+
+ Copyright (C) 1989, 1991 Free Software Foundation, Inc.
+                       51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+                            Preamble
+
+  The licenses for most software are designed to take away your
+freedom to share and change it.  By contrast, the GNU General Public
+License is intended to guarantee your freedom to share and change free
+software--to make sure the software is free for all its users.  This
+General Public License applies to most of the Free Software
+Foundation's software and to any other program whose authors commit to
+using it.  (Some other Free Software Foundation software is covered by
+the GNU Library General Public License instead.)  You can apply it to
+your programs, too.
+
+  When we speak of free software, we are referring to freedom, not
+price.  Our General Public Licenses are designed to make sure that you
+have the freedom to distribute copies of free software (and charge for
+this service if you wish), that you receive source code or can get it
+if you want it, that you can change the software or use pieces of it
+in new free programs; and that you know you can do these things.
+
+  To protect your rights, we need to make restrictions that forbid
+anyone to deny you these rights or to ask you to surrender the rights.
+These restrictions translate to certain responsibilities for you if you
+distribute copies of the software, or if you modify it.
+
+  For example, if you distribute copies of such a program, whether
+gratis or for a fee, you must give the recipients all the rights that
+you have.  You must make sure that they, too, receive or can get the
+source code.  And you must show them these terms so they know their
+rights.
+
+  We protect your rights with two steps: (1) copyright the software, and
+(2) offer you this license which gives you legal permission to copy,
+distribute and/or modify the software.
+
+  Also, for each author's protection and ours, we want to make certain
+that everyone understands that there is no warranty for this free
+software.  If the software is modified by someone else and passed on, we
+want its recipients to know that what they have is not the original, so
+that any problems introduced by others will not reflect on the original
+authors' reputations.
+
+  Finally, any free program is threatened constantly by software
+patents.  We wish to avoid the danger that redistributors of a free
+program will individually obtain patent licenses, in effect making the
+program proprietary.  To prevent this, we have made it clear that any
+patent must be licensed for everyone's free use or not licensed at all.
+
+  The precise terms and conditions for copying, distribution and
+modification follow.
+
+                    GNU GENERAL PUBLIC LICENSE
+   TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
+
+  0. This License applies to any program or other work which contains
+a notice placed by the copyright holder saying it may be distributed
+under the terms of this General Public License.  The "Program", below,
+refers to any such program or work, and a "work based on the Program"
+means either the Program or any derivative work under copyright law:
+that is to say, a work containing the Program or a portion of it,
+either verbatim or with modifications and/or translated into another
+language.  (Hereinafter, translation is included without limitation in
+the term "modification".)  Each licensee is addressed as "you".
+
+Activities other than copying, distribution and modification are not
+covered by this License; they are outside its scope.  The act of
+running the Program is not restricted, and the output from the Program
+is covered only if its contents constitute a work based on the
+Program (independent of having been made by running the Program).
+Whether that is true depends on what the Program does.
+
+  1. You may copy and distribute verbatim copies of the Program's
+source code as you receive it, in any medium, provided that you
+conspicuously and appropriately publish on each copy an appropriate
+copyright notice and disclaimer of warranty; keep intact all the
+notices that refer to this License and to the absence of any warranty;
+and give any other recipients of the Program a copy of this License
+along with the Program.
+
+You may charge a fee for the physical act of transferring a copy, and
+you may at your option offer warranty protection in exchange for a fee.
+
+  2. You may modify your copy or copies of the Program or any portion
+of it, thus forming a work based on the Program, and copy and
+distribute such modifications or work under the terms of Section 1
+above, provided that you also meet all of these conditions:
+
+    a) You must cause the modified files to carry prominent notices
+    stating that you changed the files and the date of any change.
+
+    b) You must cause any work that you distribute or publish, that in
+    whole or in part contains or is derived from the Program or any
+    part thereof, to be licensed as a whole at no charge to all third
+    parties under the terms of this License.
+
+    c) If the modified program normally reads commands interactively
+    when run, you must cause it, when started running for such
+    interactive use in the most ordinary way, to print or display an
+    announcement including an appropriate copyright notice and a
+    notice that there is no warranty (or else, saying that you provide
+    a warranty) and that users may redistribute the program under
+    these conditions, and telling the user how to view a copy of this
+    License.  (Exception: if the Program itself is interactive but
+    does not normally print such an announcement, your work based on
+    the Program is not required to print an announcement.)
+
+These requirements apply to the modified work as a whole.  If
+identifiable sections of that work are not derived from the Program,
+and can be reasonably considered independent and separate works in
+themselves, then this License, and its terms, do not apply to those
+sections when you distribute them as separate works.  But when you
+distribute the same sections as part of a whole which is a work based
+on the Program, the distribution of the whole must be on the terms of
+this License, whose permissions for other licensees extend to the
+entire whole, and thus to each and every part regardless of who wrote it.
+
+Thus, it is not the intent of this section to claim rights or contest
+your rights to work written entirely by you; rather, the intent is to
+exercise the right to control the distribution of derivative or
+collective works based on the Program.
+
+In addition, mere aggregation of another work not based on the Program
+with the Program (or with a work based on the Program) on a volume of
+a storage or distribution medium does not bring the other work under
+the scope of this License.
+
+  3. You may copy and distribute the Program (or a work based on it,
+under Section 2) in object code or executable form under the terms of
+Sections 1 and 2 above provided that you also do one of the following:
+
+    a) Accompany it with the complete corresponding machine-readable
+    source code, which must be distributed under the terms of Sections
+    1 and 2 above on a medium customarily used for software interchange; or,
+
+    b) Accompany it with a written offer, valid for at least three
+    years, to give any third party, for a charge no more than your
+    cost of physically performing source distribution, a complete
+    machine-readable copy of the corresponding source code, to be
+    distributed under the terms of Sections 1 and 2 above on a medium
+    customarily used for software interchange; or,
+
+    c) Accompany it with the information you received as to the offer
+    to distribute corresponding source code.  (This alternative is
+    allowed only for noncommercial distribution and only if you
+    received the program in object code or executable form with such
+    an offer, in accord with Subsection b above.)
+
+The source code for a work means the preferred form of the work for
+making modifications to it.  For an executable work, complete source
+code means all the source code for all modules it contains, plus any
+associated interface definition files, plus the scripts used to
+control compilation and installation of the executable.  However, as a
+special exception, the source code distributed need not include
+anything that is normally distributed (in either source or binary
+form) with the major components (compiler, kernel, and so on) of the
+operating system on which the executable runs, unless that component
+itself accompanies the executable.
+
+If distribution of executable or object code is made by offering
+access to copy from a designated place, then offering equivalent
+access to copy the source code from the same place counts as
+distribution of the source code, even though third parties are not
+compelled to copy the source along with the object code.
+
+  4. You may not copy, modify, sublicense, or distribute the Program
+except as expressly provided under this License.  Any attempt
+otherwise to copy, modify, sublicense or distribute the Program is
+void, and will automatically terminate your rights under this License.
+However, parties who have received copies, or rights, from you under
+this License will not have their licenses terminated so long as such
+parties remain in full compliance.
+
+  5. You are not required to accept this License, since you have not
+signed it.  However, nothing else grants you permission to modify or
+distribute the Program or its derivative works.  These actions are
+prohibited by law if you do not accept this License.  Therefore, by
+modifying or distributing the Program (or any work based on the
+Program), you indicate your acceptance of this License to do so, and
+all its terms and conditions for copying, distributing or modifying
+the Program or works based on it.
+
+  6. Each time you redistribute the Program (or any work based on the
+Program), the recipient automatically receives a license from the
+original licensor to copy, distribute or modify the Program subject to
+these terms and conditions.  You may not impose any further
+restrictions on the recipients' exercise of the rights granted herein.
+You are not responsible for enforcing compliance by third parties to
+this License.
+
+  7. If, as a consequence of a court judgment or allegation of patent
+infringement or for any other reason (not limited to patent issues),
+conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License.  If you cannot
+distribute so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you
+may not distribute the Program at all.  For example, if a patent
+license would not permit royalty-free redistribution of the Program by
+all those who receive copies directly or indirectly through you, then
+the only way you could satisfy both it and this License would be to
+refrain entirely from distribution of the Program.
+
+If any portion of this section is held invalid or unenforceable under
+any particular circumstance, the balance of the section is intended to
+apply and the section as a whole is intended to apply in other
+circumstances.
+
+It is not the purpose of this section to induce you to infringe any
+patents or other property right claims or to contest validity of any
+such claims; this section has the sole purpose of protecting the
+integrity of the free software distribution system, which is
+implemented by public license practices.  Many people have made
+generous contributions to the wide range of software distributed
+through that system in reliance on consistent application of that
+system; it is up to the author/donor to decide if he or she is willing
+to distribute software through any other system and a licensee cannot
+impose that choice.
+
+This section is intended to make thoroughly clear what is believed to
+be a consequence of the rest of this License.
+
+  8. If the distribution and/or use of the Program is restricted in
+certain countries either by patents or by copyrighted interfaces, the
+original copyright holder who places the Program under this License
+may add an explicit geographical distribution limitation excluding
+those countries, so that distribution is permitted only in or among
+countries not thus excluded.  In such case, this License incorporates
+the limitation as if written in the body of this License.
+
+  9. The Free Software Foundation may publish revised and/or new versions
+of the General Public License from time to time.  Such new versions will
+be similar in spirit to the present version, but may differ in detail to
+address new problems or concerns.
+
+Each version is given a distinguishing version number.  If the Program
+specifies a version number of this License which applies to it and "any
+later version", you have the option of following the terms and conditions
+either of that version or of any later version published by the Free
+Software Foundation.  If the Program does not specify a version number of
+this License, you may choose any version ever published by the Free Software
+Foundation.
+
+  10. If you wish to incorporate parts of the Program into other free
+programs whose distribution conditions are different, write to the author
+to ask for permission.  For software which is copyrighted by the Free
+Software Foundation, write to the Free Software Foundation; we sometimes
+make exceptions for this.  Our decision will be guided by the two goals
+of preserving the free status of all derivatives of our free software and
+of promoting the sharing and reuse of software generally.
+
+                            NO WARRANTY
+
+  11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
+FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW.  EXCEPT WHEN
+OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
+PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  THE ENTIRE RISK AS
+TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU.  SHOULD THE
+PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
+REPAIR OR CORRECTION.
+
+  12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
+REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
+INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
+OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
+TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
+YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
+PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGES.
+
+                     END OF TERMS AND CONDITIONS

COPYING.GPLv2

@@ -1,339 +0,0 @@
-                    GNU GENERAL PUBLIC LICENSE
-                       Version 2, June 1991
-
- Copyright (C) 1989, 1991 Free Software Foundation, Inc.,
- 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
- Everyone is permitted to copy and distribute verbatim copies
- of this license document, but changing it is not allowed.
-
-                            Preamble
-
-  The licenses for most software are designed to take away your
-freedom to share and change it.  By contrast, the GNU General Public
-License is intended to guarantee your freedom to share and change free
-software--to make sure the software is free for all its users.  This
-General Public License applies to most of the Free Software
-Foundation's software and to any other program whose authors commit to
-using it.  (Some other Free Software Foundation software is covered by
-the GNU Lesser General Public License instead.)  You can apply it to
-your programs, too.
-
-  When we speak of free software, we are referring to freedom, not
-price.  Our General Public Licenses are designed to make sure that you
-have the freedom to distribute copies of free software (and charge for
-this service if you wish), that you receive source code or can get it
-if you want it, that you can change the software or use pieces of it
-in new free programs; and that you know you can do these things.
-
-  To protect your rights, we need to make restrictions that forbid
-anyone to deny you these rights or to ask you to surrender the rights.
-These restrictions translate to certain responsibilities for you if you
-distribute copies of the software, or if you modify it.
-
-  For example, if you distribute copies of such a program, whether
-gratis or for a fee, you must give the recipients all the rights that
-you have.  You must make sure that they, too, receive or can get the
-source code.  And you must show them these terms so they know their
-rights.
-
-  We protect your rights with two steps: (1) copyright the software, and
-(2) offer you this license which gives you legal permission to copy,
-distribute and/or modify the software.
-
-  Also, for each author's protection and ours, we want to make certain
-that everyone understands that there is no warranty for this free
-software.  If the software is modified by someone else and passed on, we
-want its recipients to know that what they have is not the original, so
-that any problems introduced by others will not reflect on the original
-authors' reputations.
-
-  Finally, any free program is threatened constantly by software
-patents.  We wish to avoid the danger that redistributors of a free
-program will individually obtain patent licenses, in effect making the
-program proprietary.  To prevent this, we have made it clear that any
-patent must be licensed for everyone's free use or not licensed at all.
-
-  The precise terms and conditions for copying, distribution and
-modification follow.
-
-                    GNU GENERAL PUBLIC LICENSE
-   TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
-
-  0. This License applies to any program or other work which contains
-a notice placed by the copyright holder saying it may be distributed
-under the terms of this General Public License.  The "Program", below,
-refers to any such program or work, and a "work based on the Program"
-means either the Program or any derivative work under copyright law:
-that is to say, a work containing the Program or a portion of it,
-either verbatim or with modifications and/or translated into another
-language.  (Hereinafter, translation is included without limitation in
-the term "modification".)  Each licensee is addressed as "you".
-
-Activities other than copying, distribution and modification are not
-covered by this License; they are outside its scope.  The act of
-running the Program is not restricted, and the output from the Program
-is covered only if its contents constitute a work based on the
-Program (independent of having been made by running the Program).
-Whether that is true depends on what the Program does.
-
-  1. You may copy and distribute verbatim copies of the Program's
-source code as you receive it, in any medium, provided that you
-conspicuously and appropriately publish on each copy an appropriate
-copyright notice and disclaimer of warranty; keep intact all the
-notices that refer to this License and to the absence of any warranty;
-and give any other recipients of the Program a copy of this License
-along with the Program.
-
-You may charge a fee for the physical act of transferring a copy, and
-you may at your option offer warranty protection in exchange for a fee.
-
-  2. You may modify your copy or copies of the Program or any portion
-of it, thus forming a work based on the Program, and copy and
-distribute such modifications or work under the terms of Section 1
-above, provided that you also meet all of these conditions:
-
-    a) You must cause the modified files to carry prominent notices
-    stating that you changed the files and the date of any change.
-
-    b) You must cause any work that you distribute or publish, that in
-    whole or in part contains or is derived from the Program or any
-    part thereof, to be licensed as a whole at no charge to all third
-    parties under the terms of this License.
-
-    c) If the modified program normally reads commands interactively
-    when run, you must cause it, when started running for such
-    interactive use in the most ordinary way, to print or display an
-    announcement including an appropriate copyright notice and a
-    notice that there is no warranty (or else, saying that you provide
-    a warranty) and that users may redistribute the program under
-    these conditions, and telling the user how to view a copy of this
-    License.  (Exception: if the Program itself is interactive but
-    does not normally print such an announcement, your work based on
-    the Program is not required to print an announcement.)
-
-These requirements apply to the modified work as a whole.  If
-identifiable sections of that work are not derived from the Program,
-and can be reasonably considered independent and separate works in
-themselves, then this License, and its terms, do not apply to those
-sections when you distribute them as separate works.  But when you
-distribute the same sections as part of a whole which is a work based
-on the Program, the distribution of the whole must be on the terms of
-this License, whose permissions for other licensees extend to the
-entire whole, and thus to each and every part regardless of who wrote it.
-
-Thus, it is not the intent of this section to claim rights or contest
-your rights to work written entirely by you; rather, the intent is to
-exercise the right to control the distribution of derivative or
-collective works based on the Program.
-
-In addition, mere aggregation of another work not based on the Program
-with the Program (or with a work based on the Program) on a volume of
-a storage or distribution medium does not bring the other work under
-the scope of this License.
-
-  3. You may copy and distribute the Program (or a work based on it,
-under Section 2) in object code or executable form under the terms of
-Sections 1 and 2 above provided that you also do one of the following:
-
-    a) Accompany it with the complete corresponding machine-readable
-    source code, which must be distributed under the terms of Sections
-    1 and 2 above on a medium customarily used for software interchange; or,
-
-    b) Accompany it with a written offer, valid for at least three
-    years, to give any third party, for a charge no more than your
-    cost of physically performing source distribution, a complete
-    machine-readable copy of the corresponding source code, to be
-    distributed under the terms of Sections 1 and 2 above on a medium
-    customarily used for software interchange; or,
-
-    c) Accompany it with the information you received as to the offer
-    to distribute corresponding source code.  (This alternative is
-    allowed only for noncommercial distribution and only if you
-    received the program in object code or executable form with such
-    an offer, in accord with Subsection b above.)
-
-The source code for a work means the preferred form of the work for
-making modifications to it.  For an executable work, complete source
-code means all the source code for all modules it contains, plus any
-associated interface definition files, plus the scripts used to
-control compilation and installation of the executable.  However, as a
-special exception, the source code distributed need not include
-anything that is normally distributed (in either source or binary
-form) with the major components (compiler, kernel, and so on) of the
-operating system on which the executable runs, unless that component
-itself accompanies the executable.
-
-If distribution of executable or object code is made by offering
-access to copy from a designated place, then offering equivalent
-access to copy the source code from the same place counts as
-distribution of the source code, even though third parties are not
-compelled to copy the source along with the object code.
-
-  4. You may not copy, modify, sublicense, or distribute the Program
-except as expressly provided under this License.  Any attempt
-otherwise to copy, modify, sublicense or distribute the Program is
-void, and will automatically terminate your rights under this License.
-However, parties who have received copies, or rights, from you under
-this License will not have their licenses terminated so long as such
-parties remain in full compliance.
-
-  5. You are not required to accept this License, since you have not
-signed it.  However, nothing else grants you permission to modify or
-distribute the Program or its derivative works.  These actions are
-prohibited by law if you do not accept this License.  Therefore, by
-modifying or distributing the Program (or any work based on the
-Program), you indicate your acceptance of this License to do so, and
-all its terms and conditions for copying, distributing or modifying
-the Program or works based on it.
-
-  6. Each time you redistribute the Program (or any work based on the
-Program), the recipient automatically receives a license from the
-original licensor to copy, distribute or modify the Program subject to
-these terms and conditions.  You may not impose any further
-restrictions on the recipients' exercise of the rights granted herein.
-You are not responsible for enforcing compliance by third parties to
-this License.
-
-  7. If, as a consequence of a court judgment or allegation of patent
-infringement or for any other reason (not limited to patent issues),
-conditions are imposed on you (whether by court order, agreement or
-otherwise) that contradict the conditions of this License, they do not
-excuse you from the conditions of this License.  If you cannot
-distribute so as to satisfy simultaneously your obligations under this
-License and any other pertinent obligations, then as a consequence you
-may not distribute the Program at all.  For example, if a patent
-license would not permit royalty-free redistribution of the Program by
-all those who receive copies directly or indirectly through you, then
-the only way you could satisfy both it and this License would be to
-refrain entirely from distribution of the Program.
-
-If any portion of this section is held invalid or unenforceable under
-any particular circumstance, the balance of the section is intended to
-apply and the section as a whole is intended to apply in other
-circumstances.
-
-It is not the purpose of this section to induce you to infringe any
-patents or other property right claims or to contest validity of any
-such claims; this section has the sole purpose of protecting the
-integrity of the free software distribution system, which is
-implemented by public license practices.  Many people have made
-generous contributions to the wide range of software distributed
-through that system in reliance on consistent application of that
-system; it is up to the author/donor to decide if he or she is willing
-to distribute software through any other system and a licensee cannot
-impose that choice.
-
-This section is intended to make thoroughly clear what is believed to
-be a consequence of the rest of this License.
-
-  8. If the distribution and/or use of the Program is restricted in
-certain countries either by patents or by copyrighted interfaces, the
-original copyright holder who places the Program under this License
-may add an explicit geographical distribution limitation excluding
-those countries, so that distribution is permitted only in or among
-countries not thus excluded.  In such case, this License incorporates
-the limitation as if written in the body of this License.
-
-  9. The Free Software Foundation may publish revised and/or new versions
-of the General Public License from time to time.  Such new versions will
-be similar in spirit to the present version, but may differ in detail to
-address new problems or concerns.
-
-Each version is given a distinguishing version number.  If the Program
-specifies a version number of this License which applies to it and "any
-later version", you have the option of following the terms and conditions
-either of that version or of any later version published by the Free
-Software Foundation.  If the Program does not specify a version number of
-this License, you may choose any version ever published by the Free Software
-Foundation.
-
-  10. If you wish to incorporate parts of the Program into other free
-programs whose distribution conditions are different, write to the author
-to ask for permission.  For software which is copyrighted by the Free
-Software Foundation, write to the Free Software Foundation; we sometimes
-make exceptions for this.  Our decision will be guided by the two goals
-of preserving the free status of all derivatives of our free software and
-of promoting the sharing and reuse of software generally.
-
-                            NO WARRANTY
-
-  11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
-FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW.  EXCEPT WHEN
-OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
-PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
-OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  THE ENTIRE RISK AS
-TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU.  SHOULD THE
-PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
-REPAIR OR CORRECTION.
-
-  12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
-WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
-REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
-INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
-OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
-TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
-YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
-PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
-POSSIBILITY OF SUCH DAMAGES.
-
-                     END OF TERMS AND CONDITIONS
-
-            How to Apply These Terms to Your New Programs
-
-  If you develop a new program, and you want it to be of the greatest
-possible use to the public, the best way to achieve this is to make it
-free software which everyone can redistribute and change under these terms.
-
-  To do so, attach the following notices to the program.  It is safest
-to attach them to the start of each source file to most effectively
-convey the exclusion of warranty; and each file should have at least
-the "copyright" line and a pointer to where the full notice is found.
-
-    <one line to give the program's name and a brief idea of what it does.>
-    Copyright (C) <year>  <name of author>
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License along
-    with this program; if not, write to the Free Software Foundation, Inc.,
-    51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
-
-Also add information on how to contact you by electronic and paper mail.
-
-If the program is interactive, make it output a short notice like this
-when it starts in an interactive mode:
-
-    Gnomovision version 69, Copyright (C) year name of author
-    Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
-    This is free software, and you are welcome to redistribute it
-    under certain conditions; type `show c' for details.
-
-The hypothetical commands `show w' and `show c' should show the appropriate
-parts of the General Public License.  Of course, the commands you use may
-be called something other than `show w' and `show c'; they could even be
-mouse-clicks or menu items--whatever suits your program.
-
-You should also get your employer (if you work as a programmer) or your
-school, if any, to sign a "copyright disclaimer" for the program, if
-necessary.  Here is a sample; alter the names:
-
-  Yoyodyne, Inc., hereby disclaims all copyright interest in the program
-  `Gnomovision' (which makes passes at compilers) written by James Hacker.
-
-  <signature of Ty Coon>, 1 April 1989
-  Ty Coon, President of Vice
-
-This General Public License does not permit incorporating your program into
-proprietary programs.  If your program is a subroutine library, you may
-consider it more useful to permit linking proprietary applications with the
-library.  If this is what you want to do, use the GNU Lesser General
-Public License instead of this License.

COPYING.GPLv3

@@ -1,674 +0,0 @@
-                    GNU GENERAL PUBLIC LICENSE
-                       Version 3, 29 June 2007
-
- Copyright (C) 2007 Free Software Foundation, Inc. <https://fsf.org/>
- Everyone is permitted to copy and distribute verbatim copies
- of this license document, but changing it is not allowed.
-
-                            Preamble
-
-  The GNU General Public License is a free, copyleft license for
-software and other kinds of works.
-
-  The licenses for most software and other practical works are designed
-to take away your freedom to share and change the works.  By contrast,
-the GNU General Public License is intended to guarantee your freedom to
-share and change all versions of a program--to make sure it remains free
-software for all its users.  We, the Free Software Foundation, use the
-GNU General Public License for most of our software; it applies also to
-any other work released this way by its authors.  You can apply it to
-your programs, too.
-
-  When we speak of free software, we are referring to freedom, not
-price.  Our General Public Licenses are designed to make sure that you
-have the freedom to distribute copies of free software (and charge for
-them if you wish), that you receive source code or can get it if you
-want it, that you can change the software or use pieces of it in new
-free programs, and that you know you can do these things.
-
-  To protect your rights, we need to prevent others from denying you
-these rights or asking you to surrender the rights.  Therefore, you have
-certain responsibilities if you distribute copies of the software, or if
-you modify it: responsibilities to respect the freedom of others.
-
-  For example, if you distribute copies of such a program, whether
-gratis or for a fee, you must pass on to the recipients the same
-freedoms that you received.  You must make sure that they, too, receive
-or can get the source code.  And you must show them these terms so they
-know their rights.
-
-  Developers that use the GNU GPL protect your rights with two steps:
-(1) assert copyright on the software, and (2) offer you this License
-giving you legal permission to copy, distribute and/or modify it.
-
-  For the developers' and authors' protection, the GPL clearly explains
-that there is no warranty for this free software.  For both users' and
-authors' sake, the GPL requires that modified versions be marked as
-changed, so that their problems will not be attributed erroneously to
-authors of previous versions.
-
-  Some devices are designed to deny users access to install or run
-modified versions of the software inside them, although the manufacturer
-can do so.  This is fundamentally incompatible with the aim of
-protecting users' freedom to change the software.  The systematic
-pattern of such abuse occurs in the area of products for individuals to
-use, which is precisely where it is most unacceptable.  Therefore, we
-have designed this version of the GPL to prohibit the practice for those
-products.  If such problems arise substantially in other domains, we
-stand ready to extend this provision to those domains in future versions
-of the GPL, as needed to protect the freedom of users.
-
-  Finally, every program is threatened constantly by software patents.
-States should not allow patents to restrict development and use of
-software on general-purpose computers, but in those that do, we wish to
-avoid the special danger that patents applied to a free program could
-make it effectively proprietary.  To prevent this, the GPL assures that
-patents cannot be used to render the program non-free.
-
-  The precise terms and conditions for copying, distribution and
-modification follow.
-
-                       TERMS AND CONDITIONS
-
-  0. Definitions.
-
-  "This License" refers to version 3 of the GNU General Public License.
-
-  "Copyright" also means copyright-like laws that apply to other kinds of
-works, such as semiconductor masks.
-
-  "The Program" refers to any copyrightable work licensed under this
-License.  Each licensee is addressed as "you".  "Licensees" and
-"recipients" may be individuals or organizations.
-
-  To "modify" a work means to copy from or adapt all or part of the work
-in a fashion requiring copyright permission, other than the making of an
-exact copy.  The resulting work is called a "modified version" of the
-earlier work or a work "based on" the earlier work.
-
-  A "covered work" means either the unmodified Program or a work based
-on the Program.
-
-  To "propagate" a work means to do anything with it that, without
-permission, would make you directly or secondarily liable for
-infringement under applicable copyright law, except executing it on a
-computer or modifying a private copy.  Propagation includes copying,
-distribution (with or without modification), making available to the
-public, and in some countries other activities as well.
-
-  To "convey" a work means any kind of propagation that enables other
-parties to make or receive copies.  Mere interaction with a user through
-a computer network, with no transfer of a copy, is not conveying.
-
-  An interactive user interface displays "Appropriate Legal Notices"
-to the extent that it includes a convenient and prominently visible
-feature that (1) displays an appropriate copyright notice, and (2)
-tells the user that there is no warranty for the work (except to the
-extent that warranties are provided), that licensees may convey the
-work under this License, and how to view a copy of this License.  If
-the interface presents a list of user commands or options, such as a
-menu, a prominent item in the list meets this criterion.
-
-  1. Source Code.
-
-  The "source code" for a work means the preferred form of the work
-for making modifications to it.  "Object code" means any non-source
-form of a work.
-
-  A "Standard Interface" means an interface that either is an official
-standard defined by a recognized standards body, or, in the case of
-interfaces specified for a particular programming language, one that
-is widely used among developers working in that language.
-
-  The "System Libraries" of an executable work include anything, other
-than the work as a whole, that (a) is included in the normal form of
-packaging a Major Component, but which is not part of that Major
-Component, and (b) serves only to enable use of the work with that
-Major Component, or to implement a Standard Interface for which an
-implementation is available to the public in source code form.  A
-"Major Component", in this context, means a major essential component
-(kernel, window system, and so on) of the specific operating system
-(if any) on which the executable work runs, or a compiler used to
-produce the work, or an object code interpreter used to run it.
-
-  The "Corresponding Source" for a work in object code form means all
-the source code needed to generate, install, and (for an executable
-work) run the object code and to modify the work, including scripts to
-control those activities.  However, it does not include the work's
-System Libraries, or general-purpose tools or generally available free
-programs which are used unmodified in performing those activities but
-which are not part of the work.  For example, Corresponding Source
-includes interface definition files associated with source files for
-the work, and the source code for shared libraries and dynamically
-linked subprograms that the work is specifically designed to require,
-such as by intimate data communication or control flow between those
-subprograms and other parts of the work.
-
-  The Corresponding Source need not include anything that users
-can regenerate automatically from other parts of the Corresponding
-Source.
-
-  The Corresponding Source for a work in source code form is that
-same work.
-
-  2. Basic Permissions.
-
-  All rights granted under this License are granted for the term of
-copyright on the Program, and are irrevocable provided the stated
-conditions are met.  This License explicitly affirms your unlimited
-permission to run the unmodified Program.  The output from running a
-covered work is covered by this License only if the output, given its
-content, constitutes a covered work.  This License acknowledges your
-rights of fair use or other equivalent, as provided by copyright law.
-
-  You may make, run and propagate covered works that you do not
-convey, without conditions so long as your license otherwise remains
-in force.  You may convey covered works to others for the sole purpose
-of having them make modifications exclusively for you, or provide you
-with facilities for running those works, provided that you comply with
-the terms of this License in conveying all material for which you do
-not control copyright.  Those thus making or running the covered works
-for you must do so exclusively on your behalf, under your direction
-and control, on terms that prohibit them from making any copies of
-your copyrighted material outside their relationship with you.
-
-  Conveying under any other circumstances is permitted solely under
-the conditions stated below.  Sublicensing is not allowed; section 10
-makes it unnecessary.
-
-  3. Protecting Users' Legal Rights From Anti-Circumvention Law.
-
-  No covered work shall be deemed part of an effective technological
-measure under any applicable law fulfilling obligations under article
-11 of the WIPO copyright treaty adopted on 20 December 1996, or
-similar laws prohibiting or restricting circumvention of such
-measures.
-
-  When you convey a covered work, you waive any legal power to forbid
-circumvention of technological measures to the extent such circumvention
-is effected by exercising rights under this License with respect to
-the covered work, and you disclaim any intention to limit operation or
-modification of the work as a means of enforcing, against the work's
-users, your or third parties' legal rights to forbid circumvention of
-technological measures.
-
-  4. Conveying Verbatim Copies.
-
-  You may convey verbatim copies of the Program's source code as you
-receive it, in any medium, provided that you conspicuously and
-appropriately publish on each copy an appropriate copyright notice;
-keep intact all notices stating that this License and any
-non-permissive terms added in accord with section 7 apply to the code;
-keep intact all notices of the absence of any warranty; and give all
-recipients a copy of this License along with the Program.
-
-  You may charge any price or no price for each copy that you convey,
-and you may offer support or warranty protection for a fee.
-
-  5. Conveying Modified Source Versions.
-
-  You may convey a work based on the Program, or the modifications to
-produce it from the Program, in the form of source code under the
-terms of section 4, provided that you also meet all of these conditions:
-
-    a) The work must carry prominent notices stating that you modified
-    it, and giving a relevant date.
-
-    b) The work must carry prominent notices stating that it is
-    released under this License and any conditions added under section
-    7.  This requirement modifies the requirement in section 4 to
-    "keep intact all notices".
-
-    c) You must license the entire work, as a whole, under this
-    License to anyone who comes into possession of a copy.  This
-    License will therefore apply, along with any applicable section 7
-    additional terms, to the whole of the work, and all its parts,
-    regardless of how they are packaged.  This License gives no
-    permission to license the work in any other way, but it does not
-    invalidate such permission if you have separately received it.
-
-    d) If the work has interactive user interfaces, each must display
-    Appropriate Legal Notices; however, if the Program has interactive
-    interfaces that do not display Appropriate Legal Notices, your
-    work need not make them do so.
-
-  A compilation of a covered work with other separate and independent
-works, which are not by their nature extensions of the covered work,
-and which are not combined with it such as to form a larger program,
-in or on a volume of a storage or distribution medium, is called an
-"aggregate" if the compilation and its resulting copyright are not
-used to limit the access or legal rights of the compilation's users
-beyond what the individual works permit.  Inclusion of a covered work
-in an aggregate does not cause this License to apply to the other
-parts of the aggregate.
-
-  6. Conveying Non-Source Forms.
-
-  You may convey a covered work in object code form under the terms
-of sections 4 and 5, provided that you also convey the
-machine-readable Corresponding Source under the terms of this License,
-in one of these ways:
-
-    a) Convey the object code in, or embodied in, a physical product
-    (including a physical distribution medium), accompanied by the
-    Corresponding Source fixed on a durable physical medium
-    customarily used for software interchange.
-
-    b) Convey the object code in, or embodied in, a physical product
-    (including a physical distribution medium), accompanied by a
-    written offer, valid for at least three years and valid for as
-    long as you offer spare parts or customer support for that product
-    model, to give anyone who possesses the object code either (1) a
-    copy of the Corresponding Source for all the software in the
-    product that is covered by this License, on a durable physical
-    medium customarily used for software interchange, for a price no
-    more than your reasonable cost of physically performing this
-    conveying of source, or (2) access to copy the
-    Corresponding Source from a network server at no charge.
-
-    c) Convey individual copies of the object code with a copy of the
-    written offer to provide the Corresponding Source.  This
-    alternative is allowed only occasionally and noncommercially, and
-    only if you received the object code with such an offer, in accord
-    with subsection 6b.
-
-    d) Convey the object code by offering access from a designated
-    place (gratis or for a charge), and offer equivalent access to the
-    Corresponding Source in the same way through the same place at no
-    further charge.  You need not require recipients to copy the
-    Corresponding Source along with the object code.  If the place to
-    copy the object code is a network server, the Corresponding Source
-    may be on a different server (operated by you or a third party)
-    that supports equivalent copying facilities, provided you maintain
-    clear directions next to the object code saying where to find the
-    Corresponding Source.  Regardless of what server hosts the
-    Corresponding Source, you remain obligated to ensure that it is
-    available for as long as needed to satisfy these requirements.
-
-    e) Convey the object code using peer-to-peer transmission, provided
-    you inform other peers where the object code and Corresponding
-    Source of the work are being offered to the general public at no
-    charge under subsection 6d.
-
-  A separable portion of the object code, whose source code is excluded
-from the Corresponding Source as a System Library, need not be
-included in conveying the object code work.
-
-  A "User Product" is either (1) a "consumer product", which means any
-tangible personal property which is normally used for personal, family,
-or household purposes, or (2) anything designed or sold for incorporation
-into a dwelling.  In determining whether a product is a consumer product,
-doubtful cases shall be resolved in favor of coverage.  For a particular
-product received by a particular user, "normally used" refers to a
-typical or common use of that class of product, regardless of the status
-of the particular user or of the way in which the particular user
-actually uses, or expects or is expected to use, the product.  A product
-is a consumer product regardless of whether the product has substantial
-commercial, industrial or non-consumer uses, unless such uses represent
-the only significant mode of use of the product.
-
-  "Installation Information" for a User Product means any methods,
-procedures, authorization keys, or other information required to install
-and execute modified versions of a covered work in that User Product from
-a modified version of its Corresponding Source.  The information must
-suffice to ensure that the continued functioning of the modified object
-code is in no case prevented or interfered with solely because
-modification has been made.
-
-  If you convey an object code work under this section in, or with, or
-specifically for use in, a User Product, and the conveying occurs as
-part of a transaction in which the right of possession and use of the
-User Product is transferred to the recipient in perpetuity or for a
-fixed term (regardless of how the transaction is characterized), the
-Corresponding Source conveyed under this section must be accompanied
-by the Installation Information.  But this requirement does not apply
-if neither you nor any third party retains the ability to install
-modified object code on the User Product (for example, the work has
-been installed in ROM).
-
-  The requirement to provide Installation Information does not include a
-requirement to continue to provide support service, warranty, or updates
-for a work that has been modified or installed by the recipient, or for
-the User Product in which it has been modified or installed.  Access to a
-network may be denied when the modification itself materially and
-adversely affects the operation of the network or violates the rules and
-protocols for communication across the network.
-
-  Corresponding Source conveyed, and Installation Information provided,
-in accord with this section must be in a format that is publicly
-documented (and with an implementation available to the public in
-source code form), and must require no special password or key for
-unpacking, reading or copying.
-
-  7. Additional Terms.
-
-  "Additional permissions" are terms that supplement the terms of this
-License by making exceptions from one or more of its conditions.
-Additional permissions that are applicable to the entire Program shall
-be treated as though they were included in this License, to the extent
-that they are valid under applicable law.  If additional permissions
-apply only to part of the Program, that part may be used separately
-under those permissions, but the entire Program remains governed by
-this License without regard to the additional permissions.
-
-  When you convey a copy of a covered work, you may at your option
-remove any additional permissions from that copy, or from any part of
-it.  (Additional permissions may be written to require their own
-removal in certain cases when you modify the work.)  You may place
-additional permissions on material, added by you to a covered work,
-for which you have or can give appropriate copyright permission.
-
-  Notwithstanding any other provision of this License, for material you
-add to a covered work, you may (if authorized by the copyright holders of
-that material) supplement the terms of this License with terms:
-
-    a) Disclaiming warranty or limiting liability differently from the
-    terms of sections 15 and 16 of this License; or
-
-    b) Requiring preservation of specified reasonable legal notices or
-    author attributions in that material or in the Appropriate Legal
-    Notices displayed by works containing it; or
-
-    c) Prohibiting misrepresentation of the origin of that material, or
-    requiring that modified versions of such material be marked in
-    reasonable ways as different from the original version; or
-
-    d) Limiting the use for publicity purposes of names of licensors or
-    authors of the material; or
-
-    e) Declining to grant rights under trademark law for use of some
-    trade names, trademarks, or service marks; or
-
-    f) Requiring indemnification of licensors and authors of that
-    material by anyone who conveys the material (or modified versions of
-    it) with contractual assumptions of liability to the recipient, for
-    any liability that these contractual assumptions directly impose on
-    those licensors and authors.
-
-  All other non-permissive additional terms are considered "further
-restrictions" within the meaning of section 10.  If the Program as you
-received it, or any part of it, contains a notice stating that it is
-governed by this License along with a term that is a further
-restriction, you may remove that term.  If a license document contains
-a further restriction but permits relicensing or conveying under this
-License, you may add to a covered work material governed by the terms
-of that license document, provided that the further restriction does
-not survive such relicensing or conveying.
-
-  If you add terms to a covered work in accord with this section, you
-must place, in the relevant source files, a statement of the
-additional terms that apply to those files, or a notice indicating
-where to find the applicable terms.
-
-  Additional terms, permissive or non-permissive, may be stated in the
-form of a separately written license, or stated as exceptions;
-the above requirements apply either way.
-
-  8. Termination.
-
-  You may not propagate or modify a covered work except as expressly
-provided under this License.  Any attempt otherwise to propagate or
-modify it is void, and will automatically terminate your rights under
-this License (including any patent licenses granted under the third
-paragraph of section 11).
-
-  However, if you cease all violation of this License, then your
-license from a particular copyright holder is reinstated (a)
-provisionally, unless and until the copyright holder explicitly and
-finally terminates your license, and (b) permanently, if the copyright
-holder fails to notify you of the violation by some reasonable means
-prior to 60 days after the cessation.
-
-  Moreover, your license from a particular copyright holder is
-reinstated permanently if the copyright holder notifies you of the
-violation by some reasonable means, this is the first time you have
-received notice of violation of this License (for any work) from that
-copyright holder, and you cure the violation prior to 30 days after
-your receipt of the notice.
-
-  Termination of your rights under this section does not terminate the
-licenses of parties who have received copies or rights from you under
-this License.  If your rights have been terminated and not permanently
-reinstated, you do not qualify to receive new licenses for the same
-material under section 10.
-
-  9. Acceptance Not Required for Having Copies.
-
-  You are not required to accept this License in order to receive or
-run a copy of the Program.  Ancillary propagation of a covered work
-occurring solely as a consequence of using peer-to-peer transmission
-to receive a copy likewise does not require acceptance.  However,
-nothing other than this License grants you permission to propagate or
-modify any covered work.  These actions infringe copyright if you do
-not accept this License.  Therefore, by modifying or propagating a
-covered work, you indicate your acceptance of this License to do so.
-
-  10. Automatic Licensing of Downstream Recipients.
-
-  Each time you convey a covered work, the recipient automatically
-receives a license from the original licensors, to run, modify and
-propagate that work, subject to this License.  You are not responsible
-for enforcing compliance by third parties with this License.
-
-  An "entity transaction" is a transaction transferring control of an
-organization, or substantially all assets of one, or subdividing an
-organization, or merging organizations.  If propagation of a covered
-work results from an entity transaction, each party to that
-transaction who receives a copy of the work also receives whatever
-licenses to the work the party's predecessor in interest had or could
-give under the previous paragraph, plus a right to possession of the
-Corresponding Source of the work from the predecessor in interest, if
-the predecessor has it or can get it with reasonable efforts.
-
-  You may not impose any further restrictions on the exercise of the
-rights granted or affirmed under this License.  For example, you may
-not impose a license fee, royalty, or other charge for exercise of
-rights granted under this License, and you may not initiate litigation
-(including a cross-claim or counterclaim in a lawsuit) alleging that
-any patent claim is infringed by making, using, selling, offering for
-sale, or importing the Program or any portion of it.
-
-  11. Patents.
-
-  A "contributor" is a copyright holder who authorizes use under this
-License of the Program or a work on which the Program is based.  The
-work thus licensed is called the contributor's "contributor version".
-
-  A contributor's "essential patent claims" are all patent claims
-owned or controlled by the contributor, whether already acquired or
-hereafter acquired, that would be infringed by some manner, permitted
-by this License, of making, using, or selling its contributor version,
-but do not include claims that would be infringed only as a
-consequence of further modification of the contributor version.  For
-purposes of this definition, "control" includes the right to grant
-patent sublicenses in a manner consistent with the requirements of
-this License.
-
-  Each contributor grants you a non-exclusive, worldwide, royalty-free
-patent license under the contributor's essential patent claims, to
-make, use, sell, offer for sale, import and otherwise run, modify and
-propagate the contents of its contributor version.
-
-  In the following three paragraphs, a "patent license" is any express
-agreement or commitment, however denominated, not to enforce a patent
-(such as an express permission to practice a patent or covenant not to
-sue for patent infringement).  To "grant" such a patent license to a
-party means to make such an agreement or commitment not to enforce a
-patent against the party.
-
-  If you convey a covered work, knowingly relying on a patent license,
-and the Corresponding Source of the work is not available for anyone
-to copy, free of charge and under the terms of this License, through a
-publicly available network server or other readily accessible means,
-then you must either (1) cause the Corresponding Source to be so
-available, or (2) arrange to deprive yourself of the benefit of the
-patent license for this particular work, or (3) arrange, in a manner
-consistent with the requirements of this License, to extend the patent
-license to downstream recipients.  "Knowingly relying" means you have
-actual knowledge that, but for the patent license, your conveying the
-covered work in a country, or your recipient's use of the covered work
-in a country, would infringe one or more identifiable patents in that
-country that you have reason to believe are valid.
-
-  If, pursuant to or in connection with a single transaction or
-arrangement, you convey, or propagate by procuring conveyance of, a
-covered work, and grant a patent license to some of the parties
-receiving the covered work authorizing them to use, propagate, modify
-or convey a specific copy of the covered work, then the patent license
-you grant is automatically extended to all recipients of the covered
-work and works based on it.
-
-  A patent license is "discriminatory" if it does not include within
-the scope of its coverage, prohibits the exercise of, or is
-conditioned on the non-exercise of one or more of the rights that are
-specifically granted under this License.  You may not convey a covered
-work if you are a party to an arrangement with a third party that is
-in the business of distributing software, under which you make payment
-to the third party based on the extent of your activity of conveying
-the work, and under which the third party grants, to any of the
-parties who would receive the covered work from you, a discriminatory
-patent license (a) in connection with copies of the covered work
-conveyed by you (or copies made from those copies), or (b) primarily
-for and in connection with specific products or compilations that
-contain the covered work, unless you entered into that arrangement,
-or that patent license was granted, prior to 28 March 2007.
-
-  Nothing in this License shall be construed as excluding or limiting
-any implied license or other defenses to infringement that may
-otherwise be available to you under applicable patent law.
-
-  12. No Surrender of Others' Freedom.
-
-  If conditions are imposed on you (whether by court order, agreement or
-otherwise) that contradict the conditions of this License, they do not
-excuse you from the conditions of this License.  If you cannot convey a
-covered work so as to satisfy simultaneously your obligations under this
-License and any other pertinent obligations, then as a consequence you may
-not convey it at all.  For example, if you agree to terms that obligate you
-to collect a royalty for further conveying from those to whom you convey
-the Program, the only way you could satisfy both those terms and this
-License would be to refrain entirely from conveying the Program.
-
-  13. Use with the GNU Affero General Public License.
-
-  Notwithstanding any other provision of this License, you have
-permission to link or combine any covered work with a work licensed
-under version 3 of the GNU Affero General Public License into a single
-combined work, and to convey the resulting work.  The terms of this
-License will continue to apply to the part which is the covered work,
-but the special requirements of the GNU Affero General Public License,
-section 13, concerning interaction through a network will apply to the
-combination as such.
-
-  14. Revised Versions of this License.
-
-  The Free Software Foundation may publish revised and/or new versions of
-the GNU General Public License from time to time.  Such new versions will
-be similar in spirit to the present version, but may differ in detail to
-address new problems or concerns.
-
-  Each version is given a distinguishing version number.  If the
-Program specifies that a certain numbered version of the GNU General
-Public License "or any later version" applies to it, you have the
-option of following the terms and conditions either of that numbered
-version or of any later version published by the Free Software
-Foundation.  If the Program does not specify a version number of the
-GNU General Public License, you may choose any version ever published
-by the Free Software Foundation.
-
-  If the Program specifies that a proxy can decide which future
-versions of the GNU General Public License can be used, that proxy's
-public statement of acceptance of a version permanently authorizes you
-to choose that version for the Program.
-
-  Later license versions may give you additional or different
-permissions.  However, no additional obligations are imposed on any
-author or copyright holder as a result of your choosing to follow a
-later version.
-
-  15. Disclaimer of Warranty.
-
-  THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY
-APPLICABLE LAW.  EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT
-HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY
-OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,
-THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
-PURPOSE.  THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM
-IS WITH YOU.  SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF
-ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
-
-  16. Limitation of Liability.
-
-  IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
-WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS
-THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY
-GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE
-USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF
-DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD
-PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS),
-EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF
-SUCH DAMAGES.
-
-  17. Interpretation of Sections 15 and 16.
-
-  If the disclaimer of warranty and limitation of liability provided
-above cannot be given local legal effect according to their terms,
-reviewing courts shall apply local law that most closely approximates
-an absolute waiver of all civil liability in connection with the
-Program, unless a warranty or assumption of liability accompanies a
-copy of the Program in return for a fee.
-
-                     END OF TERMS AND CONDITIONS
-
-            How to Apply These Terms to Your New Programs
-
-  If you develop a new program, and you want it to be of the greatest
-possible use to the public, the best way to achieve this is to make it
-free software which everyone can redistribute and change under these terms.
-
-  To do so, attach the following notices to the program.  It is safest
-to attach them to the start of each source file to most effectively
-state the exclusion of warranty; and each file should have at least
-the "copyright" line and a pointer to where the full notice is found.
-
-    <one line to give the program's name and a brief idea of what it does.>
-    Copyright (C) <year>  <name of author>
-
-    This program is free software: you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation, either version 3 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program.  If not, see <https://www.gnu.org/licenses/>.
-
-Also add information on how to contact you by electronic and paper mail.
-
-  If the program does terminal interaction, make it output a short
-notice like this when it starts in an interactive mode:
-
-    <program>  Copyright (C) <year>  <name of author>
-    This program comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
-    This is free software, and you are welcome to redistribute it
-    under certain conditions; type `show c' for details.
-
-The hypothetical commands `show w' and `show c' should show the appropriate
-parts of the General Public License.  Of course, your program's commands
-might be different; for a GUI interface, you would use an "about box".
-
-  You should also get your employer (if you work as a programmer) or school,
-if any, to sign a "copyright disclaimer" for the program, if necessary.
-For more information on this, and how to apply and follow the GNU GPL, see
-<https://www.gnu.org/licenses/>.
-
-  The GNU General Public License does not permit incorporating your program
-into proprietary programs.  If your program is a subroutine library, you
-may consider it more useful to permit linking proprietary applications with
-the library.  If this is what you want to do, use the GNU Lesser General
-Public License instead of this License.  But first, please read
-<https://www.gnu.org/licenses/why-not-lgpl.html>.

INSTALL

@@ -1,51 +1,54 @@
-qBittorrent - A BitTorrent client in C++ / Qt
+qBittorrent - A BitTorrent client in C++ / Qt4
 ------------------------------------------
 
-1) Install these dependencies:
+1) Compile and install qBittorrent with Qt4 Graphical Interface
 
-  - Boost >= 1.76
-
-  - libtorrent-rasterbar 1.2.19 - 1.2.x || 2.0.10 - 2.0.x
-      * By Arvid Norberg, https://www.libtorrent.org/
-      * Be careful: another library (the one used by rTorrent) uses a similar name
-
-  - OpenSSL >= 3.0.2
-
-  - Qt 6.5.0 - 6.x
-
-  - zlib >= 1.2.11
-
-  - CMake >= 3.16
-      * Compile-time only
-
-  - Python >= 3.7.0
-      * Optional, run-time only
-      * Used by the bundled search engine
-
-Dependency version numbers are bumped every once in a while to keep the range of properly tested configurations manageable, even if not strictly required to build.
-You may be able to build with older versions of (some of) the dependencies other than the minimum versions specified in the build scripts, but support for such builds is not provided - you are on your own.
-Please ensure you are building with an officially supported configuration when reporting bugs.
-
-2a) Compile and install qBittorrent with Qt graphical interface
-
-  $ cmake -B build -DCMAKE_BUILD_TYPE=Release
-  $ cmake --build build
-  $ cmake --install build
+  $ ./configure
+  $ make && make install
   $ qbittorrent
 
-  will install and execute qBittorrent.
+  will install and execute qBittorrent hopefully without any problems.
 
-2b) Compile and install qBittorrent without Qt graphical interface
+  Dependencies:
+    - Qt >= 4.6.0 (libqtgui, libqtcore, libqtnetwork, libqtxml, libqtdbus/optional)
 
-  $ cmake -B build -DCMAKE_BUILD_TYPE=Release -DGUI=OFF
-  $ cmake --build build
-  $ cmake --install build
-  $ qbittorrent-nox
+    - pkg-config executable
+
+    - libtorrent-rasterbar by Arvid Norberg (>= 1.0.6)
+        -> http://www.libtorrent.net
+        Be careful: another library (the one used by rTorrent) uses a similar name.
+
+    - libboost >= 1.35.x (libboost-system)
+
+    - python >= 2.3 (needed by search engine)
+        * Run time only dependency
+
+    - geoip-database (optional)
+        * If qBittorrent cannot find this database, it will try to resolve countries using the Internet but it will be a lot slower.
+        * Run time only dependency
+
+2) Compile and install qBittorrent without Qt4 Graphical interface
+
+  $ ./configure --disable-gui
+  $ make && make install
+  $ qbittorrent
+
+  will install and execute qBittorrent hopefully without any problems.
+
+  Dependencies:
+    - Qt >= 4.4.0 (libqt-devel, libqtcore, libqtnetwork)
+
+    - pkg-config executable
+
+    - libtorrent-rasterbar by Arvid Norberg (>= v1.0.6)
+        -> http://www.libtorrent.net
+        Be careful: another library (the one used by rTorrent) uses a similar name.
+
+    - libboost: libboost-filesystem, libboost-date-time, libboost-thread, libboost-serialization
 
-  will install and execute qBittorrent.
 
 DOCUMENTATION:
-Please note that there is a "Compilation" section at https://wiki.qbittorrent.org.
+Please note that there is a documentation with a "compiling howto" at http://wiki.qbittorrent.org.
 
 ------------------------------------------
-sledgehammer999 <sledgehammer999@qbittorrent.org>
+Christophe Dumez <chris@qbittorrent.org>

NEWS

@@ -0,0 +1,4 @@
+See Changelog
+
+*******************************************
+Christophe dumez - chris@qbittorrent.org

README.md

@@ -1,7 +1,8 @@
 qBittorrent - A BitTorrent client in Qt
 ------------------------------------------
 
-[![GitHub Actions CI Status](https://github.com/qbittorrent/qBittorrent/actions/workflows/ci_ubuntu.yaml/badge.svg)](https://github.com/qbittorrent/qBittorrent/actions)
+[![TravisCI Status](https://travis-ci.org/qbittorrent/qBittorrent.svg?branch=master)](https://travis-ci.org/qbittorrent/qBittorrent)
+[![AppVeyor Status](https://ci.appveyor.com/api/projects/status/github/qbittorrent/qBittorrent?branch=master&svg=true)](https://ci.appveyor.com/project/qbittorrent/qBittorrent)
 [![Coverity Status](https://scan.coverity.com/projects/5494/badge.svg)](https://scan.coverity.com/projects/5494)
 ********************************
 ### Description:
@@ -12,11 +13,19 @@ It aims to be a good alternative to all other bittorrent clients
 out there. qBittorrent is fast, stable and provides unicode
 support as well as many features.
 
-The free [IP to Country Lite database](https://db-ip.com/db/download/ip-to-country-lite) by [DB-IP](https://db-ip.com/) is used for resolving the countries of peers. The database is licensed under the [Creative Commons Attribution 4.0 International License](https://creativecommons.org/licenses/by/4.0/).
+This product includes GeoLite data created by MaxMind, available from
+https://www.maxmind.com/
 
 ### Installation:
+For installation, follow the instructions from INSTALL file, but simple:
 
-Refer to the [INSTALL](INSTALL) file.
+```
+./configure
+make && make install
+qbittorrent
+```
+
+will install and execute qBittorrent hopefully without any problem.
 
 ### Public key:
 Starting from v3.3.4 all source tarballs and binaries are signed.<br />
@@ -26,19 +35,19 @@ You can also download it from [here](https://github.com/qbittorrent/qBittorrent/
 
 ### Misc:
 For more information please visit:
-https://www.qbittorrent.org
+http://www.qbittorrent.org
 
 or our wiki here:
-https://wiki.qbittorrent.org
+http://wiki.qbittorrent.org
 
 Use the forum for troubleshooting before reporting bugs:
-https://forum.qbittorrent.org
+http://forum.qbittorrent.org
 
 Please report any bug (or feature request) to:
-https://bugs.qbittorrent.org
+http://bugs.qbittorrent.org
 
-Official IRC channel:
-[#qbittorrent on irc.libera.chat](ircs://irc.libera.chat:6697/qbittorrent)
+You can also meet me (sledgehammer_999) on IRC:
+`#qbittorrent on irc.freenode.net`
 
 ------------------------------------------
-sledgehammer999 \<sledgehammer999@qbittorrent.org\>
+sledgehammer999 <sledgehammer999@qbittorrent.org>

TODO

@@ -0,0 +1,2 @@
+See https://blueprints.launchpad.net/qbittorrent/
+

bootstrap.sh

@@ -0,0 +1,4 @@
+#!/bin/sh
+
+aclocal -I m4
+autoconf

build-aux/compile

@@ -0,0 +1,347 @@
+#! /bin/sh
+# Wrapper for compilers which do not understand '-c -o'.
+
+scriptversion=2012-10-14.11; # UTC
+
+# Copyright (C) 1999-2014 Free Software Foundation, Inc.
+# Written by Tom Tromey <tromey@cygnus.com>.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# This file is maintained in Automake, please report
+# bugs to <bug-automake@gnu.org> or send patches to
+# <automake-patches@gnu.org>.
+
+nl='
+'
+
+# We need space, tab and new line, in precisely that order.  Quoting is
+# there to prevent tools from complaining about whitespace usage.
+IFS=" ""	$nl"
+
+file_conv=
+
+# func_file_conv build_file lazy
+# Convert a $build file to $host form and store it in $file
+# Currently only supports Windows hosts. If the determined conversion
+# type is listed in (the comma separated) LAZY, no conversion will
+# take place.
+func_file_conv ()
+{
+  file=$1
+  case $file in
+    / | /[!/]*) # absolute file, and not a UNC file
+      if test -z "$file_conv"; then
+	# lazily determine how to convert abs files
+	case `uname -s` in
+	  MINGW*)
+	    file_conv=mingw
+	    ;;
+	  CYGWIN*)
+	    file_conv=cygwin
+	    ;;
+	  *)
+	    file_conv=wine
+	    ;;
+	esac
+      fi
+      case $file_conv/,$2, in
+	*,$file_conv,*)
+	  ;;
+	mingw/*)
+	  file=`cmd //C echo "$file " | sed -e 's/"\(.*\) " *$/\1/'`
+	  ;;
+	cygwin/*)
+	  file=`cygpath -m "$file" || echo "$file"`
+	  ;;
+	wine/*)
+	  file=`winepath -w "$file" || echo "$file"`
+	  ;;
+      esac
+      ;;
+  esac
+}
+
+# func_cl_dashL linkdir
+# Make cl look for libraries in LINKDIR
+func_cl_dashL ()
+{
+  func_file_conv "$1"
+  if test -z "$lib_path"; then
+    lib_path=$file
+  else
+    lib_path="$lib_path;$file"
+  fi
+  linker_opts="$linker_opts -LIBPATH:$file"
+}
+
+# func_cl_dashl library
+# Do a library search-path lookup for cl
+func_cl_dashl ()
+{
+  lib=$1
+  found=no
+  save_IFS=$IFS
+  IFS=';'
+  for dir in $lib_path $LIB
+  do
+    IFS=$save_IFS
+    if $shared && test -f "$dir/$lib.dll.lib"; then
+      found=yes
+      lib=$dir/$lib.dll.lib
+      break
+    fi
+    if test -f "$dir/$lib.lib"; then
+      found=yes
+      lib=$dir/$lib.lib
+      break
+    fi
+    if test -f "$dir/lib$lib.a"; then
+      found=yes
+      lib=$dir/lib$lib.a
+      break
+    fi
+  done
+  IFS=$save_IFS
+
+  if test "$found" != yes; then
+    lib=$lib.lib
+  fi
+}
+
+# func_cl_wrapper cl arg...
+# Adjust compile command to suit cl
+func_cl_wrapper ()
+{
+  # Assume a capable shell
+  lib_path=
+  shared=:
+  linker_opts=
+  for arg
+  do
+    if test -n "$eat"; then
+      eat=
+    else
+      case $1 in
+	-o)
+	  # configure might choose to run compile as 'compile cc -o foo foo.c'.
+	  eat=1
+	  case $2 in
+	    *.o | *.[oO][bB][jJ])
+	      func_file_conv "$2"
+	      set x "$@" -Fo"$file"
+	      shift
+	      ;;
+	    *)
+	      func_file_conv "$2"
+	      set x "$@" -Fe"$file"
+	      shift
+	      ;;
+	  esac
+	  ;;
+	-I)
+	  eat=1
+	  func_file_conv "$2" mingw
+	  set x "$@" -I"$file"
+	  shift
+	  ;;
+	-I*)
+	  func_file_conv "${1#-I}" mingw
+	  set x "$@" -I"$file"
+	  shift
+	  ;;
+	-l)
+	  eat=1
+	  func_cl_dashl "$2"
+	  set x "$@" "$lib"
+	  shift
+	  ;;
+	-l*)
+	  func_cl_dashl "${1#-l}"
+	  set x "$@" "$lib"
+	  shift
+	  ;;
+	-L)
+	  eat=1
+	  func_cl_dashL "$2"
+	  ;;
+	-L*)
+	  func_cl_dashL "${1#-L}"
+	  ;;
+	-static)
+	  shared=false
+	  ;;
+	-Wl,*)
+	  arg=${1#-Wl,}
+	  save_ifs="$IFS"; IFS=','
+	  for flag in $arg; do
+	    IFS="$save_ifs"
+	    linker_opts="$linker_opts $flag"
+	  done
+	  IFS="$save_ifs"
+	  ;;
+	-Xlinker)
+	  eat=1
+	  linker_opts="$linker_opts $2"
+	  ;;
+	-*)
+	  set x "$@" "$1"
+	  shift
+	  ;;
+	*.cc | *.CC | *.cxx | *.CXX | *.[cC]++)
+	  func_file_conv "$1"
+	  set x "$@" -Tp"$file"
+	  shift
+	  ;;
+	*.c | *.cpp | *.CPP | *.lib | *.LIB | *.Lib | *.OBJ | *.obj | *.[oO])
+	  func_file_conv "$1" mingw
+	  set x "$@" "$file"
+	  shift
+	  ;;
+	*)
+	  set x "$@" "$1"
+	  shift
+	  ;;
+      esac
+    fi
+    shift
+  done
+  if test -n "$linker_opts"; then
+    linker_opts="-link$linker_opts"
+  fi
+  exec "$@" $linker_opts
+  exit 1
+}
+
+eat=
+
+case $1 in
+  '')
+     echo "$0: No command.  Try '$0 --help' for more information." 1>&2
+     exit 1;
+     ;;
+  -h | --h*)
+    cat <<\EOF
+Usage: compile [--help] [--version] PROGRAM [ARGS]
+
+Wrapper for compilers which do not understand '-c -o'.
+Remove '-o dest.o' from ARGS, run PROGRAM with the remaining
+arguments, and rename the output as expected.
+
+If you are trying to build a whole package this is not the
+right script to run: please start by reading the file 'INSTALL'.
+
+Report bugs to <bug-automake@gnu.org>.
+EOF
+    exit $?
+    ;;
+  -v | --v*)
+    echo "compile $scriptversion"
+    exit $?
+    ;;
+  cl | *[/\\]cl | cl.exe | *[/\\]cl.exe )
+    func_cl_wrapper "$@"      # Doesn't return...
+    ;;
+esac
+
+ofile=
+cfile=
+
+for arg
+do
+  if test -n "$eat"; then
+    eat=
+  else
+    case $1 in
+      -o)
+	# configure might choose to run compile as 'compile cc -o foo foo.c'.
+	# So we strip '-o arg' only if arg is an object.
+	eat=1
+	case $2 in
+	  *.o | *.obj)
+	    ofile=$2
+	    ;;
+	  *)
+	    set x "$@" -o "$2"
+	    shift
+	    ;;
+	esac
+	;;
+      *.c)
+	cfile=$1
+	set x "$@" "$1"
+	shift
+	;;
+      *)
+	set x "$@" "$1"
+	shift
+	;;
+    esac
+  fi
+  shift
+done
+
+if test -z "$ofile" || test -z "$cfile"; then
+  # If no '-o' option was seen then we might have been invoked from a
+  # pattern rule where we don't need one.  That is ok -- this is a
+  # normal compilation that the losing compiler can handle.  If no
+  # '.c' file was seen then we are probably linking.  That is also
+  # ok.
+  exec "$@"
+fi
+
+# Name of file we expect compiler to create.
+cofile=`echo "$cfile" | sed 's|^.*[\\/]||; s|^[a-zA-Z]:||; s/\.c$/.o/'`
+
+# Create the lock directory.
+# Note: use '[/\\:.-]' here to ensure that we don't use the same name
+# that we are using for the .o file.  Also, base the name on the expected
+# object file name, since that is what matters with a parallel build.
+lockdir=`echo "$cofile" | sed -e 's|[/\\:.-]|_|g'`.d
+while true; do
+  if mkdir "$lockdir" >/dev/null 2>&1; then
+    break
+  fi
+  sleep 1
+done
+# FIXME: race condition here if user kills between mkdir and trap.
+trap "rmdir '$lockdir'; exit 1" 1 2 15
+
+# Run the compile.
+"$@"
+ret=$?
+
+if test -f "$cofile"; then
+  test "$cofile" = "$ofile" || mv "$cofile" "$ofile"
+elif test -f "${cofile}bj"; then
+  test "${cofile}bj" = "$ofile" || mv "${cofile}bj" "$ofile"
+fi
+
+rmdir "$lockdir"
+exit $ret
+
+# Local Variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
+# End:

build-aux/install-sh

@@ -0,0 +1,501 @@
+#!/bin/sh
+# install - install a program, script, or datafile
+
+scriptversion=2013-12-25.23; # UTC
+
+# This originates from X11R5 (mit/util/scripts/install.sh), which was
+# later released in X11R6 (xc/config/util/install.sh) with the
+# following copyright and license.
+#
+# Copyright (C) 1994 X Consortium
+#
+# Permission is hereby granted, free of charge, to any person obtaining a copy
+# of this software and associated documentation files (the "Software"), to
+# deal in the Software without restriction, including without limitation the
+# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
+# sell copies of the Software, and to permit persons to whom the Software is
+# furnished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice shall be included in
+# all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL THE
+# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
+# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
+# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+#
+# Except as contained in this notice, the name of the X Consortium shall not
+# be used in advertising or otherwise to promote the sale, use or other deal-
+# ings in this Software without prior written authorization from the X Consor-
+# tium.
+#
+#
+# FSF changes to this file are in the public domain.
+#
+# Calling this script install-sh is preferred over install.sh, to prevent
+# 'make' implicit rules from creating a file called install from it
+# when there is no Makefile.
+#
+# This script is compatible with the BSD install script, but was written
+# from scratch.
+
+tab='	'
+nl='
+'
+IFS=" $tab$nl"
+
+# Set DOITPROG to "echo" to test this script.
+
+doit=${DOITPROG-}
+doit_exec=${doit:-exec}
+
+# Put in absolute file names if you don't have them in your path;
+# or use environment vars.
+
+chgrpprog=${CHGRPPROG-chgrp}
+chmodprog=${CHMODPROG-chmod}
+chownprog=${CHOWNPROG-chown}
+cmpprog=${CMPPROG-cmp}
+cpprog=${CPPROG-cp}
+mkdirprog=${MKDIRPROG-mkdir}
+mvprog=${MVPROG-mv}
+rmprog=${RMPROG-rm}
+stripprog=${STRIPPROG-strip}
+
+posix_mkdir=
+
+# Desired mode of installed file.
+mode=0755
+
+chgrpcmd=
+chmodcmd=$chmodprog
+chowncmd=
+mvcmd=$mvprog
+rmcmd="$rmprog -f"
+stripcmd=
+
+src=
+dst=
+dir_arg=
+dst_arg=
+
+copy_on_change=false
+is_target_a_directory=possibly
+
+usage="\
+Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
+   or: $0 [OPTION]... SRCFILES... DIRECTORY
+   or: $0 [OPTION]... -t DIRECTORY SRCFILES...
+   or: $0 [OPTION]... -d DIRECTORIES...
+
+In the 1st form, copy SRCFILE to DSTFILE.
+In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
+In the 4th, create DIRECTORIES.
+
+Options:
+     --help     display this help and exit.
+     --version  display version info and exit.
+
+  -c            (ignored)
+  -C            install only if different (preserve the last data modification time)
+  -d            create directories instead of installing files.
+  -g GROUP      $chgrpprog installed files to GROUP.
+  -m MODE       $chmodprog installed files to MODE.
+  -o USER       $chownprog installed files to USER.
+  -s            $stripprog installed files.
+  -t DIRECTORY  install into DIRECTORY.
+  -T            report an error if DSTFILE is a directory.
+
+Environment variables override the default commands:
+  CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG
+  RMPROG STRIPPROG
+"
+
+while test $# -ne 0; do
+  case $1 in
+    -c) ;;
+
+    -C) copy_on_change=true;;
+
+    -d) dir_arg=true;;
+
+    -g) chgrpcmd="$chgrpprog $2"
+        shift;;
+
+    --help) echo "$usage"; exit $?;;
+
+    -m) mode=$2
+        case $mode in
+          *' '* | *"$tab"* | *"$nl"* | *'*'* | *'?'* | *'['*)
+            echo "$0: invalid mode: $mode" >&2
+            exit 1;;
+        esac
+        shift;;
+
+    -o) chowncmd="$chownprog $2"
+        shift;;
+
+    -s) stripcmd=$stripprog;;
+
+    -t)
+        is_target_a_directory=always
+        dst_arg=$2
+        # Protect names problematic for 'test' and other utilities.
+        case $dst_arg in
+          -* | [=\(\)!]) dst_arg=./$dst_arg;;
+        esac
+        shift;;
+
+    -T) is_target_a_directory=never;;
+
+    --version) echo "$0 $scriptversion"; exit $?;;
+
+    --) shift
+        break;;
+
+    -*) echo "$0: invalid option: $1" >&2
+        exit 1;;
+
+    *)  break;;
+  esac
+  shift
+done
+
+# We allow the use of options -d and -T together, by making -d
+# take the precedence; this is for compatibility with GNU install.
+
+if test -n "$dir_arg"; then
+  if test -n "$dst_arg"; then
+    echo "$0: target directory not allowed when installing a directory." >&2
+    exit 1
+  fi
+fi
+
+if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then
+  # When -d is used, all remaining arguments are directories to create.
+  # When -t is used, the destination is already specified.
+  # Otherwise, the last argument is the destination.  Remove it from $@.
+  for arg
+  do
+    if test -n "$dst_arg"; then
+      # $@ is not empty: it contains at least $arg.
+      set fnord "$@" "$dst_arg"
+      shift # fnord
+    fi
+    shift # arg
+    dst_arg=$arg
+    # Protect names problematic for 'test' and other utilities.
+    case $dst_arg in
+      -* | [=\(\)!]) dst_arg=./$dst_arg;;
+    esac
+  done
+fi
+
+if test $# -eq 0; then
+  if test -z "$dir_arg"; then
+    echo "$0: no input file specified." >&2
+    exit 1
+  fi
+  # It's OK to call 'install-sh -d' without argument.
+  # This can happen when creating conditional directories.
+  exit 0
+fi
+
+if test -z "$dir_arg"; then
+  if test $# -gt 1 || test "$is_target_a_directory" = always; then
+    if test ! -d "$dst_arg"; then
+      echo "$0: $dst_arg: Is not a directory." >&2
+      exit 1
+    fi
+  fi
+fi
+
+if test -z "$dir_arg"; then
+  do_exit='(exit $ret); exit $ret'
+  trap "ret=129; $do_exit" 1
+  trap "ret=130; $do_exit" 2
+  trap "ret=141; $do_exit" 13
+  trap "ret=143; $do_exit" 15
+
+  # Set umask so as not to create temps with too-generous modes.
+  # However, 'strip' requires both read and write access to temps.
+  case $mode in
+    # Optimize common cases.
+    *644) cp_umask=133;;
+    *755) cp_umask=22;;
+
+    *[0-7])
+      if test -z "$stripcmd"; then
+        u_plus_rw=
+      else
+        u_plus_rw='% 200'
+      fi
+      cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;;
+    *)
+      if test -z "$stripcmd"; then
+        u_plus_rw=
+      else
+        u_plus_rw=,u+rw
+      fi
+      cp_umask=$mode$u_plus_rw;;
+  esac
+fi
+
+for src
+do
+  # Protect names problematic for 'test' and other utilities.
+  case $src in
+    -* | [=\(\)!]) src=./$src;;
+  esac
+
+  if test -n "$dir_arg"; then
+    dst=$src
+    dstdir=$dst
+    test -d "$dstdir"
+    dstdir_status=$?
+  else
+
+    # Waiting for this to be detected by the "$cpprog $src $dsttmp" command
+    # might cause directories to be created, which would be especially bad
+    # if $src (and thus $dsttmp) contains '*'.
+    if test ! -f "$src" && test ! -d "$src"; then
+      echo "$0: $src does not exist." >&2
+      exit 1
+    fi
+
+    if test -z "$dst_arg"; then
+      echo "$0: no destination specified." >&2
+      exit 1
+    fi
+    dst=$dst_arg
+
+    # If destination is a directory, append the input filename; won't work
+    # if double slashes aren't ignored.
+    if test -d "$dst"; then
+      if test "$is_target_a_directory" = never; then
+        echo "$0: $dst_arg: Is a directory" >&2
+        exit 1
+      fi
+      dstdir=$dst
+      dst=$dstdir/`basename "$src"`
+      dstdir_status=0
+    else
+      dstdir=`dirname "$dst"`
+      test -d "$dstdir"
+      dstdir_status=$?
+    fi
+  fi
+
+  obsolete_mkdir_used=false
+
+  if test $dstdir_status != 0; then
+    case $posix_mkdir in
+      '')
+        # Create intermediate dirs using mode 755 as modified by the umask.
+        # This is like FreeBSD 'install' as of 1997-10-28.
+        umask=`umask`
+        case $stripcmd.$umask in
+          # Optimize common cases.
+          *[2367][2367]) mkdir_umask=$umask;;
+          .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;;
+
+          *[0-7])
+            mkdir_umask=`expr $umask + 22 \
+              - $umask % 100 % 40 + $umask % 20 \
+              - $umask % 10 % 4 + $umask % 2
+            `;;
+          *) mkdir_umask=$umask,go-w;;
+        esac
+
+        # With -d, create the new directory with the user-specified mode.
+        # Otherwise, rely on $mkdir_umask.
+        if test -n "$dir_arg"; then
+          mkdir_mode=-m$mode
+        else
+          mkdir_mode=
+        fi
+
+        posix_mkdir=false
+        case $umask in
+          *[123567][0-7][0-7])
+            # POSIX mkdir -p sets u+wx bits regardless of umask, which
+            # is incompatible with FreeBSD 'install' when (umask & 300) != 0.
+            ;;
+          *)
+            tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
+            trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0
+
+            if (umask $mkdir_umask &&
+                exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1
+            then
+              if test -z "$dir_arg" || {
+                   # Check for POSIX incompatibilities with -m.
+                   # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
+                   # other-writable bit of parent directory when it shouldn't.
+                   # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
+                   ls_ld_tmpdir=`ls -ld "$tmpdir"`
+                   case $ls_ld_tmpdir in
+                     d????-?r-*) different_mode=700;;
+                     d????-?--*) different_mode=755;;
+                     *) false;;
+                   esac &&
+                   $mkdirprog -m$different_mode -p -- "$tmpdir" && {
+                     ls_ld_tmpdir_1=`ls -ld "$tmpdir"`
+                     test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
+                   }
+                 }
+              then posix_mkdir=:
+              fi
+              rmdir "$tmpdir/d" "$tmpdir"
+            else
+              # Remove any dirs left behind by ancient mkdir implementations.
+              rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null
+            fi
+            trap '' 0;;
+        esac;;
+    esac
+
+    if
+      $posix_mkdir && (
+        umask $mkdir_umask &&
+        $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
+      )
+    then :
+    else
+
+      # The umask is ridiculous, or mkdir does not conform to POSIX,
+      # or it failed possibly due to a race condition.  Create the
+      # directory the slow way, step by step, checking for races as we go.
+
+      case $dstdir in
+        /*) prefix='/';;
+        [-=\(\)!]*) prefix='./';;
+        *)  prefix='';;
+      esac
+
+      oIFS=$IFS
+      IFS=/
+      set -f
+      set fnord $dstdir
+      shift
+      set +f
+      IFS=$oIFS
+
+      prefixes=
+
+      for d
+      do
+        test X"$d" = X && continue
+
+        prefix=$prefix$d
+        if test -d "$prefix"; then
+          prefixes=
+        else
+          if $posix_mkdir; then
+            (umask=$mkdir_umask &&
+             $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
+            # Don't fail if two instances are running concurrently.
+            test -d "$prefix" || exit 1
+          else
+            case $prefix in
+              *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
+              *) qprefix=$prefix;;
+            esac
+            prefixes="$prefixes '$qprefix'"
+          fi
+        fi
+        prefix=$prefix/
+      done
+
+      if test -n "$prefixes"; then
+        # Don't fail if two instances are running concurrently.
+        (umask $mkdir_umask &&
+         eval "\$doit_exec \$mkdirprog $prefixes") ||
+          test -d "$dstdir" || exit 1
+        obsolete_mkdir_used=true
+      fi
+    fi
+  fi
+
+  if test -n "$dir_arg"; then
+    { test -z "$chowncmd" || $doit $chowncmd "$dst"; } &&
+    { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } &&
+    { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false ||
+      test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1
+  else
+
+    # Make a couple of temp file names in the proper directory.
+    dsttmp=$dstdir/_inst.$$_
+    rmtmp=$dstdir/_rm.$$_
+
+    # Trap to clean up those temp files at exit.
+    trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
+
+    # Copy the file name to the temp name.
+    (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") &&
+
+    # and set any options; do chmod last to preserve setuid bits.
+    #
+    # If any of these fail, we abort the whole thing.  If we want to
+    # ignore errors from any of these, just make sure not to ignore
+    # errors from the above "$doit $cpprog $src $dsttmp" command.
+    #
+    { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } &&
+    { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } &&
+    { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } &&
+    { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } &&
+
+    # If -C, don't bother to copy if it wouldn't change the file.
+    if $copy_on_change &&
+       old=`LC_ALL=C ls -dlL "$dst"     2>/dev/null` &&
+       new=`LC_ALL=C ls -dlL "$dsttmp"  2>/dev/null` &&
+       set -f &&
+       set X $old && old=:$2:$4:$5:$6 &&
+       set X $new && new=:$2:$4:$5:$6 &&
+       set +f &&
+       test "$old" = "$new" &&
+       $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1
+    then
+      rm -f "$dsttmp"
+    else
+      # Rename the file to the real destination.
+      $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null ||
+
+      # The rename failed, perhaps because mv can't rename something else
+      # to itself, or perhaps because mv is so ancient that it does not
+      # support -f.
+      {
+        # Now remove or move aside any old file at destination location.
+        # We try this two ways since rm can't unlink itself on some
+        # systems and the destination file might be busy for other
+        # reasons.  In this case, the final cleanup might fail but the new
+        # file should still install successfully.
+        {
+          test ! -f "$dst" ||
+          $doit $rmcmd -f "$dst" 2>/dev/null ||
+          { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null &&
+            { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }
+          } ||
+          { echo "$0: cannot unlink or rename $dst" >&2
+            (exit 1); exit 1
+          }
+        } &&
+
+        # Now rename the file to the real destination.
+        $doit $mvcmd "$dsttmp" "$dst"
+      }
+    fi || exit 1
+
+    trap '' 0
+  fi
+done
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
+# End:

build-aux/missing

@@ -0,0 +1,215 @@
+#! /bin/sh
+# Common wrapper for a few potentially missing GNU programs.
+
+scriptversion=2013-10-28.13; # UTC
+
+# Copyright (C) 1996-2014 Free Software Foundation, Inc.
+# Originally written by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+if test $# -eq 0; then
+  echo 1>&2 "Try '$0 --help' for more information"
+  exit 1
+fi
+
+case $1 in
+
+  --is-lightweight)
+    # Used by our autoconf macros to check whether the available missing
+    # script is modern enough.
+    exit 0
+    ;;
+
+  --run)
+    # Back-compat with the calling convention used by older automake.
+    shift
+    ;;
+
+  -h|--h|--he|--hel|--help)
+    echo "\
+$0 [OPTION]... PROGRAM [ARGUMENT]...
+
+Run 'PROGRAM [ARGUMENT]...', returning a proper advice when this fails due
+to PROGRAM being missing or too old.
+
+Options:
+  -h, --help      display this help and exit
+  -v, --version   output version information and exit
+
+Supported PROGRAM values:
+  aclocal   autoconf  autoheader   autom4te  automake  makeinfo
+  bison     yacc      flex         lex       help2man
+
+Version suffixes to PROGRAM as well as the prefixes 'gnu-', 'gnu', and
+'g' are ignored when checking the name.
+
+Send bug reports to <bug-automake@gnu.org>."
+    exit $?
+    ;;
+
+  -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
+    echo "missing $scriptversion (GNU Automake)"
+    exit $?
+    ;;
+
+  -*)
+    echo 1>&2 "$0: unknown '$1' option"
+    echo 1>&2 "Try '$0 --help' for more information"
+    exit 1
+    ;;
+
+esac
+
+# Run the given program, remember its exit status.
+"$@"; st=$?
+
+# If it succeeded, we are done.
+test $st -eq 0 && exit 0
+
+# Also exit now if we it failed (or wasn't found), and '--version' was
+# passed; such an option is passed most likely to detect whether the
+# program is present and works.
+case $2 in --version|--help) exit $st;; esac
+
+# Exit code 63 means version mismatch.  This often happens when the user
+# tries to use an ancient version of a tool on a file that requires a
+# minimum version.
+if test $st -eq 63; then
+  msg="probably too old"
+elif test $st -eq 127; then
+  # Program was missing.
+  msg="missing on your system"
+else
+  # Program was found and executed, but failed.  Give up.
+  exit $st
+fi
+
+perl_URL=http://www.perl.org/
+flex_URL=http://flex.sourceforge.net/
+gnu_software_URL=http://www.gnu.org/software
+
+program_details ()
+{
+  case $1 in
+    aclocal|automake)
+      echo "The '$1' program is part of the GNU Automake package:"
+      echo "<$gnu_software_URL/automake>"
+      echo "It also requires GNU Autoconf, GNU m4 and Perl in order to run:"
+      echo "<$gnu_software_URL/autoconf>"
+      echo "<$gnu_software_URL/m4/>"
+      echo "<$perl_URL>"
+      ;;
+    autoconf|autom4te|autoheader)
+      echo "The '$1' program is part of the GNU Autoconf package:"
+      echo "<$gnu_software_URL/autoconf/>"
+      echo "It also requires GNU m4 and Perl in order to run:"
+      echo "<$gnu_software_URL/m4/>"
+      echo "<$perl_URL>"
+      ;;
+  esac
+}
+
+give_advice ()
+{
+  # Normalize program name to check for.
+  normalized_program=`echo "$1" | sed '
+    s/^gnu-//; t
+    s/^gnu//; t
+    s/^g//; t'`
+
+  printf '%s\n' "'$1' is $msg."
+
+  configure_deps="'configure.ac' or m4 files included by 'configure.ac'"
+  case $normalized_program in
+    autoconf*)
+      echo "You should only need it if you modified 'configure.ac',"
+      echo "or m4 files included by it."
+      program_details 'autoconf'
+      ;;
+    autoheader*)
+      echo "You should only need it if you modified 'acconfig.h' or"
+      echo "$configure_deps."
+      program_details 'autoheader'
+      ;;
+    automake*)
+      echo "You should only need it if you modified 'Makefile.am' or"
+      echo "$configure_deps."
+      program_details 'automake'
+      ;;
+    aclocal*)
+      echo "You should only need it if you modified 'acinclude.m4' or"
+      echo "$configure_deps."
+      program_details 'aclocal'
+      ;;
+   autom4te*)
+      echo "You might have modified some maintainer files that require"
+      echo "the 'autom4te' program to be rebuilt."
+      program_details 'autom4te'
+      ;;
+    bison*|yacc*)
+      echo "You should only need it if you modified a '.y' file."
+      echo "You may want to install the GNU Bison package:"
+      echo "<$gnu_software_URL/bison/>"
+      ;;
+    lex*|flex*)
+      echo "You should only need it if you modified a '.l' file."
+      echo "You may want to install the Fast Lexical Analyzer package:"
+      echo "<$flex_URL>"
+      ;;
+    help2man*)
+      echo "You should only need it if you modified a dependency" \
+           "of a man page."
+      echo "You may want to install the GNU Help2man package:"
+      echo "<$gnu_software_URL/help2man/>"
+    ;;
+    makeinfo*)
+      echo "You should only need it if you modified a '.texi' file, or"
+      echo "any other file indirectly affecting the aspect of the manual."
+      echo "You might want to install the Texinfo package:"
+      echo "<$gnu_software_URL/texinfo/>"
+      echo "The spurious makeinfo call might also be the consequence of"
+      echo "using a buggy 'make' (AIX, DU, IRIX), in which case you might"
+      echo "want to install GNU make:"
+      echo "<$gnu_software_URL/make/>"
+      ;;
+    *)
+      echo "You might have modified some files without having the proper"
+      echo "tools for further handling them.  Check the 'README' file, it"
+      echo "often tells you about the needed prerequisites for installing"
+      echo "this package.  You may also peek at any GNU archive site, in"
+      echo "case some other package contains this missing '$1' program."
+      ;;
+  esac
+}
+
+give_advice "$1" | sed -e '1s/^/WARNING: /' \
+                       -e '2,$s/^/         /' >&2
+
+# Propagate the correct exit status (expected to be 127 for a program
+# not found, 63 for a program that failed due to version mismatch).
+exit $st
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
+# End:

build_dist.sh

@@ -1,19 +0,0 @@
-#!/bin/sh
-
-# get version numbers
-versionSrc="src/base/version.h.in"
-versionMajor="$(grep -Po '(?<=QBT_VERSION_MAJOR )\d+' "$versionSrc")"
-versionMinor="$(grep -Po '(?<=QBT_VERSION_MINOR )\d+' "$versionSrc")"
-versionBugfix="$(grep -Po '(?<=QBT_VERSION_BUGFIX )\d+' "$versionSrc")"
-versionBuild="$(grep -Po '(?<=QBT_VERSION_BUILD )\d+' "$versionSrc")"
-versionStatus="$(grep -Po '(?<=QBT_VERSION_STATUS ")\w+' "$versionSrc")"
-
-if [ "$versionBuild" != "0" ]; then
-    projectVersion="$versionMajor.$versionMinor.$versionBugfix.$versionBuild$versionStatus"
-else
-    projectVersion="$versionMajor.$versionMinor.$versionBugfix$versionStatus"
-fi
-
-# pack archives
-git archive --format=tar --prefix="qbittorrent-$projectVersion/" HEAD | gzip -9 > "qbittorrent-$projectVersion.tar.gz"
-git archive --format=tar --prefix="qbittorrent-$projectVersion/" HEAD | xz -9 > "qbittorrent-$projectVersion.tar.xz"

cmake/Modules/CheckPackages.cmake

@@ -1,56 +0,0 @@
-# use CONFIG mode first in find_package
-set(CMAKE_FIND_PACKAGE_PREFER_CONFIG ON)
-
-macro(find_libtorrent version)
-    if (UNIX AND (NOT APPLE) AND (NOT CYGWIN))
-        find_package(LibtorrentRasterbar QUIET ${version} COMPONENTS torrent-rasterbar)
-        if (NOT LibtorrentRasterbar_FOUND)
-            include(FindPkgConfig)
-            pkg_check_modules(LibtorrentRasterbar IMPORTED_TARGET GLOBAL "libtorrent-rasterbar>=${version}")
-            if (NOT LibtorrentRasterbar_FOUND)
-                message(
-                    FATAL_ERROR
-                    "Package LibtorrentRasterbar >= ${version} not found"
-                    " with CMake or pkg-config.\n- Set LibtorrentRasterbar_DIR to a directory containing"
-                    " a LibtorrentRasterbarConfig.cmake file or add the installation prefix of LibtorrentRasterbar"
-                    " to CMAKE_PREFIX_PATH.\n- Alternatively, make sure there is a valid libtorrent-rasterbar.pc"
-                    " file in your system's pkg-config search paths (use the system environment variable PKG_CONFIG_PATH"
-                    " to specify additional search paths if needed)."
-                )
-            endif()
-            add_library(LibtorrentRasterbar::torrent-rasterbar ALIAS PkgConfig::LibtorrentRasterbar)
-            # force a fake package to show up in the feature summary
-            set_property(GLOBAL APPEND PROPERTY
-                PACKAGES_FOUND
-                "LibtorrentRasterbar via pkg-config (version >= ${version})"
-            )
-            set_package_properties("LibtorrentRasterbar via pkg-config (version >= ${version})"
-                PROPERTIES
-                TYPE REQUIRED
-            )
-        else()
-            set_package_properties(LibtorrentRasterbar PROPERTIES TYPE REQUIRED)
-        endif()
-    else()
-        find_package(LibtorrentRasterbar ${version} REQUIRED COMPONENTS torrent-rasterbar)
-    endif()
-endmacro()
-
-find_libtorrent(${minLibtorrent1Version})
-if (LibtorrentRasterbar_FOUND AND (LibtorrentRasterbar_VERSION VERSION_GREATER_EQUAL 2.0))
-    find_libtorrent(${minLibtorrentVersion})
-endif()
-
-# force variable type so that it always shows up in ccmake/cmake-gui frontends
-set_property(CACHE LibtorrentRasterbar_DIR PROPERTY TYPE PATH)
-find_package(Boost ${minBoostVersion} REQUIRED)
-find_package(OpenSSL ${minOpenSSLVersion} REQUIRED)
-find_package(ZLIB ${minZlibVersion} REQUIRED)
-find_package(Qt6 ${minQt6Version} REQUIRED COMPONENTS Core Network Sql Xml LinguistTools)
-if (DBUS)
-    find_package(Qt6 ${minQt6Version} REQUIRED COMPONENTS DBus)
-    set_package_properties(Qt6DBus PROPERTIES
-        DESCRIPTION "Qt6 module for inter-process communication over the D-Bus protocol"
-        PURPOSE "Required by the DBUS feature"
-    )
-endif()

cmake/Modules/CommonConfig.cmake

@@ -1,111 +0,0 @@
-# Set platform variables and create some interface-only library targets
-# that some or all other targets will link to, either directly or transitively,
-# to consume common compile options/definitions
-
-# treat value specified by the CXX_STANDARD target property as a requirement by default
-set(CMAKE_CXX_STANDARD_REQUIRED ON)
-set(CMAKE_CXX_EXTENSIONS OFF)
-
-set(CMAKE_AUTOMOC ON)
-set(CMAKE_AUTORCC ON)
-set(CMAKE_AUTORCC_OPTIONS --compress-algo best --threshold 5)
-
-add_library(qbt_common_cfg INTERFACE)
-
-# C++ 20 support is required
-# See also https://cmake.org/cmake/help/latest/prop_gbl/CMAKE_CXX_KNOWN_FEATURES.html
-# for a breakdown of the features that CMake recognizes for each C++ standard
-target_compile_features(qbt_common_cfg INTERFACE
-    cxx_std_20
-)
-
-target_compile_definitions(qbt_common_cfg INTERFACE
-    QT_DISABLE_DEPRECATED_UP_TO=0x060500
-    QT_NO_CAST_FROM_ASCII
-    QT_NO_CAST_TO_ASCII
-    QT_NO_CAST_FROM_BYTEARRAY
-    QT_NO_NARROWING_CONVERSIONS_IN_CONNECT
-    QT_USE_QSTRINGBUILDER
-    QT_STRICT_ITERATORS
-    $<$<NOT:$<CONFIG:Debug>>:QT_NO_DEBUG_OUTPUT>
-)
-
-if (CMAKE_SYSTEM_NAME STREQUAL "Darwin")
-    target_compile_definitions(qbt_common_cfg INTERFACE
-        _DARWIN_FEATURE_64_BIT_INODE
-    )
-endif()
-
-if (CMAKE_SYSTEM_NAME STREQUAL "Windows")
-    target_compile_definitions(qbt_common_cfg INTERFACE
-        NTDDI_VERSION=0x0A000006
-        _WIN32_WINNT=0x0A00
-        _WIN32_IE=0x0A00
-        WIN32_LEAN_AND_MEAN
-        NOMINMAX
-        UNICODE
-        _UNICODE
-    )
-endif()
-
-if ((CMAKE_CXX_COMPILER_ID STREQUAL "GNU") OR (CMAKE_CXX_COMPILER_ID STREQUAL "Clang") OR (CMAKE_CXX_COMPILER_ID STREQUAL "AppleClang"))
-    target_compile_options(qbt_common_cfg INTERFACE
-        -Wall
-        -Wextra
-        -Wcast-qual
-        -Wcast-align
-        -Winvalid-pch
-        -Woverloaded-virtual
-        -Wold-style-cast
-        -Wnon-virtual-dtor
-        -pedantic
-        -pedantic-errors
-    )
-
-    # Clang 11 still doesn't support -Wstrict-null-sentinel
-    include(CheckCXXCompilerFlag)
-    check_cxx_compiler_flag(-Wstrict-null-sentinel SNS_SUPPORT)
-    if (SNS_SUPPORT)
-        target_compile_options(qbt_common_cfg INTERFACE -Wstrict-null-sentinel)
-    endif()
-endif()
-
-if ((CMAKE_CXX_COMPILER_ID STREQUAL "Clang") OR (CMAKE_CXX_COMPILER_ID STREQUAL "AppleClang"))
-    target_compile_options(qbt_common_cfg INTERFACE
-        -Wno-range-loop-analysis
-    )
-endif()
-
-if (MINGW)
-    target_link_options(qbt_common_cfg INTERFACE $<$<OR:$<CONFIG:Debug>,$<CONFIG:RelWithDebInfo>>:LINKER:--dynamicbase>)
-endif()
-
-if (MSVC)
-    target_compile_options(qbt_common_cfg INTERFACE
-        /guard:cf
-        /permissive-
-        /utf-8
-        # https://devblogs.microsoft.com/cppblog/msvc-now-correctly-reports-__cplusplus/
-        /Zc:__cplusplus
-    )
-    target_link_options(qbt_common_cfg INTERFACE
-        /guard:cf
-        $<$<NOT:$<CONFIG:Debug>>:/OPT:REF /OPT:ICF>
-        # suppress linking warning due to /INCREMENTAL and /OPT:ICF being both ON
-        $<$<CONFIG:RelWithDebInfo>:/INCREMENTAL:NO>
-    )
-
-    if (MSVC_RUNTIME_DYNAMIC)
-        set(CMAKE_MSVC_RUNTIME_LIBRARY "MultiThreaded$<$<CONFIG:Debug>:Debug>DLL")
-    else()
-        set(CMAKE_MSVC_RUNTIME_LIBRARY "MultiThreaded$<$<CONFIG:Debug>:Debug>")
-    endif()
-endif()
-
-if (DBUS)
-    target_compile_definitions(qbt_common_cfg INTERFACE QBT_USES_DBUS)
-endif()
-
-if (LibtorrentRasterbar_VERSION VERSION_GREATER_EQUAL ${minLibtorrentVersion})
-    target_compile_definitions(qbt_common_cfg INTERFACE QBT_USES_LIBTORRENT2)
-endif()

cmake/Modules/DeployQt5.cmake

@@ -0,0 +1,355 @@
+# Borrowed from Avogadro project (https://github.com/OpenChemistry/avogadroapp)
+
+#.rst:
+# DeployQt5
+# ---------
+#
+# Functions to help assemble a standalone Qt5 executable.
+#
+# A collection of CMake utility functions useful for deploying Qt5
+# executables.
+#
+# The following functions are provided by this module:
+#
+# ::
+#
+#    write_qt5_conf
+#    resolve_qt5_paths
+#    fixup_qt5_executable
+#    install_qt5_plugin_path
+#    install_qt5_plugin
+#    install_qt5_executable
+#
+# Requires CMake 2.8.9 or greater because Qt 5 does.
+# Also depends on BundleUtilities.cmake.
+#
+# ::
+#
+#   WRITE_QT5_CONF(<qt_conf_dir> <qt_conf_contents>)
+#
+# Writes a qt.conf file with the <qt_conf_contents> into <qt_conf_dir>.
+#
+# ::
+#
+#   RESOLVE_QT5_PATHS(<paths_var> [<executable_path>])
+#
+# Loop through <paths_var> list and if any don't exist resolve them
+# relative to the <executable_path> (if supplied) or the
+# CMAKE_INSTALL_PREFIX.
+#
+# ::
+#
+#   FIXUP_QT5_EXECUTABLE(<executable> [<qtplugins> <libs> <dirs> <plugins_dir> <request_qt_conf>])
+#
+# Copies Qt plugins, writes a Qt configuration file (if needed) and
+# fixes up a Qt5 executable using BundleUtilities so it is standalone
+# and can be drag-and-drop copied to another machine as long as all of
+# the system libraries are compatible.
+#
+# <executable> should point to the executable to be fixed-up.
+#
+# <qtplugins> should contain a list of the names or paths of any Qt
+# plugins to be installed.
+#
+# <libs> will be passed to BundleUtilities and should be a list of any
+# already installed plugins, libraries or executables to also be
+# fixed-up.
+#
+# <dirs> will be passed to BundleUtilities and should contain and
+# directories to be searched to find library dependencies.
+#
+# <plugins_dir> allows an custom plugins directory to be used.
+#
+# <request_qt_conf> will force a qt.conf file to be written even if not
+# needed.
+#
+# ::
+#
+#   INSTALL_QT5_PLUGIN_PATH(plugin executable copy installed_plugin_path_var <plugins_dir> <component> <configurations>)
+#
+# Install (or copy) a resolved <plugin> to the default plugins directory
+# (or <plugins_dir>) relative to <executable> and store the result in
+# <installed_plugin_path_var>.
+#
+# If <copy> is set to TRUE then the plugins will be copied rather than
+# installed.  This is to allow this module to be used at CMake time
+# rather than install time.
+#
+# If <component> is set then anything installed will use this COMPONENT.
+#
+# ::
+#
+#   INSTALL_QT5_PLUGIN(plugin executable copy installed_plugin_path_var <plugins_dir> <component>)
+#
+# Install (or copy) an unresolved <plugin> to the default plugins
+# directory (or <plugins_dir>) relative to <executable> and store the
+# result in <installed_plugin_path_var>.  See documentation of
+# INSTALL_QT5_PLUGIN_PATH.
+#
+# ::
+#
+#   INSTALL_QT5_EXECUTABLE(<executable> [<qtplugins> <libs> <dirs> <plugins_dir> <request_qt_conf> <component>])
+#
+# Installs Qt plugins, writes a Qt configuration file (if needed) and
+# fixes up a Qt5 executable using BundleUtilities so it is standalone
+# and can be drag-and-drop copied to another machine as long as all of
+# the system libraries are compatible.  The executable will be fixed-up
+# at install time.  <component> is the COMPONENT used for bundle fixup
+# and plugin installation.  See documentation of FIXUP_QT5_BUNDLE.
+
+#=============================================================================
+# Copyright 2011 Mike McQuaid <mike@mikemcquaid.com>
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+# The functions defined in this file depend on the fixup_bundle function
+# (and others) found in BundleUtilities.cmake
+
+include(BundleUtilities)
+set(DeployQt5_cmake_dir "${CMAKE_CURRENT_LIST_DIR}")
+set(DeployQt5_apple_plugins_dir "PlugIns")
+
+function(write_qt5_conf qt_conf_dir qt_conf_contents)
+  set(qt_conf_path "${qt_conf_dir}/qt.conf")
+  message(STATUS "Writing ${qt_conf_path}")
+  file(WRITE "${qt_conf_path}" "${qt_conf_contents}")
+endfunction()
+
+function(resolve_qt5_paths paths_var)
+  set(executable_path ${ARGV1})
+
+  set(paths_resolved)
+  foreach(path ${${paths_var}})
+    if(EXISTS "${path}")
+      list(APPEND paths_resolved "${path}")
+    else()
+      if(${executable_path})
+        list(APPEND paths_resolved "${executable_path}/${path}")
+      else()
+        list(APPEND paths_resolved "\$ENV{DESTDIR}\${CMAKE_INSTALL_PREFIX}/${path}")
+      endif()
+    endif()
+  endforeach()
+  set(${paths_var} ${paths_resolved} PARENT_SCOPE)
+endfunction()
+
+function(fixup_qt5_executable executable)
+  set(qtplugins ${ARGV1})
+  set(libs ${ARGV2})
+  set(dirs ${ARGV3})
+  set(plugins_dir ${ARGV4})
+  set(request_qt_conf ${ARGV5})
+
+  message(STATUS "fixup_qt5_executable")
+  message(STATUS "  executable='${executable}'")
+  message(STATUS "  qtplugins='${qtplugins}'")
+  message(STATUS "  libs='${libs}'")
+  message(STATUS "  dirs='${dirs}'")
+  message(STATUS "  plugins_dir='${plugins_dir}'")
+  message(STATUS "  request_qt_conf='${request_qt_conf}'")
+
+  if(QT_LIBRARY_DIR)
+    list(APPEND dirs "${QT_LIBRARY_DIR}")
+  endif()
+  if(QT_BINARY_DIR)
+    list(APPEND dirs "${QT_BINARY_DIR}")
+  endif()
+
+  if(APPLE)
+    set(qt_conf_dir "${executable}/Contents/Resources")
+    set(executable_path "${executable}")
+    set(write_qt_conf TRUE)
+    if(NOT plugins_dir)
+      set(plugins_dir "${DeployQt5_apple_plugins_dir}")
+    endif()
+  else()
+    get_filename_component(executable_path "${executable}" PATH)
+    if(NOT executable_path)
+      set(executable_path ".")
+    endif()
+    set(qt_conf_dir "${executable_path}")
+    set(write_qt_conf ${request_qt_conf})
+  endif()
+
+  foreach(plugin ${qtplugins})
+    set(installed_plugin_path "")
+    install_qt5_plugin("${plugin}" "${executable}" 1 installed_plugin_path)
+    list(APPEND libs ${installed_plugin_path})
+  endforeach()
+
+  foreach(lib ${libs})
+    if(NOT EXISTS "${lib}")
+      message(FATAL_ERROR "Library does not exist: ${lib}")
+    endif()
+  endforeach()
+
+  resolve_qt5_paths(libs "${executable_path}")
+
+  if(write_qt_conf)
+    set(qt_conf_contents "[Paths]\nPlugins = ${plugins_dir}")
+    write_qt5_conf("${qt_conf_dir}" "${qt_conf_contents}")
+  endif()
+
+  fixup_bundle("${executable}" "${libs}" "${dirs}")
+endfunction()
+
+function(install_qt5_plugin_path plugin executable copy installed_plugin_path_var)
+  set(plugins_dir ${ARGV4})
+  set(component ${ARGV5})
+  set(configurations ${ARGV6})
+  if(EXISTS "${plugin}")
+    if(APPLE)
+      if(NOT plugins_dir)
+        set(plugins_dir "${DeployQt5_apple_plugins_dir}")
+      endif()
+      set(plugins_path "${executable}/Contents/${plugins_dir}")
+    else()
+      get_filename_component(plugins_path "${executable}" PATH)
+      if(NOT plugins_path)
+        set(plugins_path ".")
+      endif()
+      if(plugins_dir)
+        set(plugins_path "${plugins_path}/${plugins_dir}")
+      endif()
+    endif()
+
+    set(plugin_group "")
+
+    get_filename_component(plugin_path "${plugin}" PATH)
+    get_filename_component(plugin_parent_path "${plugin_path}" PATH)
+    get_filename_component(plugin_parent_dir_name "${plugin_parent_path}" NAME)
+    get_filename_component(plugin_name "${plugin}" NAME)
+    string(TOLOWER "${plugin_parent_dir_name}" plugin_parent_dir_name)
+
+    if("${plugin_parent_dir_name}" STREQUAL "plugins")
+      get_filename_component(plugin_group "${plugin_path}" NAME)
+      set(${plugin_group_var} "${plugin_group}")
+    endif()
+    set(plugins_path "${plugins_path}/${plugin_group}")
+
+    if(${copy})
+      file(MAKE_DIRECTORY "${plugins_path}")
+      file(COPY "${plugin}" DESTINATION "${plugins_path}")
+    else()
+      if(configurations AND (CMAKE_CONFIGURATION_TYPES OR CMAKE_BUILD_TYPE))
+        set(configurations CONFIGURATIONS ${configurations})
+      else()
+        unset(configurations)
+      endif()
+      install(FILES "${plugin}" DESTINATION "${plugins_path}" ${configurations} ${component})
+    endif()
+    set(${installed_plugin_path_var} "${plugins_path}/${plugin_name}" PARENT_SCOPE)
+  endif()
+endfunction()
+
+function(install_qt5_plugin plugin executable copy installed_plugin_path_var)
+  set(plugins_dir ${ARGV4})
+  set(component ${ARGV5})
+  if(EXISTS "${plugin}")
+    install_qt5_plugin_path("${plugin}" "${executable}" "${copy}" "${installed_plugin_path_var}" "${plugins_dir}" "${component}")
+  else()
+    string(TOUPPER "QT_${plugin}_PLUGIN" plugin_var)
+    set(plugin_release_var "${plugin_var}_RELEASE")
+    set(plugin_debug_var "${plugin_var}_DEBUG")
+    set(plugin_release "${${plugin_release_var}}")
+    set(plugin_debug "${${plugin_debug_var}}")
+    if(DEFINED "${plugin_release_var}" AND DEFINED "${plugin_debug_var}" AND NOT EXISTS "${plugin_release}" AND NOT EXISTS "${plugin_debug}")
+      message(WARNING "Qt plugin \"${plugin}\" not recognized or found.")
+    endif()
+    if(NOT EXISTS "${${plugin_debug_var}}")
+      set(plugin_debug "${plugin_release}")
+    endif()
+
+    if(CMAKE_CONFIGURATION_TYPES OR CMAKE_BUILD_TYPE)
+      install_qt5_plugin_path("${plugin_release}" "${executable}" "${copy}" "${installed_plugin_path_var}_release" "${plugins_dir}" "${component}" "Release|RelWithDebInfo|MinSizeRel")
+      install_qt5_plugin_path("${plugin_debug}" "${executable}" "${copy}" "${installed_plugin_path_var}_debug" "${plugins_dir}" "${component}" "Debug")
+
+      if(CMAKE_BUILD_TYPE MATCHES "^Debug$")
+        set(${installed_plugin_path_var} ${${installed_plugin_path_var}_debug})
+      else()
+        set(${installed_plugin_path_var} ${${installed_plugin_path_var}_release})
+      endif()
+    else()
+      install_qt5_plugin_path("${plugin_release}" "${executable}" "${copy}" "${installed_plugin_path_var}" "${plugins_dir}" "${component}")
+    endif()
+  endif()
+  set(${installed_plugin_path_var} ${${installed_plugin_path_var}} PARENT_SCOPE)
+endfunction()
+
+function(install_qt5_executable executable)
+  set(qtplugins ${ARGV1})
+  set(libs ${ARGV2})
+  set(dirs ${ARGV3})
+  set(plugins_dir ${ARGV4})
+  set(request_qt_conf ${ARGV5})
+  set(component ${ARGV6})
+  if(QT_LIBRARY_DIR)
+    list(APPEND dirs "${QT_LIBRARY_DIR}")
+  endif()
+  if(QT_BINARY_DIR)
+    list(APPEND dirs "${QT_BINARY_DIR}")
+  endif()
+  if(TARGET Qt5::Core)
+    get_property(_locCore TARGET Qt5::Core PROPERTY LOCATION_RELEASE)
+    get_filename_component(_loc ${_locCore} DIRECTORY)
+    message(STATUS "Adding Qt 5 directory: ${_loc}")
+    list(APPEND dirs "${_loc}")
+  else()
+    message(FATAL_ERROR "No Qt5::Core target found, ensure it is available")
+  endif()
+  if(component)
+    set(component COMPONENT ${component})
+  else()
+    unset(component)
+  endif()
+
+  get_filename_component(executable_absolute "${executable}" ABSOLUTE)
+  if(EXISTS "${QT_QTCORE_LIBRARY_RELEASE}")
+    gp_file_type("${executable_absolute}" "${QT_QTCORE_LIBRARY_RELEASE}" qtcore_type)
+  elseif(EXISTS "${QT_QTCORE_LIBRARY_DEBUG}")
+    gp_file_type("${executable_absolute}" "${QT_QTCORE_LIBRARY_DEBUG}" qtcore_type)
+  endif()
+  if(qtcore_type STREQUAL "system")
+    set(qt_plugins_dir "")
+  endif()
+
+  if(QT_IS_STATIC)
+    message(WARNING "Qt built statically: not installing plugins.")
+  else()
+    if(APPLE)
+      get_property(loc TARGET Qt5::QCocoaIntegrationPlugin
+        PROPERTY LOCATION_RELEASE)
+      install_qt5_plugin("${loc}" "${executable}" 0 installed_plugin_paths
+        "PlugIns" "${component}")
+      list(APPEND libs ${installed_plugin_paths})
+    elseif(WIN32)
+      get_property(loc TARGET Qt5::QWindowsIntegrationPlugin
+        PROPERTY LOCATION_RELEASE)
+      install_qt5_plugin("${loc}" "${executable}" 0 installed_plugin_paths
+        "" "${component}")
+      list(APPEND libs ${installed_plugin_paths})
+    endif()
+    foreach(plugin ${qtplugins})
+      set(installed_plugin_paths "")
+      install_qt5_plugin("${plugin}" "${executable}" 0 installed_plugin_paths "${plugins_dir}" "${component}")
+      list(APPEND libs ${installed_plugin_paths})
+    endforeach()
+  endif()
+
+  resolve_qt5_paths(libs "")
+
+  install(CODE
+  "include(\"${DeployQt5_cmake_dir}/DeployQt5.cmake\")
+  set(BU_CHMOD_BUNDLE_ITEMS TRUE)
+  fixup_qt5_executable(\"\$ENV{DESTDIR}\${CMAKE_INSTALL_PREFIX}/${executable}\" \"\" \"${libs}\" \"${dirs}\" \"${plugins_dir}\" \"${request_qt_conf}\")"
+    ${component}
+    )
+endfunction()

cmake/Modules/FeatureOptionsSetup.cmake

@@ -1,14 +0,0 @@
-# Helper functions for coupling add_feature_info() or CMAKE_DEPENDENT_OPTION() and option()
-
-function(feature_option _name _description _default)
-    string(CONCAT _desc "${_description} (default: ${_default})")
-    option("${_name}" "${_desc}" "${_default}")
-    add_feature_info("${_name}" "${_name}" "${_desc}")
-endfunction()
-
-include(CMakeDependentOption)
-function(feature_option_dependent _name _description _default_opt _dependency _default_dep_not_sat)
-    string(CONCAT _desc "${_description} (default: ${_default_opt}; depends on condition: ${_dependency})")
-    CMAKE_DEPENDENT_OPTION("${_name}" "${_desc}" "${_default_opt}" "${_dependency}" "${_default_dep_not_sat}")
-    add_feature_info("${_name}" "${_name}" "${_desc}")
-endfunction()

cmake/Modules/FindLibtorrentRasterbar.cmake

@@ -0,0 +1,127 @@
+# - Try to find libtorrent-rasterbar
+#
+# If not using pkg-config, you can pre-set LibtorrentRasterbar_CUSTOM_DEFINITIONS
+# for definitions unrelated to Boost's separate compilation (which are already
+# decided by the LibtorrentRasterbar_USE_STATIC_LIBS variable).
+#
+# Once done this will define
+#  LibtorrentRasterbar_FOUND - System has libtorrent-rasterbar
+#  LibtorrentRasterbar_INCLUDE_DIRS - The libtorrent-rasterbar include directories
+#  LibtorrentRasterbar_LIBRARIES - The libraries needed to use libtorrent-rasterbar
+#  LibtorrentRasterbar_DEFINITIONS - Compiler switches required for using libtorrent-rasterbar
+#  LibtorrentRasterbar_OPENSSL_ENABLED - libtorrent-rasterbar uses and links against OpenSSL
+
+find_package(Threads REQUIRED)
+find_package(PkgConfig QUIET)
+
+macro(_detect_boost_components _outComponets librariesList)
+    string(REGEX MATCHALL "boost_[a-z_]+[-a-z]*" _boost_libraries "${librariesList}")
+    string(REGEX REPLACE "boost_([a-z_]+)[-a-z]*" "\\1" ${_outComponets} "${_boost_libraries}")
+endmacro()
+
+if(PKG_CONFIG_FOUND)
+    pkg_check_modules(PC_LIBTORRENT_RASTERBAR QUIET libtorrent-rasterbar)
+endif()
+
+if(LibtorrentRasterbar_USE_STATIC_LIBS)
+    set(LibtorrentRasterbar_ORIG_CMAKE_FIND_LIBRARY_SUFFIXES ${CMAKE_FIND_LIBRARY_SUFFIXES})
+    set(CMAKE_FIND_LIBRARY_SUFFIXES ${CMAKE_STATIC_LIBRARY_SUFFIX})
+endif()
+
+if(PC_LIBTORRENT_RASTERBAR_FOUND)
+    set(LibtorrentRasterbar_DEFINITIONS ${PC_LIBTORRENT_RASTERBAR_CFLAGS})
+else()
+    if(LibtorrentRasterbar_CUSTOM_DEFINITIONS)
+        set(LibtorrentRasterbar_DEFINITIONS ${LibtorrentRasterbar_CUSTOM_DEFINITIONS})
+    else()
+        # Without pkg-config, we can't possibly figure out the correct build flags.
+        # libtorrent is very picky about those. Let's take a set of defaults and
+        # hope that they apply. If not, you the user are on your own.
+        set(LibtorrentRasterbar_DEFINITIONS
+            -DTORRENT_USE_OPENSSL
+            -DTORRENT_DISABLE_GEO_IP
+            -DBOOST_ASIO_ENABLE_CANCELIO
+            -DUNICODE -D_UNICODE -D_FILE_OFFSET_BITS=64)
+    endif()
+
+    if(NOT LibtorrentRasterbar_USE_STATIC_LIBS)
+        list(APPEND LibtorrentRasterbar_DEFINITIONS
+            -DTORRENT_LINKING_SHARED
+            -DBOOST_SYSTEM_DYN_LINK -DBOOST_CHRONO_DYN_LINK)
+    endif()
+endif()
+
+message(STATUS "libtorrent definitions: ${LibtorrentRasterbar_DEFINITIONS}")
+
+find_path(LibtorrentRasterbar_INCLUDE_DIR libtorrent
+          HINTS ${PC_LIBTORRENT_RASTERBAR_INCLUDEDIR} ${PC_LIBTORRENT_RASTERBAR_INCLUDE_DIRS}
+          PATH_SUFFIXES libtorrent-rasterbar)
+
+find_library(LibtorrentRasterbar_LIBRARY NAMES torrent-rasterbar libtorrent
+             HINTS ${PC_LIBTORRENT_RASTERBAR_LIBDIR} ${PC_LIBTORRENT_RASTERBAR_LIBRARY_DIRS})
+
+if(LibtorrentRasterbar_USE_STATIC_LIBS)
+    set(CMAKE_FIND_LIBRARY_SUFFIXES ${LibtorrentRasterbar_ORIG_CMAKE_FIND_LIBRARY_SUFFIXES})
+endif()
+
+set(LibtorrentRasterbar_LIBRARIES ${LibtorrentRasterbar_LIBRARY} ${CMAKE_THREAD_LIBS_INIT})
+set(LibtorrentRasterbar_INCLUDE_DIRS ${LibtorrentRasterbar_INCLUDE_DIR})
+
+# Without pkg-config, we can't possibly figure out the correct boost dependencies
+if (LibtorrentRasterbar_CUSTOM_BOOST_DEPENDENCIES)
+    set(_boost_components "${LibtorrentRasterbar_CUSTOM_BOOST_DEPENDENCIES}")
+else(LibtorrentRasterbar_CUSTOM_BOOST_DEPENDENCIES)
+    if(PC_LIBTORRENT_RASTERBAR_FOUND)
+        _detect_boost_components(_boost_components "${PC_LIBTORRENT_RASTERBAR_LIBRARIES}")
+    else()
+        # all possible boost dependencies
+        set(_boost_components
+            date_time
+            system
+            chrono
+            random
+            thread
+        )
+    endif()
+endif(LibtorrentRasterbar_CUSTOM_BOOST_DEPENDENCIES)
+
+list(SORT _boost_components)
+message(STATUS "Libtorrent Boost dependencies: ${_boost_components}")
+find_package(Boost REQUIRED COMPONENTS ${_boost_components})
+set(LibtorrentRasterbar_LIBRARIES ${LibtorrentRasterbar_LIBRARIES} ${CMAKE_THREAD_LIBS_INIT})
+foreach(_boost_cmpnt IN LISTS _boost_components)
+    list(APPEND LibtorrentRasterbar_LIBRARIES "Boost::${_boost_cmpnt}")
+endforeach(_boost_cmpnt)
+
+set(LibtorrentRasterbar_INCLUDE_DIRS ${LibtorrentRasterbar_INCLUDE_DIRS})
+
+list(FIND LibtorrentRasterbar_DEFINITIONS -DTORRENT_USE_OPENSSL LibtorrentRasterbar_ENCRYPTION_INDEX)
+if(LibtorrentRasterbar_ENCRYPTION_INDEX GREATER -1)
+    find_package(OpenSSL REQUIRED)
+    set(LibtorrentRasterbar_LIBRARIES ${LibtorrentRasterbar_LIBRARIES} OpenSSL::SSL OpenSSL::Crypto)
+    set(LibtorrentRasterbar_OPENSSL_ENABLED ON)
+endif()
+
+include(FindPackageHandleStandardArgs)
+# handle the QUIETLY and REQUIRED arguments and set LibtorrentRasterbar_FOUND to TRUE
+# if all listed variables are TRUE
+find_package_handle_standard_args(LibtorrentRasterbar DEFAULT_MSG
+                                  LibtorrentRasterbar_LIBRARY
+                                  LibtorrentRasterbar_INCLUDE_DIR)
+
+mark_as_advanced(LibtorrentRasterbar_INCLUDE_DIR LibtorrentRasterbar_LIBRARY
+    LibtorrentRasterbar_ORIG_CMAKE_FIND_LIBRARY_SUFFIXES
+    LibtorrentRasterbar_ENCRYPTION_INDEX)
+
+if (LibtorrentRasterbar_FOUND AND NOT TARGET LibtorrentRasterbar::LibTorrent)
+    add_library(LibtorrentRasterbar::LibTorrent UNKNOWN IMPORTED)
+
+    set_target_properties(LibtorrentRasterbar::LibTorrent PROPERTIES
+        IMPORTED_LINK_INTERFACE_LANGUAGES "CXX"
+        IMPORTED_LOCATION "${LibtorrentRasterbar_LIBRARY}"
+        INTERFACE_INCLUDE_DIRECTORIES "${LibtorrentRasterbar_INCLUDE_DIRS}"
+        INTERFACE_SYSTEM_INCLUDE_DIRECTORIES "${LibtorrentRasterbar_INCLUDE_DIRS}"
+        INTERFACE_LINK_LIBRARIES "${LibtorrentRasterbar_LIBRARIES}"
+        INTERFACE_COMPILE_OPTIONS "${LibtorrentRasterbar_DEFINITIONS}"
+    )
+endif()

cmake/Modules/FindQtSingleApplication.cmake

@@ -0,0 +1,94 @@
+# - Try to find the QtSingleApplication includes and library
+# which defines
+#
+# QTSINGLEAPPLICATION_FOUND - system has QtSingleApplication
+# QTSINGLEAPPLICATION_INCLUDE_DIR - where to find header QtSingleApplication
+# QTSINGLEAPPLICATION_LIBRARIES - the libraries to link against to use QtSingleApplication
+# QTSINGLEAPPLICATION_LIBRARY - where to find the QtSingleApplication library (not for general use)
+
+# copyright (c) 2013 TI_Eugene ti.eugene@gmail.com
+#
+# Redistribution and use is allowed according to the terms of the FreeBSD license.
+
+SET(QTSINGLEAPPLICATION_FOUND FALSE)
+
+IF(QT4_FOUND)
+    message(STATUS "Looking for Qt4 single application library")
+    FIND_PATH(QTSINGLEAPPLICATION_INCLUDE_DIR QtSingleApplication
+                # standard locations
+                /usr/include
+                /usr/include/QtSolutions
+                # qt4 location except mac's frameworks
+                "${QT_INCLUDE_DIR}/QtSolutions"
+                # mac's frameworks
+                ${FRAMEWORK_INCLUDE_DIR}/QtSolutions
+    )
+
+    SET(QTSINGLEAPPLICATION_NAMES ${QTSINGLEAPPLICATION_NAMES}
+        QtSolutions_SingleApplication-2.6 libQtSolutions_SingleApplication-2.6)
+    FIND_LIBRARY(QTSINGLEAPPLICATION_LIBRARY
+        NAMES ${QTSINGLEAPPLICATION_NAMES}
+        PATHS ${QT_LIBRARY_DIR}
+    )
+ELSEIF(Qt5Core_FOUND)
+    message(STATUS "Looking for Qt5 single application library")
+    FOREACH(TOP_INCLUDE_PATH in ${Qt5Core_INCLUDE_DIRS} ${FRAMEWORK_INCLUDE_DIR})
+        FIND_PATH(QTSINGLEAPPLICATION_INCLUDE_DIR QtSingleApplication ${TOP_INCLUDE_PATH}/QtSolutions)
+
+        IF(QTSINGLEAPPLICATION_INCLUDE_DIR)
+            BREAK()
+        ENDIF()
+    ENDFOREACH()
+
+    SET(QTSINGLEAPPLICATION_NAMES ${QTSINGLEAPPLICATION_NAMES}
+        Qt5Solutions_SingleApplication-2.6 libQt5Solutions_SingleApplication-2.6
+        QtSolutions_SingleApplication-2.6 libQtSolutions_SingleApplication-2.6)
+    GET_TARGET_PROPERTY(_QT5_CORELIBRARY Qt5::Core LOCATION)
+    GET_FILENAME_COMPONENT(_QT5_CORELIBRARYPATH ${_QT5_CORELIBRARY} PATH)
+
+    FIND_LIBRARY(QTSINGLEAPPLICATION_LIBRARY
+        NAMES ${QTSINGLEAPPLICATION_NAMES}
+        PATHS ${_QT5_CORELIBRARYPATH}
+    )
+ENDIF()
+
+IF (QTSINGLEAPPLICATION_LIBRARY AND QTSINGLEAPPLICATION_INCLUDE_DIR)
+
+    SET(QTSINGLEAPPLICATION_LIBRARIES ${QTSINGLEAPPLICATION_LIBRARY})
+    SET(QTSINGLEAPPLICATION_FOUND TRUE)
+
+    IF (CYGWIN)
+        IF(BUILD_SHARED_LIBS)
+        # No need to define QTSINGLEAPPLICATION_USE_DLL here, because it's default for Cygwin.
+        ELSE(BUILD_SHARED_LIBS)
+        SET (QTSINGLEAPPLICATION_DEFINITIONS -DQTSINGLEAPPLICATION_STATIC)
+        ENDIF(BUILD_SHARED_LIBS)
+    ENDIF (CYGWIN)
+
+ENDIF (QTSINGLEAPPLICATION_LIBRARY AND QTSINGLEAPPLICATION_INCLUDE_DIR)
+
+IF (QTSINGLEAPPLICATION_FOUND)
+  IF (NOT QtSingleApplication_FIND_QUIETLY)
+    MESSAGE(STATUS "Found QtSingleApplication: ${QTSINGLEAPPLICATION_LIBRARY}")
+    MESSAGE(STATUS "         includes: ${QTSINGLEAPPLICATION_INCLUDE_DIR}")
+  ENDIF (NOT QtSingleApplication_FIND_QUIETLY)
+ELSE (QTSINGLEAPPLICATION_FOUND)
+  IF (QtSingleApplication_FIND_REQUIRED)
+    MESSAGE(FATAL_ERROR "Could not find QtSingleApplication library")
+  ENDIF (QtSingleApplication_FIND_REQUIRED)
+ENDIF (QTSINGLEAPPLICATION_FOUND)
+
+MARK_AS_ADVANCED(QTSINGLEAPPLICATION_INCLUDE_DIR QTSINGLEAPPLICATION_LIBRARY)
+
+if(NOT TARGET QtSingleApplication::QtSingleApplication)
+    add_library(QtSingleApplication::QtSingleApplication UNKNOWN IMPORTED)
+    set_target_properties(QtSingleApplication::QtSingleApplication PROPERTIES
+        INTERFACE_INCLUDE_DIRECTORIES "${QTSINGLEAPPLICATION_INCLUDE_DIR}"
+        INTERFACE_SYSTEM_INCLUDE_DIRECTORIES "${QTSINGLEAPPLICATION_INCLUDE_DIR}"
+    )
+    if(EXISTS "${QTSINGLEAPPLICATION_LIBRARY}")
+    set_target_properties(QtSingleApplication::QtSingleApplication PROPERTIES
+        IMPORTED_LINK_INTERFACE_LANGUAGES "CXX"
+        IMPORTED_LOCATION "${QTSINGLEAPPLICATION_LIBRARY}")
+    endif()
+endif(NOT TARGET QtSingleApplication::QtSingleApplication)

cmake/Modules/FindQtTranslations.cmake

@@ -1,25 +0,0 @@
-# Return Qt translations files as list of paths
-# It will return .qm files of qt/qtbase that aren't stub files.
-# Requires that Qt has been found first because it depends on qmake being available
-
-function(qbt_get_qt_translations qt_translations)
-    get_target_property(QT_QMAKE_EXECUTABLE Qt::qmake IMPORTED_LOCATION)
-    execute_process(COMMAND "${QT_QMAKE_EXECUTABLE}" -query QT_INSTALL_TRANSLATIONS
-                    OUTPUT_VARIABLE QT_TRANSLATIONS_DIR OUTPUT_STRIP_TRAILING_WHITESPACE)
-
-    FILE(GLOB QT_TEMP_TRANSLATIONS CONFIGURE_DEPENDS
-        "${QT_TRANSLATIONS_DIR}/qt_??.qm"
-        "${QT_TRANSLATIONS_DIR}/qt_??_??.qm"
-        "${QT_TRANSLATIONS_DIR}/qtbase_??.qm"
-        "${QT_TRANSLATIONS_DIR}/qtbase_??_??.qm")
-
-    foreach(TRANSLATION ${QT_TEMP_TRANSLATIONS})
-        FILE(SIZE "${TRANSLATION}" translation_size)
-        # Consider files less than 10KB as stub translations
-        if (translation_size GREATER_EQUAL 10240)
-            list(APPEND QT_FINAL_TRANSLATIONS "${TRANSLATION}")
-        endif()
-    endforeach()
-
-    SET(${qt_translations} ${QT_FINAL_TRANSLATIONS} PARENT_SCOPE)
-endfunction()

cmake/Modules/FindSystemd.cmake

@@ -8,7 +8,7 @@ find_package(PkgConfig QUIET REQUIRED)
 
 if (NOT SYSTEMD_FOUND)
     pkg_check_modules(SYSTEMD "systemd")
-endif()
+endif(NOT SYSTEMD_FOUND)
 
 if (SYSTEMD_FOUND AND "${SYSTEMD_SERVICES_INSTALL_DIR}" STREQUAL "")
     execute_process(COMMAND ${PKG_CONFIG_EXECUTABLE}
@@ -23,4 +23,4 @@ endif()
 
 if (SYSTEMD_FOUND)
     message(STATUS "systemd services install dir: ${SYSTEMD_SERVICES_INSTALL_DIR}")
-endif()
+endif(SYSTEMD_FOUND)

cmake/Modules/FunctionReadVersion.cmake

@@ -0,0 +1,28 @@
+# function for parsing version variables that are set in version.pri file
+# the version identifiers there are defined as follows:
+# VER_MAJOR = 3
+# VER_MINOR = 4
+# VER_BUGFIX = 0
+# VER_BUILD = 0
+# VER_STATUS = alpha
+
+function(read_version priFile outMajor outMinor outBugfix outBuild outStatus)
+    file(STRINGS ${priFile} _priFileContents REGEX "^VER_.+")
+    # message(STATUS "version.pri version contents: ${_priFileContents}")
+    # the _priFileContents variable contains something like the following:
+    # VER_MAJOR = 3;VER_MINOR = 4;VER_BUGFIX = 0;VER_BUILD = 0;VER_STATUS = alpha # Should be empty for stable releases!
+    set(_regex "VER_MAJOR += +([0-9]+);VER_MINOR += +([0-9]+);VER_BUGFIX += +([0-9]+);VER_BUILD += +([0-9]+);VER_STATUS += +([0-9A-Za-z]+)?")
+     # note quotes around _regex, they are needed because the variable contains semicolons
+    string(REGEX MATCH "${_regex}" _tmp "${_priFileContents}")
+    if (NOT _tmp)
+        message(FATAL_ERROR "Could not detect project version number from ${priFile}")
+    endif()
+
+    # message(STATUS "Matched version string: ${_tmp}")
+
+    set(${outMajor} ${CMAKE_MATCH_1} PARENT_SCOPE)
+    set(${outMinor} ${CMAKE_MATCH_2} PARENT_SCOPE)
+    set(${outBugfix} ${CMAKE_MATCH_3} PARENT_SCOPE)
+    set(${outBuild} ${CMAKE_MATCH_4} PARENT_SCOPE)
+    set(${outStatus} ${CMAKE_MATCH_5} PARENT_SCOPE)
+endfunction()

cmake/Modules/MacroConfigureMSVCRuntime.cmake

@@ -0,0 +1,38 @@
+macro(configure_msvc_runtime)
+    if(MSVC)
+        # Default to statically-linked runtime.
+        if("${MSVC_RUNTIME}" STREQUAL "")
+            set(MSVC_RUNTIME "static")
+        endif()
+        # Set compiler options.
+        set(variables
+            CMAKE_C_FLAGS_DEBUG
+            CMAKE_C_FLAGS_MINSIZEREL
+            CMAKE_C_FLAGS_RELEASE
+            CMAKE_C_FLAGS_RELWITHDEBINFO
+            CMAKE_CXX_FLAGS_DEBUG
+            CMAKE_CXX_FLAGS_MINSIZEREL
+            CMAKE_CXX_FLAGS_RELEASE
+            CMAKE_CXX_FLAGS_RELWITHDEBINFO
+        )
+        if(${MSVC_RUNTIME} STREQUAL "static")
+            message(STATUS
+                "MSVC -> forcing use of statically-linked runtime."
+            )
+            foreach(variable ${variables})
+                if(${variable} MATCHES "/MD")
+                    string(REGEX REPLACE "/MD" "/MT" ${variable} "${${variable}}")
+                endif()
+            endforeach()
+        else()
+            message(STATUS
+                "MSVC -> forcing use of dynamically-linked runtime."
+            )
+            foreach(variable ${variables})
+                if(${variable} MATCHES "/MT")
+                    string(REGEX REPLACE "/MT" "/MD" ${variable} "${${variable}}")
+                endif()
+            endforeach()
+        endif()
+    endif()
+endmacro()

cmake/Modules/MacroGlibcDetect.cmake

@@ -0,0 +1,49 @@
+ ###############################################################
+ #
+ # Copyright 2011 Red Hat, Inc.
+ #
+ # Licensed under the Apache License, Version 2.0 (the "License"); you
+ # may not use this file except in compliance with the License.  You may
+ # obtain a copy of the License at
+ #
+ #    http://www.apache.org/licenses/LICENSE-2.0
+ #
+ # Unless required by applicable law or agreed to in writing, software
+ # distributed under the License is distributed on an "AS IS" BASIS,
+ # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ # See the License for the specific language governing permissions and
+ # limitations under the License.
+ #
+ ###############################################################
+
+MACRO (GLIBC_DETECT _VERSION)
+
+# there are multiple ways to detect glibc, but given nmi's
+# cons'd up paths I will trust only gcc.  I guess I could also use
+# ldd --version to detect.
+
+    set(_GLIB_SOURCE_DETECT "
+#include <limits.h>
+#include <stdio.h>
+int main()
+{
+  printf(\"%d%d\",__GLIBC__, __GLIBC_MINOR__);
+  return 0;
+}
+")
+
+file (WRITE ${CMAKE_CURRENT_BINARY_DIR}/build/cmake/glibc.cpp "${_GLIB_SOURCE_DETECT}\n")
+
+try_run(POST26_GLIBC_DETECTED
+        POST26_GLIBC_COMPILE
+        ${CMAKE_CURRENT_BINARY_DIR}/build/cmake
+        ${CMAKE_CURRENT_BINARY_DIR}/build/cmake/glibc.cpp
+        RUN_OUTPUT_VARIABLE GLIBC_VERSION )
+
+if (GLIBC_VERSION AND POST26_GLIBC_COMPILE )
+    set(${_VERSION} ${GLIBC_VERSION})
+else()
+    message(STATUS "NOTE: Could not detect GLIBC_VERSION from compiler")
+endif()
+
+ENDMACRO (GLIBC_DETECT)

cmake/Modules/MacroLinkQtComponents.cmake

@@ -0,0 +1,28 @@
+# - macro similar to target_link_libraries, which links Qt components
+# names of the components are pased in Qt4/Qt5 agnostic way (Core, DBus, Xml...)
+# and the macro links Qt4 ones if QT4_FOUND is set or Qt5 ones if not
+
+macro (target_link_qt_components target)
+if (QT4_FOUND)
+    foreach(_cmp ${ARGN})
+        if ("${_cmp}" STREQUAL "PRIVATE" OR
+            "${_cmp}" STREQUAL "PUBLIC" OR
+            "${_cmp}" STREQUAL "INTERFACE")
+             list(APPEND _QT_CMPNTS "${_cmp}")
+        else()
+            list(APPEND _QT_CMPNTS "Qt4::Qt${_cmp}")
+        endif()
+    endforeach()
+else (QT4_FOUND)
+    foreach(_cmp ${ARGN})
+        if ("${_cmp}" STREQUAL "PRIVATE" OR
+            "${_cmp}" STREQUAL "PUBLIC" OR
+            "${_cmp}" STREQUAL "INTERFACE")
+             list(APPEND _QT_CMPNTS "${_cmp}")
+        else()
+            list(APPEND _QT_CMPNTS "Qt5::${_cmp}")
+        endif()
+    endforeach()
+endif (QT4_FOUND)
+    target_link_libraries(${target} ${_QT_CMPNTS})
+endmacro()

cmake/Modules/MacroQbtCompilerSettings.cmake

@@ -0,0 +1,89 @@
+# Sets cache variable QBT_ADDITONAL_FLAGS and QBT_ADDITONAL_CXX_FLAGS to list of additional
+# compiler flags for C and C++ (QBT_ADDITONAL_FLAGS) and for C++ only (QBT_ADDITONAL_CXX_FLAGS)
+# and appends them to CMAKE_XXX_FLAGS variables.
+
+# It could use add_compile_options(), but then it is needed to use generator expressions,
+# and most interesting of them are not compatible with Visual Studio :(
+
+macro(qbt_set_compiler_options)
+# if (NOT QBT_ADDITONAL_FLAGS)
+    if("${CMAKE_CXX_COMPILER_ID}" STREQUAL "GNU" OR "${CMAKE_CXX_COMPILER_ID}" STREQUAL "Clang")
+        #-Wshadow -Wconversion ?
+        set(_GCC_COMMON_C_AND_CXX_FLAGS "-Wall -Wextra"
+            "-Wfloat-equal -Wcast-qual -Wcast-align"
+            "-Wsign-conversion -Winvalid-pch -Werror=return-type -Wno-long-long"
+#			-fstack-protector-all
+            "-Werror -Wno-error=deprecated-declarations"
+        )
+        set (_GCC_COMMON_CXX_FLAGS  "-fexceptions -frtti"
+            "-Woverloaded-virtual -Wold-style-cast -Wstrict-null-sentinel"
+            "-Wnon-virtual-dtor -Wfloat-equal -Wcast-qual -Wcast-align"
+            "-Werror=overloaded-virtual"
+    # 		"-Weffc++"
+            "-Werror -Wno-error=cpp"
+            # we should modify code to make these ones obsolete
+            "-Wno-error=sign-conversion -Wno-error=float-equal"
+        )
+
+        if ("${CMAKE_CXX_COMPILER_ID}" STREQUAL "GNU" AND CMAKE_CXX_COMPILER_VERSION VERSION_LESS 4.9)
+            # GCC 4.8 has problems with std::array and its initialization
+            list(APPEND _GCC_COMMON_CXX_FLAGS "-Wno-error=missing-field-initializers")
+        endif()
+
+        include(CheckCXXCompilerFlag)
+        # check for -pedantic
+        check_cxx_compiler_flag(-pedantic _PEDANTIC_IS_SUPPORTED)
+        if (_PEDANTIC_IS_SUPPORTED)
+            list(APPEND _GCC_COMMON_CXX_FLAGS "-pedantic -pedantic-errors")
+        else (_PEDANTIC_IS_SUPPORTED)
+            list(APPEND _GCC_COMMON_CXX_FLAGS "-Wpedantic")
+        endif (_PEDANTIC_IS_SUPPORTED)
+
+        if (CMAKE_SYSTEM_NAME MATCHES Linux)
+            # if Glibc version is 2.20 or higher, set -D_DEFAULT_SOURCE
+            include(MacroGlibcDetect)
+            message(STATUS "Detecting Glibc version...")
+            glibc_detect(GLIBC_VERSION)
+            if(${GLIBC_VERSION})
+                if(GLIBC_VERSION LESS "220")
+                    message(STATUS "Glibc version is ${GLIBC_VERSION}")
+                else(GLIBC_VERSION LESS "220")
+                    message(STATUS "Glibc version is ${GLIBC_VERSION}, adding -D_DEFAULT_SOURCE")
+                    add_definitions(-D_DEFAULT_SOURCE)
+                endif(GLIBC_VERSION LESS "220")
+            endif(${GLIBC_VERSION})
+        endif (CMAKE_SYSTEM_NAME MATCHES Linux)
+
+        string(REPLACE ";" " " _GCC_COMMON_C_AND_CXX_FLAGS_STRING "${_GCC_COMMON_C_AND_CXX_FLAGS}")
+        string(REPLACE ";" " " _GCC_COMMON_CXX_FLAGS_STRING "${_GCC_COMMON_CXX_FLAGS}")
+
+        string(APPEND CMAKE_C_FLAGS " ${_GCC_COMMON_C_AND_CXX_FLAGS_STRING}")
+        string(APPEND CMAKE_CXX_FLAGS " ${_GCC_COMMON_C_AND_CXX_FLAGS_STRING} ${_GCC_COMMON_CXX_FLAGS_STRING}")
+
+        set(QBT_ADDITONAL_FLAGS "${_GCC_COMMON_C_AND_CXX_FLAGS_STRING}" CACHE STRING
+            "Additional qBittorent compile flags" FORCE)
+        set(QBT_ADDITONAL_CXX_FLAGS "${_GCC_COMMON_CXX_FLAGS_STRING}" CACHE STRING
+            "Additional qBittorent C++ compile flags" FORCE)
+
+        # check whether we can enable -Og optimization for debug build
+        # also let's enable -march=native for debug builds
+        check_cxx_compiler_flag(-Og _DEBUG_OPTIMIZATION_LEVEL_IS_SUPPORTED)
+
+        if (_DEBUG_OPTIMIZATION_LEVEL_IS_SUPPORTED)
+            string(APPEND CMAKE_C_FLAGS_DEBUG " -Og -g3 -march=native -pipe" )
+            string(APPEND CMAKE_CXX_FLAGS_DEBUG " -Og -g3 -march=native -pipe" )
+        else(_DEBUG_OPTIMIZATION_LEVEL_IS_SUPPORTED)
+            string(APPEND CMAKE_C_FLAGS_DEBUG " -O0 -g3 -march=native -pipe" )
+            string(APPEND CMAKE_CXX_FLAGS_DEBUG " -O0 -g3 -march=native -pipe" )
+        endif (_DEBUG_OPTIMIZATION_LEVEL_IS_SUPPORTED)
+    endif ("${CMAKE_CXX_COMPILER_ID}" STREQUAL "GNU" OR "${CMAKE_CXX_COMPILER_ID}" STREQUAL "Clang")
+
+    if ("${CMAKE_CXX_COMPILER_ID}" STREQUAL "MSVC")
+        set(QBT_ADDITONAL_FLAGS "-wd4290 -wd4275 -wd4251 /W4" CACHE STRING "Additional qBittorent compile flags")
+        string(APPEND CMAKE_C_FLAGS " ${QBT_ADDITONAL_FLAGS}")
+        string(APPEND CMAKE_CXX_FLAGS " ${QBT_ADDITONAL_FLAGS}")
+    endif ()
+
+# endif (NOT QBT_ADDITONAL_FLAGS)
+endmacro(qbt_set_compiler_options)
+

cmake/Modules/QbtTargetSources.cmake

@@ -0,0 +1,16 @@
+# a helper function which appends source to the main qBt target
+# sources file names are relative to the the ${qBittorrent_SOURCE_DIR}
+
+function (qbt_target_sources)
+    set (_sources_rel "")
+    foreach (_source IN ITEMS ${ARGN})
+        if (IS_ABSOLUTE "${_source}")
+            set(source_abs "${_source}")
+        else()
+            get_filename_component(_source_abs "${_source}" ABSOLUTE)
+        endif()
+        file (RELATIVE_PATH _source_rel "${qbt_executable_SOURCE_DIR}" "${_source_abs}")
+        list (APPEND _sources_rel "${_source_rel}")
+    endforeach()
+    target_sources (qBittorrent PRIVATE "${_sources_rel}")
+endfunction (qbt_target_sources)

cmake/Modules/bundle.cmake

@@ -0,0 +1,21 @@
+set(BU_CHMOD_BUNDLE_ITEMS ON)
+include(DeployQt5)
+
+set(plugins "")
+
+get_property(svgIconPluginLocation TARGET Qt5::QSvgIconPlugin
+        PROPERTY LOCATION_RELEASE)
+list(APPEND plugins "${svgIconPluginLocation}")
+get_property(svgPluginLocation TARGET Qt5::QSvgPlugin
+        PROPERTY LOCATION_RELEASE)
+list(APPEND plugins "${svgPluginLocation}")
+
+set(sfx "")
+if(APPLE)
+    set(sfx ".app")
+elseif(WIN32)
+    set(sfx "${CMAKE_EXECUTABLE_SUFFIX}")
+endif()
+
+get_target_property(exe qBittorrent OUTPUT_NAME)
+install_qt5_executable("${exe}${sfx}" "${plugins}" "" "" "")

cmake/Modules/winconf-mingw.cmake

@@ -0,0 +1,14 @@
+if (STACKTRACE_WIN)
+    if ("${WINXXBITS}" NOT STREQUAL "Win64")
+        add_compile_options(-fno-omit-frame-pointer)
+    endif ("${WINXXBITS}" NOT STREQUAL "Win64")
+    link_libraries(libdbghelp  -Wl,--export-all-symbols)
+endif (STACKTRACE_WIN)
+
+if (("${CMAKE_BUILD_TYPE}" STREQUAL "Debug") OR ("${CMAKE_BUILD_TYPE}" STREQUAL "RelWithDebInfo"))
+    link_libraries(-Wl,--dynamicbase)
+endif()
+
+# LIBS += libadvapi32 libshell32 libuser32
+# LIBS += libcrypto.dll libssl.dll libwsock32 libws2_32 libz libiconv.dll
+# LIBS += libpowrprof

cmake/Modules/winconf-msvc.cmake

@@ -0,0 +1,21 @@
+if (STACKTRACE_WIN)
+    if ("${WINXXBITS}" STREQUAL "Win64")
+        add_compile_options(-Zi)
+    else ("${WINXXBITS}" STREQUAL "Win64")
+        # i686 arch requires frame pointer preservation
+        add_compile_options(-Oy-)
+    endif ("${WINXXBITS}" STREQUAL "Win64")
+    link_libraries(dbghelp.lib)
+endif (STACKTRACE_WIN)
+
+# Enable Wide characters
+add_definitions(-DTORRENT_USE_WPATH)
+
+if (NOT QT5)
+    # Qt4 does not detect it itself
+    add_definitions(-DQ_COMPILER_INITIALIZER_LISTS)
+endif (NOT QT5)
+
+include(MacroConfigureMSVCRuntime)
+set(MSVC_RUNTIME "dynamic")
+configure_msvc_runtime()

cmake/Modules/winconf.cmake

@@ -0,0 +1,92 @@
+# Settings for compiling qBittorrent on Windows
+
+list(APPEND CMAKE_LIBRARY_PATH "$ENV{LIB}")
+
+# We want to link with static version of
+# libtorrent
+set(LibtorrentRasterbar_USE_STATIC_LIBS True)
+set(LibtorrentRasterbar_CUSTOM_DEFINITIONS
+    -DBOOST_ALL_NO_LIB -DBOOST_ASIO_HASH_MAP_BUCKETS=1021
+    -DBOOST_ASIO_SEPARATE_COMPILATION
+    -DBOOST_EXCEPTION_DISABLE
+    -DBOOST_SYSTEM_STATIC_LINK=1
+    -DTORRENT_USE_OPENSSL
+    -D__USE_W32_SOCKETS
+    -D_FILE_OFFSET_BITS=64)
+
+add_definitions(-DUNICODE
+    -D_UNICODE
+    -DWIN32
+    -D_WIN32
+    -DWIN32_LEAN_AND_MEAN
+    -DNTDDI_VERSION=0x05010000
+    -D_WIN32_WINNT=0x0501
+    -D_WIN32_IE=0x0501
+    -D_CRT_SECURE_NO_DEPRECATE
+    -D_SCL_SECURE_NO_DEPRECATE
+    -DNOMINMAX
+)
+# and boost
+set(Boost_USE_STATIC_LIBS  True)
+# set(Boost_USE_STATIC_RUNTIME True)
+
+# Here we assume that all required libraries are installed into the same prefix
+# with usual unix subdirectories (bin, lib, include)
+# if so, we just need to set CMAKE_SYSTEM_PREFIX_PATH
+# If it is not the case, individual paths need to be specified manually (see below)
+set(COMMON_INSTALL_PREFIX "c:/usr" CACHE PATH "Prefix used to install all the required libraries")
+list(APPEND CMAKE_SYSTEM_PREFIX_PATH "${COMMON_INSTALL_PREFIX}")
+
+# If two version of Qt are installed, separate prefixes are needed most likely
+set(QT4_INSTALL_PREFIX "${COMMON_INSTALL_PREFIX}/lib/qt4" CACHE PATH "Prefix where Qt4 is installed")
+set(QT5_INSTALL_PREFIX "${COMMON_INSTALL_PREFIX}/lib/qt5" CACHE PATH "Prefix where Qt5 is installed")
+
+# it is safe to set Qt dirs even if their files are directly in the prefix
+# Qt4
+if(NOT QT5)
+    # for qt 4 we need qmake, Qt5 provides cmake config files
+    LIST(APPEND CMAKE_PROGRAM_PATH  "${QT4_INSTALL_PREFIX}/bin/")
+endif(NOT QT5)
+
+# Qt5
+set(Qt5_DIR "${QT5_INSTALL_PREFIX}/lib/cmake/Qt5")
+
+# And now we can set specific values for the Boost and libtorrent libraries.
+# The following values are generated from the paths listed above just for an example
+# they have to be set to actual locations
+
+# Boost
+# set(BOOST_ROOT "${COMMON_INSTALL_PREFIX}")
+# set(Boost_version_suffix "1_59")
+# if a link like boost-version/boost -> boost was created or the boost directory was renamed in the same way,
+# the following needs adjustment
+# set(BOOST_INCLUDEDIR "${COMMON_INSTALL_PREFIX}/include/boost-${Boost_version_suffix}")
+# set(BOOST_LIBRARYDIR "${COMMON_INSTALL_PREFIX}/lib/")
+
+# libtorrent
+
+# set(PC_LIBTORRENT_RASTERBAR_INCLUDEDIR "${COMMON_INSTALL_PREFIX}")
+# set(PC_LIBTORRENT_RASTERBAR_LIBDIR "${COMMON_INSTALL_PREFIX}/lib")
+
+set(AUTOGEN_TARGETS_FOLDER "generated")
+
+set(CMAKE_INSTALL_BINDIR ".")
+
+# Test 32/64 bits
+if("${CMAKE_SIZEOF_VOID_P}" EQUAL "8")
+    message(STATUS "Target is 64 bits")
+    if (WIN32)
+        set(WINXXBITS Win64)
+    endif(WIN32)
+else("${CMAKE_SIZEOF_VOID_P}" EQUAL "8")
+    message(STATUS "Target is 32 bits")
+    if (WIN32)
+        set(WINXXBITS Win32)
+    endif(WIN32)
+endif("${CMAKE_SIZEOF_VOID_P}" EQUAL "8")
+
+if (MSVC)
+    include(winconf-msvc)
+else (MSVC)
+    include(winconf-mingw)
+endif (MSVC)

conf.pri.in

@@ -0,0 +1,24 @@
+# @configure_input@
+
+PREFIX = @EXPAND_PREFIX@
+BINDIR = @EXPAND_BINDIR@
+DATADIR = @EXPAND_DATADIR@
+MANPREFIX = @EXPAND_MANDIR@
+
+QMAKE_CXXFLAGS += @QBT_CONF_EXTRA_CFLAGS@
+
+EXTERNAL_INCLUDES = @QBT_CONF_INCLUDES@
+EXTERNAL_INCLUDES -= $$QMAKE_DEFAULT_INCDIRS
+# added /usr/local/include due to Qt 5.7.0 bug on macOS
+macx: EXTERNAL_INCLUDES += "/usr/local/include"
+INCLUDEPATH += $$EXTERNAL_INCLUDES
+
+EXTERNAL_LIBS = @LDFLAGS@ @LIBS@
+EXTERNAL_LIBS -= $$QMAKE_DEFAULT_LIBDIRS
+LIBS += $$EXTERNAL_LIBS
+
+CONFIG += @QBT_ADD_CONFIG@
+CONFIG -= @QBT_REMOVE_CONFIG@
+
+DEFINES += @QBT_ADD_DEFINES@
+DEFINES -= @QBT_REMOVE_DEFINES@

conf.pri.windows

@@ -0,0 +1,61 @@
+# Adapt these paths
+# Point these to the include folders
+INCLUDEPATH += $$quote(C:/qBittorrent/boost)
+INCLUDEPATH += $$quote(C:/qBittorrent/libtorrent/include)
+INCLUDEPATH += $$quote(C:/qBittorrent/zlib/include)
+INCLUDEPATH += $$quote(C:/qBittorrent/openssl/include)
+# Point these to the lib folders
+LIBS += $$quote(-LC:/qBittorrent/boost/stage/lib)
+LIBS += $$quote(-LC:/qBittorrent/libtorrent/lib)
+LIBS += $$quote(-LC:/qBittorrent/zlib/lib)
+LIBS += $$quote(-LC:/qBittorrent/openssl/lib)
+
+# Adapt the lib names/versions accordingly
+# If you want to use Boost auto-linking then disable
+# BOOST_ALL_NO_LIB below and omit Boost libraries here
+CONFIG(debug, debug|release) {
+    LIBS += libtorrentd.lib \
+            libboost_system-vc140-mt-sgd-1_64.lib
+}
+else {
+    LIBS += libtorrent.lib \
+            libboost_system-vc140-mt-s-1_64.lib
+}
+LIBS += libeay32.lib ssleay32.lib
+LIBS += zlib.lib
+# ...or if you use MinGW
+#CONFIG(debug, debug|release) {
+#    LIBS += libtorrent-rasterbar \
+#            libboost_system-mt
+#}
+#else {
+#    LIBS += libtorrent-rasterbar \
+#            libboost_system-mt
+#}
+#LIBS += libcrypto libssl
+#LIBS += libz
+
+DEFINES += NTDDI_VERSION=0x05010000
+DEFINES += _WIN32_WINNT=0x0501
+DEFINES += _WIN32_IE=0x0501
+
+# Disable to use Boost auto-linking
+DEFINES += BOOST_ALL_NO_LIB
+# Use one of the following options
+DEFINES += BOOST_SYSTEM_STATIC_LINK
+#DEFINES += BOOST_SYSTEM_DYN_LINK
+# Boost 1.60+ defaults to Vista+ support. The define below enables XP support again.
+DEFINES += BOOST_USE_WINAPI_VERSION=0x0501
+# Enable if building against libtorrent 1.0.x (RC_1_0) (static linking)
+#DEFINES += BOOST_ASIO_SEPARATE_COMPILATION
+# Enable if building against libtorrent 1.0.x (RC_1_0) (dynamic linking)
+#DEFINES += BOOST_ASIO_DYN_LINK
+
+# Enable if building against libtorrent 1.1.x (RC_1_1)
+# built with this flag defined
+#DEFINES += TORRENT_NO_DEPRECATE
+# Enable if linking dynamically against libtorrent
+#DEFINES += TORRENT_LINKING_SHARED
+
+# Enable stack trace support
+CONFIG += strace_win

configure.ac

@@ -0,0 +1,236 @@
+AC_INIT([qbittorrent], [v3.2.0alpha], [bugs.qbittorrent.org], [], [http://www.qbittorrent.org/])
+AC_CONFIG_AUX_DIR([build-aux])
+AC_CONFIG_MACRO_DIR([m4])
+AC_PROG_CC
+AC_PROG_CXX
+AC_PROG_SED
+AC_LANG(C++)
+AC_CANONICAL_HOST
+AM_INIT_AUTOMAKE
+
+
+
+# Define --wth-* and --enable-* arguments
+
+AC_ARG_WITH(qtsingleapplication,
+            [AS_HELP_STRING([--with-qtsingleapplication=@<:@system|shipped@:>@],
+                            [Use the shipped qtsingleapplication library or the system one (default=shipped)])],
+            [],
+            [with_qtsingleapplication=shipped])
+
+AC_ARG_ENABLE(debug,
+              [AS_HELP_STRING([--enable-debug],
+                              [Enable debug build])],
+              [],
+              [enable_debug=no])
+
+AC_ARG_ENABLE(gui,
+              [AS_HELP_STRING([--disable-gui],
+                              [Disable the GUI for headless running. Disables QtDBus and the GeoIP Database.])],
+              [],
+              [enable_gui=yes])
+
+AC_ARG_ENABLE(systemd,
+              [AS_HELP_STRING([--enable-systemd],
+                              [Install the systemd service file (headless only).])],
+              [],
+              [enable_systemd=no])
+
+AC_ARG_ENABLE(webui,
+              [AS_HELP_STRING([--disable-webui],
+                              [Disable the WebUI.])],
+              [],
+              [enable_webui=yes])
+
+AC_ARG_ENABLE(qt-dbus,
+              [AS_HELP_STRING([--disable-qt-dbus],
+                              [Disable use of QtDBus (GUI only)])],
+              [],
+              [enable_qt_dbus=yes])
+
+# Detect OS
+AC_MSG_CHECKING([whether OS is FreeBSD])
+AS_IF([expr "$host_os" : ".*freebsd.*" > /dev/null],
+      [AC_MSG_RESULT([yes])
+      LIBS="-lexecinfo $LIBS"],
+      [AC_MSG_RESULT([no])])
+
+AC_MSG_CHECKING([whether OS is macOS])
+AS_IF([expr "$host_os" : ".*darwin.*" > /dev/null],
+      [AC_MSG_RESULT([yes])
+      enable_qt_dbus=no],
+      [AC_MSG_RESULT([no])])
+
+# Require 0.23 pkg-config
+PKG_PROG_PKG_CONFIG([0.23])
+AS_IF([test "x$PKG_CONFIG" = "x"],
+      [AC_MSG_ERROR([Could not find pkg-config])])
+
+# Check which arguments were set and act accordingly
+AC_MSG_CHECKING([whether to enable the Debug build])
+AS_CASE(["x$enable_debug"],
+        ["xno"],
+              [AC_MSG_RESULT([no])
+              QBT_ADD_CONFIG="$QBT_ADD_CONFIG release"
+              QBT_REMOVE_CONFIG="$QBT_REMOVE_CONFIG debug"],
+        ["xyes"],
+               [AC_MSG_RESULT([yes])
+               QBT_ADD_CONFIG="$QBT_ADD_CONFIG debug"
+               QBT_REMOVE_CONFIG="$QBT_REMOVE_CONFIG release"],
+        [AC_MSG_RESULT([$enable_debug])
+        AC_MSG_ERROR([Unknown option "$enable_debug". Use either "yes" or "no".])])
+
+AC_MSG_CHECKING([whether to enable the GUI])
+AS_CASE(["x$enable_gui"],
+        ["xyes"],
+               [AC_MSG_RESULT([yes])
+               enable_systemd=[no]
+               QBT_REMOVE_CONFIG="$QBT_REMOVE_CONFIG nogui"],
+        ["xno"],
+              [AC_MSG_RESULT([no])
+              enable_qt_dbus=[no]
+              QBT_ADD_CONFIG="$QBT_ADD_CONFIG nogui"],
+        [AC_MSG_RESULT([$enable_gui])
+        AC_MSG_ERROR([Unknown option "$enable_gui". Use either "yes" or "no".])])
+
+AC_MSG_CHECKING([whether to install the systemd service file])
+AS_CASE(["x$enable_systemd"],
+        ["xyes"],
+               [AC_MSG_RESULT([yes])
+               QBT_ADD_CONFIG="$QBT_ADD_CONFIG systemd"],
+        ["xno"],
+              [AC_MSG_RESULT([no])
+              QBT_REMOVE_CONFIG="$QBT_REMOVE_CONFIG systemd"],
+        [AC_MSG_RESULT([$enable_systemd])
+        AC_MSG_ERROR([Unknown option "$enable_systemd". Use either "yes" or "no".])])
+
+AC_MSG_CHECKING([whether to enable the WebUI])
+AS_CASE(["x$enable_webui"],
+        ["xyes"],
+               [AC_MSG_RESULT([yes])
+               QBT_REMOVE_CONFIG="$QBT_REMOVE_CONFIG nowebui"],
+        ["xno"],
+              [AC_MSG_RESULT([no])
+              QBT_ADD_CONFIG="$QBT_ADD_CONFIG nowebui"],
+        [AC_MSG_RESULT([$enable_webui])
+        AC_MSG_ERROR([Unknown option "$enable_webui". Use either "yes" or "no".])])
+
+FIND_QT5()
+AS_IF([test "x$QT_QMAKE" = "x"],
+      [AC_MSG_ERROR([Could not find qmake])
+      ])
+AS_IF([test "x$enable_gui" = "xyes"],
+      [PKG_CHECK_MODULES(Qt5Svg, [Qt5Svg >= 5.5.1])
+      ])
+AC_MSG_CHECKING([whether QtDBus should be enabled])
+AS_CASE(["x$enable_qt_dbus"],
+        ["xyes"],
+               [AC_MSG_RESULT([yes])
+               FIND_QTDBUS()
+               AS_IF([test "x$HAVE_QTDBUS" = "xfalse"],
+                     [AC_MSG_ERROR([Could not find QtDBus])],
+                     [QBT_ADD_CONFIG="$QBT_ADD_CONFIG dbus"]
+                    )],
+        ["xno"],
+              [AC_MSG_RESULT([no])
+              QBT_REMOVE_CONFIG="$QBT_REMOVE_CONFIG dbus"],
+        [AC_MSG_RESULT([$enable_qt_dbus])
+        AC_MSG_ERROR([Unknown option "$enable_qt_dbus". Use either "yes" or "no".])])
+
+
+AX_BOOST_BASE([1.35],
+              [AC_MSG_NOTICE([Boost CPPFLAGS: "$BOOST_CPPFLAGS"
+                Boost LDFLAGS: "$BOOST_LDFLAGS"])],
+              [AC_MSG_ERROR([Could not find Boost])])
+CPPFLAGS="$BOOST_CPPFLAGS $CPPFLAGS"
+LDFLAGS="$BOOST_LDFLAGS $LDFLAGS"
+
+AX_BOOST_SYSTEM()
+AC_MSG_NOTICE([Boost.System LIB: "$BOOST_SYSTEM_LIB"])
+LIBS="$BOOST_SYSTEM_LIB $LIBS"
+
+AC_MSG_CHECKING([which qtsingleapplication to use])
+AS_CASE(["x$with_qtsingleapplication"],
+        ["xshipped"],
+                   [AC_MSG_RESULT([shipped])
+                   QBT_REMOVE_CONFIG="$QBT_REMOVE_CONFIG usesystemqtsingleapplication"],
+        ["xsystem"],
+                  [AC_MSG_RESULT([system])
+                  QBT_ADD_CONFIG="$QBT_ADD_CONFIG usesystemqtsingleapplication"],
+        [AC_MSG_RESULT([$with_qtsingleapplication])
+        AC_MSG_ERROR([Unknown option "$with_qtsingleapplication". Use either "system" or "shipped".])])
+
+PKG_CHECK_MODULES(libtorrent,
+                  [libtorrent-rasterbar >= 1.0.6],
+                  [CPPFLAGS="$libtorrent_CFLAGS $CPPFLAGS"
+                  LIBS="$libtorrent_LIBS $LIBS"])
+
+PKG_CHECK_MODULES(zlib,
+                 [zlib >= 1.2.5.2],
+                 [CPPFLAGS="$zlib_CFLAGS $CPPFLAGS"
+                 LIBS="$zlib_LIBS $LIBS"])
+
+# These are required because autoconf doesn't expand these **particular**
+# vars automatically. And qmake cannot autoexpand them.
+AX_DEFINE_DIR([EXPAND_PREFIX], [prefix])
+AX_DEFINE_DIR([EXPAND_BINDIR], [bindir])
+AX_DEFINE_DIR([EXPAND_DATADIR], [datadir])
+AX_DEFINE_DIR([EXPAND_MANDIR], [mandir])
+
+# Original extract() function contributed by pmzqla
+# $*: Strings to parse
+# Set $QBT_CONF_DEFINES, $QBT_CONF_INCLUDES, $QBT_CONF_EXTRA_CFLAGS
+extract() {
+  if [[ -z "$*" ]]; then
+    echo "Input string required"
+    return 1
+  fi
+
+  # BSD sed needs an actual newline character in the substitute command
+  new_line='
+'
+  # Convert " -" to "\n" if not between quotes and remove possible leading white spaces
+  string=$(echo " $*" | $SED -e "s: -:\\${new_line}:g" -e 's:"\(.*\)\n\(.*\)":\"\1 -\2":g' -e "s:'\(.*\)\n\(.*\)':\'\1 -\2':g" -e 's/^[[:space:]]*//')
+  SAVEIFS=$IFS
+  IFS=$(printf "\n\b")
+  for i in $string; do
+    case "$(echo "$i" | cut -c1)" in
+      '') ;;
+      D) QBT_CONF_DEFINES="$(echo $i | cut -c2-) $QBT_CONF_DEFINES";;
+      I) QBT_CONF_INCLUDES="$(echo $i | cut -c2-) $QBT_CONF_INCLUDES";;
+      *) QBT_CONF_EXTRA_CFLAGS="-$i $QBT_CONF_EXTRA_CFLAGS";;
+    esac
+  done
+  IFS=$SAVEIFS
+}
+
+extract $CPPFLAGS
+QBT_ADD_DEFINES="$QBT_ADD_DEFINES $QBT_CONF_DEFINES"
+QBT_CONF_EXTRA_CFLAGS="$QBT_CONF_EXTRA_CFLAGS $CXXFLAGS"
+
+# Substitute the values of these vars in conf.pri.in
+AC_SUBST(QBT_CONF_INCLUDES)
+AC_SUBST(QBT_CONF_EXTRA_CFLAGS)
+AC_SUBST(QBT_ADD_CONFIG)
+AC_SUBST(QBT_REMOVE_CONFIG)
+AC_SUBST(QBT_ADD_DEFINES)
+AC_SUBST(QBT_REMOVE_DEFINES)
+
+AC_OUTPUT(conf.pri)
+AS_IF([test "x$enable_systemd" = "xyes"],
+      [AC_OUTPUT(dist/unix/systemd/qbittorrent-nox@.service)])
+
+
+
+AC_MSG_NOTICE([Running qmake to generate the makefile...])
+CONFDIR="$( cd "$( dirname "$0" )" && pwd )"
+
+$QT_QMAKE -r [$CONFDIR]/qbittorrent.pro "QMAKE_LRELEASE=$QMAKE_LRELEASE"
+
+ret="$?"
+
+AS_ECHO()
+AS_IF([test "x$ret" = "x0"],
+      [AC_MSG_NOTICE([Good, your configure finished.])],
+      [AC_MSG_ERROR([Failed running $QT_QMAKE to generate the makefile])])
+AS_ECHO()

dist/CMakeLists.txt

@@ -1,7 +1,10 @@
-if (CMAKE_SYSTEM_NAME STREQUAL "Darwin")
+if (APPLE)
     add_subdirectory(mac)
-elseif (UNIX AND (NOT APPLE))
-    add_subdirectory(unix)
-elseif (CMAKE_SYSTEM_NAME STREQUAL "Windows")
-    add_subdirectory(windows)
-endif()
+else (APPLE)
+    if (UNIX)
+        add_subdirectory(unix)
+    endif (UNIX)
+    if (WIN32)
+        add_subdirectory(windows)
+    endif (WIN32)
+endif (APPLE)

dist/mac/CMakeLists.txt

@@ -1 +0,0 @@
-# empty

dist/mac/Info.plist

@@ -2,10 +2,6 @@
 <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
 <plist version="1.0">
 <dict>
-	<key>CFBundleDevelopmentRegion</key>
-	<string>en</string>
-	<key>CFBundleDisplayName</key>
-	<string>qBittorrent</string>
 	<key>CFBundleDocumentTypes</key>
 	<array>
 		<dict>
@@ -25,10 +21,6 @@
 			<array>
 				<string>org.bittorrent.torrent</string>
 			</array>
-			<key>NSExportableTypes</key>
-			<array>
-				<string>org.bittorrent.torrent</string>
-			</array>
 			<key>LSIsAppleDefaultForType</key>
 			<true/>
 		</dict>
@@ -36,8 +28,6 @@
 	<key>CFBundleURLTypes</key>
 	<array>
 		<dict>
-			<key>CFBundleTypeRole</key>
-			<string>Viewer</string>
 			<key>CFBundleURLSchemes</key>
 			<array>
 				<string>magnet</string>
@@ -47,7 +37,7 @@
 		</dict>
 	</array>
 	<key>CFBundleName</key>
-	<string>qBittorrent</string>
+	<string>@EXECUTABLE@</string>
 	<key>CFBundleIconFile</key>
 	<string>qbittorrent_mac.icns</string>
 	<key>CFBundleInfoDictionaryVersion</key>
@@ -55,19 +45,21 @@
 	<key>CFBundlePackageType</key>
 	<string>APPL</string>
 	<key>CFBundleShortVersionString</key>
-	<string>5.0.2</string>
+	<string>4.0.1</string>
+	<key>CFBundleSignature</key>
+	<string>qBit</string>
 	<key>CFBundleExecutable</key>
-	<string>${EXECUTABLE_NAME}</string>
+	<string>@EXECUTABLE@</string>
 	<key>CFBundleIdentifier</key>
-	<string>org.qbittorrent.qBittorrent</string>
-	<key>LSMinimumSystemVersion</key>
-	<string>${MACOSX_DEPLOYMENT_TARGET}.0</string>
+	<string>org.qbittorrent</string>
 	<key>NSPrincipalClass</key>
 	<string>NSApplication</string>
+	<key>NSHighResolutionCapable</key>
+	<string>True</string>
 	<key>NSAppleScriptEnabled</key>
 	<string>YES</string>
 	<key>NSHumanReadableCopyright</key>
-	<string>Copyright © 2006-2024 The qBittorrent project</string>
+	<string>Copyright © 2006-2017 The qBittorrent project</string>
 	<key>UTExportedTypeDeclarations</key>
 	<array>
 		<dict>
@@ -84,21 +76,17 @@
 			<key>UTTypeIdentifier</key>
 			<string>org.bittorrent.torrent</string>
 			<key>UTTypeReferenceURL</key>
-			<string>https://www.bittorrent.org/beps/bep_0000.html</string>
+			<string>http://www.bittorrent.org/beps/bep_0000.html</string>
 			<key>UTTypeTagSpecification</key>
 			<dict>
 				<key>com.apple.ostype</key>
-				<array>
-					<string>TORR</string>
-				</array>
+				<string>TORR</string>
 				<key>public.filename-extension</key>
 				<array>
 					<string>torrent</string>
 				</array>
 				<key>public.mime-type</key>
-				<array>
-					<string>application/x-bittorrent</string>
-				</array>
+				<string>application/x-bittorrent</string>
 			</dict>
 		</dict>
 	</array>